双光子聚合3D打印

doi:10.11949/j.issn.0438-1157.20150754

摘要/Abstract

摘要：

3D打印是一种快速成型的增材制造技术。光固化立体印刷(SLA)是技术较成熟和应用较广的一种3D打印技术。SLA是采用紫外激光的单光子聚合过程,其加工分辨率受经典光学衍射极限的限制,难以满足分辨率高的微纳结构的加工。不同于SLA,利用近红外波长飞秒激光的双光子聚合3D打印技术可以突破经典光学衍射的限制,制造分辨率高的纳米尺度任意形状三维结构。本文将介绍双光子吸收和双光子聚合的原理、双光子聚合的发展和双光子聚合3D打印技术的应用,最后对该技术的发展进行展望。

关键词: 制造, 纳米技术, 聚合, 3D打印, 双光子

Abstract:

3D printing is a rapid prototyping technology based on an additive process. Stereolithography (SLA) as a mature 3D printing technology has been widely applied in industrial manufacture. SLA is the process of single-photon polymerization (SPP), and its resolution is controlled by the optical diffraction limit, which cannot meet the requirement for three dimensional micro/nanostructures with high resolution. Unlike SLA, 3D printing technology based on two-photon polymerization (TPP) induced by a near-infrared femtosecond laser can fabricate arbitrary and ultraprecise 3D microstructures with high resolution not only on the microscopic scale but also on the nanoscale. In this review, the principles of two-photon absorption and TPP were concisely explained. The development of TPP mainly focusing on TPP resolution and TPP initiators were introduced as well as the applications of 3D printing technology based on TPP. Finally, the perspective of 3D printing technology based on TPP was proposed.

Key words: manufacture, nanotechnology, polymerization, 3D printing, two-photon

中图分类号:

TB476

宋晓艳, 邢金峰. 双光子聚合3D打印[J]. 化工学报, 2015, 66(9): 3324-3332.

SONG Xiaoyan, XING Jinfeng. 3D printing technology based on two-photon polymerization[J]. CIESC Journal, 2015, 66(9): 3324-3332.

