正反向同时引发ATRP制备凹凸棒土/聚苯乙烯杂化粒子

doi:10.11949/j.issn.0438-1157.20171203

化工学报 ›› 2018, Vol. 69 ›› Issue (5): 2299-2308.DOI: 10.11949/j.issn.0438-1157.20171203

• 材料化学工程与纳米技术 • 上一篇下一篇

正反向同时引发ATRP制备凹凸棒土/聚苯乙烯杂化粒子

张翱¹, 杨海存¹, 马文中¹, 李玉雪¹, 龚方红^1,2, 陶国良¹, 刘春林¹

1. 常州大学材料科学与工程学院, 常州大学材料科学与工程国家级实验教学示范中心, 江苏常州 213164;
2. 无锡职业技术学院机械技术学院, 江苏无锡 214121

收稿日期:2017-09-01 修回日期:2017-09-18 出版日期:2018-05-05 发布日期:2018-05-05
通讯作者: 龚方红, 杨海存
基金资助:
国家自然科学基金项目（21406017）；江苏省产学研前瞻性联合研究项目（BY2015020-01）；江苏高校品牌专业建设工程资助项目；江苏高校优势学科建设工程资助项目。

Preparation of attapulgite/polystyrene hybrid particles via simultaneous reverse and normal initiation atom transfer radical polymerization

ZHANG Ao¹, YANG Haicun¹, MA Wenzhong¹, LI Yuxue¹, GONG Fanghong^1,2, TAO Guoliang¹, LIU Chunlin¹

1. National Experimental Demonstration Center for Materials Science and Engineering, School of Materials Science and Engineering, Changzhou University, Changzhou 213164, Jiangsu, China;
2. School of Mechanical Technology, Wuxi Institute of Technology, Wuxi 214121, Jiangsu, China

Received:2017-09-01 Revised:2017-09-18 Online:2018-05-05 Published:2018-05-05
Supported by:
supported by the National Natural Science Foundation of China (21406017), the Industry-University Prospective Joint Research Project of Jiangsu Province (BY2015020-01), the Top-notch Academic Programs Project of Jiangsu Higher Education Institutions (TAPP) and the Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD).

摘要/Abstract

摘要：

通过脱醇法在凹凸棒土（ATP）表面接枝γ-氨丙基三乙氧基硅烷（APTES）实现氨基化（ATP-APTES），再经酰胺化反应接枝α-溴代异丁酰溴，从而在ATP表面固载ATRP引发基团（ATP-Br）；最后以2，2-偶氮二异丁腈（AIBN）和ATP-Br为双组分引发体系进行正反向同时引发原子转移自由基聚合（SR&NI ATRP）制备ATP接枝聚苯乙烯杂化粒子（ATP@PS）。结果表明AIBN结合ATP-Br引发体系进行SR&NI ATRP具有活性/可控聚合的特征，随催化剂用量增大，体系过早偏离一级动力学行为。聚合温度在80℃，投料比为单体/催化剂/AIBN/ATP-Br=200/0.3/0.05/0.5的条件下，接枝聚合物和游离聚合物分子量差异随转化率（c）增大逐渐增加，转化率为31.1%时，两者分子量分布（PDI）均保持在1.54以下，ATP-Br表面ATRP引发基团的引发效率为6.3%。杂化粒子在PS基体中分散得到明显改善。

关键词: 凹凸棒土, 苯乙烯, SR&NI ATRP, 聚合, 合成, 粒子

Abstract:

Attapulgite (ATP) hybrid particles were prepared via a simultaneous reverse and normal initiation atom transfer radical polymerization (SR&NI ATRP). ATP was first activated with hydrochloric acid to enhance the surface reactivity, and γ-aminopropyltriethoxysilane (APTES) was chemically bounded on the surface of ATP (ATP-APTES) via dealcoholization reaction. Then, ATP with ATRP initiating groups (ATP-Br) was prepared by amidation reaction between ATP-APTES and α-bromoisobutyryl bromide. Finally, SR&NI ATRP of styrene was conducted using copper bromide (CuBr₂) complex tris(2-(dimethylamino)ethyl)amine (Me₆-TREN) as the highly active catalytic system, initiated by 2,2-azobis(isobutyronitrile) (AIBN) and ATP-Br as a dual-component initiation system, and hybrid ATP particles grafted with polystyrene (ATP@PS) was obtained. The whole procedure was traced by gas chromatography (GC), Fourier transform infrared spectroscopy (FTIR), thermo gravimetric analysis (TGA), and X-ray photoelectron electron microscopy (TEM) in detail. The effects of different molar ratio of catalyst on the first-order kinetic behavior were investigated. The experimental results showed that polymerization of styrene under the AIBN-α-bromo amide initiation system and CuBr₂/Me₆-TREN catalyst displayed the living/controlled nature. As the increase of molar ratio of catalyst, the polymerization was deviated from the first-order kinetic prematurely, and the initiating efficiency was enhanced. When polymerization was performed at 80℃ under the ratio value of [St]/[CuBr₂/Me₆-TREN]/[AIBN]/[ATP-Br]=200/0.3/0.05/0.5, both of the molecular weight of grafted and free PS were grown in a controlled manner with a lower PDI (<1.54), and the difference of them was increased with conversion increasing. When proceeded SR&NI ATRP with 31.1% monomer conversion, the initiating efficiency was calculated to be 6.3%, and about 1.4 g·g^-1 grafting ratio of hybrid particles was achieved. The thickness of grafted layer was attained to about 14 nm. Simultaneously, inhomogeneous distribution was observed, which resulted from the coupling termination between the surface-anchored and free active sites. The dispersion property of ATP@PS in PS matrix was improved obviously.

