振动往复螺旋清洗机构及其防垢性能

doi:10.3969/j.issn.0438-1157.2013.09.013

化工学报 ›› 2013, Vol. 64 ›› Issue (9): 3168-3174.DOI: 10.3969/j.issn.0438-1157.2013.09.013

振动往复螺旋清洗机构及其防垢性能

彭德其¹, 史冰乐¹, 俞天兰¹, 俞天翔², 刘阳平¹, 叶磊¹

1. 湘潭大学机械工程学院, 湖南湘潭 411105;
2. 湖南化工职业技术学院, 湖南株洲 412008

收稿日期:2012-12-23 修回日期:2013-04-15 出版日期:2013-09-05 发布日期:2013-09-05
通讯作者: 彭德其(1972- ),男,博士,教授
作者简介:彭德其(1972- ),男,博士,教授。
基金资助:
湖南省自然科学基金项目(11JJ9003)。

Cleaning mechanism and scale prevention of reciprocating and vibrating spiral-insert

PENG Deqi¹, SHI Bingle¹, YU Tianlan¹, YU Tianxiang², LIU Yangping¹, YE Lei¹

1. School of Mechanical Engineering, Xiangtan University, Xiangtan 411105, Hunan, China;
2. Hunan Chemical Vocational Technology College, Zhuzhou 412008, Hunan, China

Received:2012-12-23 Revised:2013-04-15 Online:2013-09-05 Published:2013-09-05
Supported by:
supported by the Natural Science Foundation of Hunan Province(11JJ9003).

摘要/Abstract

摘要： 针对换热管内振动螺旋线清洗技术所存在的防除垢不均匀问题,提出振动往复螺旋清洗机构。利用流体动力周期性改变管口局部流动阻力方式造成管内流速波动,从而引起换热管内振动螺旋对污垢的轴向往复刮擦,达到均匀清除管内壁污垢的目的。通过试验研究得到挡板机构的流量特性曲线,并理论分析推导得到该机构作用下管内流速的计算公式,以及使振动螺旋线产生不小于一个螺距的轴向往复行程时所对应的挡板开度的计算方法。进一步证明了振动往复螺旋的防除垢性能要比单纯的振动螺旋好,相同试验条件下其传热系数比光管和振动螺旋分别提高60%和20%,并延缓结垢速率;而无垢时两者的强化传热效果相当。

关键词: 往复螺旋线, 在线清洗, 流体动力, 流量特性, 防垢性能

Abstract: To solve the problem of non-uniform fouling removal and scale prevention in the heat exchanger tube with vibrating spiral-insert cleaning technology,a vibrating and reciprocating spiral-insert cleaning mechanism is put forward.It makes use of the hydrodynamic force to change the local flow resistance at the tube outlet periodically to cause velocity fluctuation in the tube,so that the vibratory spiral-insert in the tube scratches the fouling with axial reciprocating movement and the fouling on the inside wall can be removed uniformly.The flow characteristic of the baffle is obtained by experimental study.The computation formula for velocity in the tube with the effect of baffle and the computation method for the baffle opening,which makes the vibration spiral-insert produce an axial reciprocating stroke not less than a pitch,are obtained by theoretical analysis.The test proves that the fouling removal and prevention with the vibrating and reciprocating spiral-insert is more effective.Under the same experimental conditions,the heat transfer coefficient is increased by 60% and 20%,respectively,compared to empty tube and vibration spiral.Moreover,the scaling speed is reduced.

Key words: reciprocating spiral-insert, online fouling removal, hydrodynamic, flow characteristics, scale prevention

中图分类号:

TQ051.5

彭德其, 史冰乐, 俞天兰, 俞天翔, 刘阳平, 叶磊. 振动往复螺旋清洗机构及其防垢性能[J]. 化工学报, 2013, 64(9): 3168-3174.

PENG Deqi, SHI Bingle, YU Tianlan, YU Tianxiang, LIU Yangping, YE Lei. Cleaning mechanism and scale prevention of reciprocating and vibrating spiral-insert[J]. CIESC Journal, 2013, 64(9): 3168-3174.