Key words: attapulgite, styrene, SR&NI ATRP, polymerization, synthesis, particles

中图分类号:

TQ316.32

张翱, 杨海存, 马文中, 李玉雪, 龚方红, 陶国良, 刘春林. 正反向同时引发ATRP制备凹凸棒土/聚苯乙烯杂化粒子[J]. 化工学报, 2018, 69(5): 2299-2308.

ZHANG Ao, YANG Haicun, MA Wenzhong, LI Yuxue, GONG Fanghong, TAO Guoliang, LIU Chunlin. Preparation of attapulgite/polystyrene hybrid particles via simultaneous reverse and normal initiation atom transfer radical polymerization[J]. CIESC Journal, 2018, 69(5): 2299-2308.

参考文献 32

[1]	ZHI C Y, BANDO Y, TANG C C, et al. Large-scale fabrication of boron nitride nanosheets and their utilization in polymeric composites with improved thermal and mechanical properties[J]. Adv. Mater., 2009, 21(28):2889-2893.
[2]	杨海存, 沈蕾, 刘惠, 等. 表面引发接枝聚合法制备凹凸棒土/聚甲基丙烯酸甲酯杂化粒子的研究[J]. 高分子学报, 2013, (8):978-984. YANG H C, SHEN L, LIU H, et al. Preparation of attapulgite/PMMA hybrid particles via surface-initiated graft polymerization[J]. Acta Polymerica Sinica, 2013, (8):978-984.
[3]	WEN J Y, WILKES G. Organic/inorganic hybrid network materials by the sol-gel approach[J]. Chem. Mater., 1996, 8(8):1667-1681.
[4]	PYUN J, MATYJASZEWSKI K. Synthesis of nanocomposite organic/inorganic hybrid materials using controlled/"living" radical polymerization[J]. Chem. Mater., 2001, 13(10):3436-3448.
[5]	OLIVIER A, MEYER F, RAQUEZ J M, et al. Surface-initiated controlled polymerization as a convenient method for designing functional polymer brushes:from self-assembled monolayers to patterned surfaces[J]. Prog. Polym. Sci., 2012, 37(1):157-181.
[6]	BADRI A, WHITTAKER M R, ZETTERLUND P B. Modification of graphene/graphene oxide with polymer brushes using controlled/living radical polymerization[J]. J. Polym. Sci. Pol. Chem., 2012, 50(15):2981-2992.
[7]	GARCÍA-VALDEZ O, LEDEZMA-RODRÍGUEZ R, SALDÍVAR-GUERRA E, et al. Graphene oxide modification with graft polymers via nitroxide mediated radical polymerization[J]. Polymer, 2014, 55(1):2347-2355.
[8]	ZDYRKO B, LUZINOV I. Polymer brushes by the "grafting to" method[J]. Macromol. Rapid. Comm., 2011, 32(12):859-869.
[9]	GOEL V, PIETRASIK J, DONG C H, et al. Structure of polymer tethered highly grafted nanoparticles[J]. Macromolecules, 2011, 44(20):8129-8135.
[10]	CHEN J C, LIU M Z, CHEN C, et al. Synthesis and characterization of silica nanoparticles with well-defined thermoresponsive PNIPAM via a combination of RAFT and click chemistry[J]. ACS Appl. Mater. Inter., 2011, 3(8):3215-3223.
[11]	WANG H D, ROEDER R D, WHITNEY R A, et al. Graft modification of crystalline nanocellulose by Cu(0)-mediated SET living radical polymerization[J]. J. Polym. Sci. Pol. Chem., 2015, 53(24):2800-2808.
[12]	SIEGWART D J, OH J K, MATYJASZEWSKI K. ATRP in the design of functional materials for biomedical applications[J]. Prog. Polym. Sci., 2012, 37(1):18-37.
[13]	LEE S H, DREYER D R, AN J, et al. Polymer brushes via controlled, surface-initiated atom transfer radical polymerization (ATRP) from graphene oxide[J]. Macromol. Rapid. Comm., 2010, 31(3):281-288.
[14]	ZHU J Y, GUO N N, ZHANG Y T, et al. Preparation and characterization of negatively charged PES nanofiltration membrane by blending with halloysite nanotubes grafted with poly(sodium 4-styrenesulfonate) via surface-initiated ATRP[J]. J. Membrane. Sci., 2014, 465:91-99.
[15]	RODDA A E, ERCOLE F, NISBET D R, et al. Optimization of aqueous SI-ATRP grafting of poly(oligo(ethylene glycol) methacrylate) brushes from benzyl chloride macroinitiator surfaces[J]. Macromol. Biosci., 2015, 15(6):799-811.
[16]	COAD B R, STYAN K E, MEAGHER L. One step ATRP initiator immobilization on surfaces leading to gradient-grafted polymer brushes[J]. ACS Appl. Mater. Inter., 2014, 6(10):7782-7789.
[17]	BRADLEY W F. The structural scheme of attapulgite[J]. Am. Mineral., 1940, 25(6):405-410.
[18]	黎珊, 戴红旗, 孔泳, 等. 凹凸棒土的应用研究进展[J]. 化工进展, 2013, 32(12):2934-2939. LI S, DAI H Q, KONG Y, et al. Research progress of attapulgite's application[J]. Chemical Industry and Engineering Progress, 2013, 32(12):2934-2939.
[19]	孟英芹, 赵晓兵, 李霞章. Sol-gel法制备CeO2-TiO2/凹凸棒石复合材料的催化性能[J]. 化工学报, 2013, 64(7):2679-2686. MENG Y Q, ZHAO X B, LI X Z. Catalytic properties of CeO2-TiO2/attapulgite nanocomposites prepared by sol-gel method[J]. CIESC Journal, 2013, 64(7):2679-2686.
[20]	吴洁, 丁师杰, 陈静, 等. 酸化凹凸棒石/海藻酸复合材料的制备及其缓释性能[J]. 化工学报, 2014, 65(11):4627-4632. WU J, DING S J, CHEN J, et al. Preparation and sustained release properties of acidified-attapulgite/alginate composite material[J]. CIESC Journal, 2014, 65(11):4627-4632.
[21]	LIU P, GUO J S. Polyacrylamide grafted attapulgite (PAM-ATP) via surface-initiated atom transfer radical polymerization (SI-ATRP) for removal of Hg (Ⅱ) ion and dyes[J]. Colloid. Surface. A, 2006, 282/283(20):498-503.
[22]	LIU P, WANG T M. Preparation of well-defined star polymer from hyperbranched macroinitiator based attapulgite by surface-initiated atom transfer radical polymerization technique[J]. Ind. Eng. Chem. Res., 2007, 46(1):97-102.
[23]	LEI Z Q, WEN S X. Synthesis and decoloration capacity of well-defined and PMMA-grafted palygorskite nanocomposites[J]. Eur. Polym. J., 2008, 44(9):2845-2849.
[24]	ZHANG H, YE W C, ZHOU F. Preparation of monodispersed and lipophilic attapulgite and polystyrene nanorods via surface-initiated atom transfer radical polymerization[J]. J. Appl. Polym. Sci., 2011, 122(5):2876-2883.
[25]	GROMADA J, MATYJASZEWSKI K. Simultaneous reverse and normal initiation in atom transfer radical polymerization[J]. Macromolecules, 2001, 34(22):7664-7671.
[26]	CIAMPOLINI B M, NARDI N. Trigonal bipyramidal complex of bivalent manganese, iron, and zinc with tris(2-dimethylaminoethyl)amine[J]. Inorg. Chem., 1966, 5(1):41-44.
[27]	KUMAR A, BANSAL A, BEHERA B, et al. Ternary hybrid polymeric nanocomposites through grafting of polystyrene on graphene oxide-TiO2 by surface initiated atom transfer radical polymerization (SI-ATRP)[J]. Mater. Chem. Phys., 2016, 172:189-196.
[28]	WANG W P, CAO H M, ZHU G J, et al. A facile strategy to modify TiO2 nanoparticles via surface-initiated ATRP of styrene[J]. J. Polym. Sci. Pol. Chem., 2010, 48(8):1782-1790.
[29]	WANG Y P, PEI X W, YUAN K. Reverse ATRP grafting from silica surface to prepare well-defined organic/inorganic hybrid nanocomposite[J]. Mater. Lett., 2005, 59(4):520-523.
[30]	MELO D M A, RUIZ J A C, MELO M A F, et al. Preparation and characterization of lanthanum palygorskite clays as acid catalysts[J]. J. Alloy. Compd., 2002, 344(1/2):352-355.
[31]	SAVE M, GRANVORKA G, BERNARD J, et al. Atom transfer radical polymerization of styrene and methyl methacrylate from mesoporous ordered silica particles[J]. Macromol. Rapid. Commun., 2006, 27(6):393-398.
[32]	GUO T Y, LIU P, ZHU J W, et al. Well-defined lactose-containing polymer grafted onto silica particles[J]. Biomacromolecules, 2006, 7(4):1196-1202.