参考文献 16

[1]	Jiang Peng(姜鹏),Yan Hua(阎华),Zhang Zhen(张震),Yang Weimin(杨卫民).Development on heat exchanger inserts research[J].Guangzhou Chemical Industry(广州化工),2011,39(20):1-2,19
[2]	Yu Xiumin(俞秀民),Yu Tianlan(俞天兰),Ye Shiren(叶施仁).Experimental study on heat transfer technology of automatically rotating spiral[J].Chemical Equipment Technology(化工装备技术),1997,18(5):4-8
[3]	Yu Tianlan(俞天兰),Liu Guiying(刘桂英),Yu Xiumin(俞秀民).Automatic cleaning and heat transfer enhancing technology for intensified steel spiral with plastic coat on driving wheel[J].Journal of Engineering Design(工程设计学报),2006,13(2):95-98
[4]	Estienne Partrick,Sanson Michel.System for cleaning tube-type exchangers automatically during operation[P]:US,4583585.1986-04-22
[5]	Yang Shanrang(杨善让),Zhai Guodong(翟国冬),Li Xuewu(李学武).The spiral descaling device and heat transfer enhancement purposes[P]:CN,87108259. 4. 1989-07-12
[6]	Dou Mei(窦梅),Nan Suifei(南碎飞),Duan Peiqing(段培清).Experimental research on anti-fouling of heat exchanger by inserted spring and pulse flow[J].Journal of Chemical Engineering of Chinese Universities(高校化学工程学报),2010,24(5):893-896
[7]	Zhang Yuping(张余平).Experimental research on flux characteristic of valves[J].Measurement and Control Technology(测控技术),2008,27(suppl.):256-259
[8]	Zheng Hongli(郑红丽),Pang Xiuwei(庞秀伟).The discussion flow control,regulating range and flow characteristic[J].Boiler Manufacturing(锅炉制造),2007,4:59-61,64
[9]	Yang Shizhong(杨世忠),Xing Lijuan(邢丽娟).The flow characteristic analysis and application selection of regulating valve[J].Valve(阀门),2006,5:33-36
[10]	Lu Peiwen(陆培文).Utility Valve Manual(实用阀门设计手册)[M].Beijing:Machinery Industry Press,2002:26-28
[11]	Xia Qing(夏清),Chen Changgui(陈常贵).Principles of Chemical Engineering(化工原理)[M].Tianjin:Tianjin University Press,2008:56-57
[12]	Yao Shouguang(姚寿广),Zhou Genming(周根明),Zhu Deshu(朱德书).Heat transfer enhancement test and structural optimization of interpolation helical coil tube[J].Power Engineering(动力工程),1998,18(5):29-31,72
[13]	Yu Tianlan(俞天兰),Peng Deqi(彭德其),Yu Tianxiang(俞天翔).Dynamic optimization on self-cleaning and rotating steel spiral with plastic coat[J].Mechanics in Engineering(力学与实践),2012,34(2):54-57
[14]	Xu Jianmin,Xiong Wen,Pi Wei.Heat-transfer experimental study of built-in self-vibrating spring heat exchange tube[J].Petro-Chemical Equipment,2010,39(3):9-12
[15]	Zhang Zhongbin(张仲彬),Xu Zhiming(徐志明),Qiu Zhenbo(邱振波).Experimental investigation on effect of surface and flow characteristics on the induction period of fouling[J].Journal of Engineering Thermophysics(工程热物理学报),2009,30(1):144-146
[16]	Yang Qingfeng(杨庆峰),Gu Anzhong(顾安忠),Ding Jie(丁洁),Shen Ziqiu(沈自求).Calcium carbonate fouling behavior and morphology[J].Journal of Chemical Industry and Engineering(China)(化工学报),2002,53(9):924-930

振动往复螺旋清洗机构及其防垢性能

Cleaning mechanism and scale prevention of reciprocating and vibrating spiral-insert

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 16

相关文章 15

编辑推荐

Metrics

本文评价

[1]	肖明堃, 杨光, 黄永华, 吴静怡. 浸没孔液氧气泡动力学数值研究[J]. 化工学报, 2023, 74(S1): 87-95.
[2]	杨越, 张丹, 郑巨淦, 涂茂萍, 杨庆忠. NaCl水溶液喷射闪蒸-掺混蒸发的实验研究[J]. 化工学报, 2023, 74(8): 3279-3291.
[3]	何宣志, 何永清, 闻桂叶, 焦凤. 磁液液滴颈部自相似破裂行为[J]. 化工学报, 2023, 74(7): 2889-2897.
[4]	张伟政, 赵吉军, 马学忠, 张琦璇, 庞益祥, 张俊涛. 湍流效应对高速机械密封端面型槽冷却性能影响分析[J]. 化工学报, 2023, 74(3): 1228-1238.
[5]	罗佳, 吴双应, 肖兰, 周世耀, 陈志莉. 撞击速度对连续液滴撞击热圆柱壁面局部传热特性影响的实验[J]. 化工学报, 2022, 73(7): 2944-2951.
[6]	苏晓辉, 张弛, 徐志锋, 金辉, 王治国. 黏弹性表面活性剂溶液中颗粒沉降特性研究[J]. 化工学报, 2022, 73(5): 1974-1985.
[7]	成文凯, 张先明, 王嘉骏, 冯连芳. 卧式单轴捏合反应器流动与混合特性的数值模拟[J]. 化工学报, 2022, 73(5): 1995-2007.
[8]	徐祖良, 汪宇昊, 赵辉, 周骛, 蔡小舒, 刘海峰. 同轴四通道喷嘴气流式雾化特性影响因素研究[J]. 化工学报, 2022, 73(2): 604-611.
[9]	刘成治, 李春曦, 周静宜, 叶学民. 溶质Marangoni效应对降膜流动稳定性的影响[J]. 化工学报, 2022, 73(12): 5405-5413.
[10]	杨蕊, 朱宝锦, 吕超, 张磊, 肖迎松. 脉动条件下旋流场内气液两相流流型及其转变机理[J]. 化工学报, 2022, 73(10): 4389-4398.
[11]	成文凯, 张先明, 王嘉骏, 冯连芳. 反向旋转卧式双轴捏合反应器混合特性的数值模拟[J]. 化工学报, 2022, 73(1): 162-174.
[12]	王佳星, 赵家睿, 李斯特, 付媛, 刘凤杰, 韦昌. 不同放汽阀流量特性对弹射过程的影响规律[J]. 化工学报, 2021, 72(S1): 318-325.
[13]	聂新斌, 张德浩, 颜伟城. 功能型微泡材料的研究进展[J]. 化工学报, 2021, 72(8): 3984-3996.
[14]	任辉, 王宏, 朱恂, 陈蓉, 廖强, 丁玉栋. 润湿性图案表面上的液滴侧向弹跳行为[J]. 化工学报, 2021, 72(8): 4255-4266.
[15]	许峻, 王智峰, 侯凯军, 高永福, 范怡平, 卢春喜. 双层喷嘴进料提升管内气固流动混合特性的大型冷模实验研究[J]. 化工学报, 2021, 72(8): 4019-4029.