正反向同时引发ATRP制备凹凸棒土/聚苯乙烯杂化粒子

Preparation of attapulgite/polystyrene hybrid particles via simultaneous reverse and normal initiation atom transfer radical polymerization

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献 32

相关文章 15

编辑推荐

Metrics

本文评价

[1]	王琪, 张斌, 张晓昕, 武虎建, 战海涛, 王涛. 氯铝酸-三乙胺离子液体/P₂O₅催化合成伊索克酸和2-乙基蒽醌[J]. 化工学报, 2023, 74(S1): 245-249.
[2]	杨菲菲, 赵世熙, 周维, 倪中海. Sn掺杂的In₂O₃催化CO₂选择性加氢制甲醇[J]. 化工学报, 2023, 74(8): 3366-3374.
[3]	仪显亨, 周骛, 蔡小舒, 蔡天意. 光纤后向动态光散射测量纳米颗粒的浓度适用范围研究[J]. 化工学报, 2023, 74(8): 3320-3328.
[4]	涂玉明, 邵高燕, 陈健杰, 刘凤, 田世超, 周智勇, 任钟旗. 钙基催化剂的设计合成及应用研究进展[J]. 化工学报, 2023, 74(7): 2717-2734.
[5]	李彬, 徐正虎, 姜爽, 张天永. 双氧水催化氧化法清洁高效合成促进剂CBS[J]. 化工学报, 2023, 74(7): 2919-2925.
[6]	葛加丽, 管图祥, 邱新民, 吴健, 沈丽明, 暴宁钟. 垂直多孔碳包覆的FeF₃正极的构筑及储锂性能研究[J]. 化工学报, 2023, 74(7): 3058-3067.
[7]	张澳, 罗英武. 低模量、高弹性、高剥离强度丙烯酸酯压敏胶[J]. 化工学报, 2023, 74(7): 3079-3092.
[8]	王杰, 丘晓琳, 赵烨, 刘鑫洋, 韩忠强, 许雍, 蒋文瀚. 聚电解质静电沉积改性PHBV抗氧化膜的制备与性能研究[J]. 化工学报, 2023, 74(7): 3068-3078.
[9]	刘杰, 吴立盛, 李锦锦, 罗正鸿, 周寅宁. 含乙烯基胺酯键聚醚类可逆交联聚合物的制备及性能研究[J]. 化工学报, 2023, 74(7): 3051-3057.
[10]	张谭, 刘光, 李晋平, 孙予罕. Ru基氮还原电催化剂性能调控策略[J]. 化工学报, 2023, 74(6): 2264-2280.
[11]	李勇, 高佳琦, 杜超, 赵亚丽, 李伯琼, 申倩倩, 贾虎生, 薛晋波. Ni@C@TiO₂核壳双重异质结的构筑及光热催化分解水产氢[J]. 化工学报, 2023, 74(6): 2458-2467.
[12]	龙臻, 王谨航, 任俊杰, 何勇, 周雪冰, 梁德青. 离子液体协同PVCap抑制天然气水合物生成实验研究[J]. 化工学报, 2023, 74(6): 2639-2646.
[13]	杨琴, 秦传鉴, 李明梓, 杨文晶, 赵卫杰, 刘虎. 用于柔性传感的双形状记忆MXene基水凝胶的制备及性能研究[J]. 化工学报, 2023, 74(6): 2699-2707.
[14]	陈韶云, 徐东, 陈龙, 张禹, 张远方, 尤庆亮, 胡成龙, 陈建. 单层聚苯胺微球阵列结构的制备及其吸附性能[J]. 化工学报, 2023, 74(5): 2228-2238.
[15]	王泽栋, 石至平, 刘丽艳. 考虑气泡非均匀耗散的矩形反应器声流场数值模拟及结构优化[J]. 化工学报, 2023, 74(5): 1965-1973.