参考文献 46

[1]	Murphy S V, Atala A. 3D bioprinting of tissues and organs [J]. Nat. Biotechnol., 2014, 32(8): 773-785.
[2]	Campbell T A, Ivanova O S. 3D printing of multifunctional nanocomposites [J]. Nano Today, 2013, 8(2): 119-120.
[3]	Fischer J, Wegener M. Three-dimensional optical laser lithography beyond the diffraction limit [J]. Laser. Photonics. Rev., 2013, 7(1): 22-44.
[4]	Torgersen J, Qin X H, Li Z Q, Ovsianikov A, Liska R, Stampfl J. Hydrogels for two-photon polymerization: a toolbox for mimicking the extracellular matrix [J]. Adv. Funct. Mater., 2013, 23(36): 4542-4554.
[5]	Zeng H, Martella D, Wasylczyk P, Cerretti G, Lavocat J C, Ho C H, Parmeggiani C, Wiersma D S. High-resolution 3D direct laser writing for liquid-crystalline elastomer microstructures [J]. Adv. Mater., 2014, 26(15): 2319-2322.
[6]	Goppert-Mayer M. Uber elementarakte mit zwei quantensprungen [J]. Ann. Physik.. 1931, 9(1): 273-294.
[7]	Kaiser W, Garret C. Two-photon excitation in CaF2: Eu2+ [J]. Phys. Rev. Lett., 1961, 7(6): 229-231.
[8]	Rumi M, Perry J W. Two-photon absorption: an overview of measurements and principles [J]. Adv. Opt. Photon., 2010, 2(4): 451-518.
[9]	Pawlicki M, Collins H A, Denning R G, Anderson H L. Two-photon absorption and the design of two-photon dyes [J]. Angew. Chem. Int. Ed., 2009, 48(18): 3244-3266.
[10]	Fischer J, Wegener M. Three-dimensional optical laser lithography beyond the diffraction limit [J]. Laser. Photon. Rev., 2013, 7(1): 22-44.
[11]	Wang Tao(王涛), Shi Mengquan(施盟泉), Li Xue(李雪), Wu Feipeng(吴飞鹏). Progress of two-photon polymerization and its applications [J]. Photographic Science and Photochemistry(感光科学与光化学), 2003, 21(3): 223-230.
[12]	Dong Xianzi(董贤子), Chen Weiqiang(陈卫强), Zhao Zhensheng(赵振声), Duan Xuanming(段宣明). Fabrication and application of two-photon femtosecond laser micro/nano technology [J]. Chinese Science Bulletin(科学通报), 2008, 53(1): 2-13.
[13]	Zhang Y L, Chen Q D, Xia H, Sun H B. Designable 3D nanofabrication by femtosecond laser direct writing [J]. Nano Today, 2010, 5(5): 435-448.
[14]	Farsari M, Chichkov B N. Two-photon fabrication [J]. Nature. Photon., 2009, 3(8): 450-452.
[15]	Xing J F, Liu J H, Zhang T B, Zhang L, Zheng M L, Duan X M. A water soluble initiator prepared through host-guest chemical interaction for microfabrication of 3D hydrogels via two-photon polymerization [J]. J. Mater. Chem. B, 2014, 2(27): 4318-4324.
[16]	Maruo S, Nakamura O, Kawata S. Three-dimensional microfabrication with two-photon-absorbed photopolymerization [J]. Opt. Lett., 1997, 22(2): 132-134.
[17]	Kawata S, Sun H B, Tanaka T, Takada K. Finer features for functional microdevices [J]. Nature, 2001, 412(6848): 697-698.
[18]	Xing J F, Dong X Z, Chen W Q, Duan X M, Takeyasu N, Tanaka T, Kawata S. Improving spatial resolution of two-photon microfabrication by using photoinitiator with high initiating efficiency [J]. Appl. Phys. Lett., 2007, 90(13): 130016.
[19]	Takada K, Sun H B, Kawata S. Improved spatial resolution and surface roughness in photopolymerization-based laser nanowriting [J]. Appl. Phys. Lett., 2005, 86(7): 071122.
[20]	Dong X Z, Zhao Z S, Duan X M. Improving spatial resolution and reducing aspect ratio in multiphoton polymerization nanofabrication [J]. Appl. Phys. Lett., 2008, 92(2): 091113.
[21]	Tan D F, Li Y, Qi F J, Yang H, Gong Q H, Dong X Z, Duan X M. Reduction in feature size of two-photon polymerization using SCR500 [J]. Appl. Phys. Lett., 2007, 90(7): 71106.
[22]	Li L, Gattass R R, Gershgoren E, Hwang H, Fourkas J T. Achieving λ/20 resolution by one-color initiation and deactivation of polymerization [J]. Science, 2009, 324(5929): 910-913.
[23]	Schafer K J, Hales J M, Balu M, Belfield K D, van Stryland E W, Hagan D J. Two-photon absorption cross-sections of common photoinitiators [J]. J. Photochem. Photobiol., A, 2004, 162(2/3): 497-502.
[24]	Cumpston B H, Ananthavel S P, Barlow S, Dyer D L, Ehrlich J E, Erskine L L, Heikal A A, Kuebler S M, Lee I Y S, McCord-Maughon D, Qin J, Röckel H, Rumi M, Wu X L, Marder S R, Perry J W. Two-photon polymerization initiators for three dimensional optical data storage and microfabrication [J]. Nature, 1999, 398(6722): 51-54.
[25]	Albota M, Beljonne D, Brédas J L, Ehrlich J E, Fu J Y, Heikal A A, Hess S E, Kogej T, Levin M D, Marder S R, McCord-Maughon D, Perry J W, Röckel H, Rumi M, Subramaniam G, Webb W W, Wu X L, Xu C. Design of organic molecules with large two-photon absorption cross sections [J]. Science, 1998, 281(5383): 1653-1656.
[26]	Ren Y, Yu X Q, Zhang D J, Wang D, Zhang M L, Xu G B, Zhao X, Tian Y P, Shao Z S, Jiang M H. Synthesis, structure and properties of a new two-photon photopolymerization initiator [J]. J. Mater. Chem., 2002, 12(12): 3431-3437.
[27]	Yan Y, Tao X, Sun Y, Yu W, Wang C, Xu G, Yang J, Zhao X, Jiang M. Synthesis, structure and nonlinear optical properties of a two-photon photopolymerization initiator [J]. J. Mater. Sci., 2005, 40(3): 597-600.
[28]	Zhang X, Yu X, Sun Y, Xu H, Feng Y, Huang B, Tao X, Jiang M. Synthesis, structure and nonlinear optical properties of two new one and two-branch two-photon polymerization initiators [J]. Chem. Phys., 2006, 328(1/2/3): 103-110.
[29]	Zhang X, Yu X, Sun Y, He W, Wu Y, Feng Y, Tao X, Jiang M. Synthesis and nonlinear optical properties of two new two-photon initiators: triphenylamine derivatives [J]. Opt. Mater., 2006, 28(12): 1366-1371.
[30]	Xing J F, Chen W Q, Dong X Z, Tanaka T, Fang X Y, Duan X M, Kawata S. Synthesis, optical and initiating properties of new two-photon polymerization initiators-2,7-bis(styryl)anthraquinone derivatives [J]. J. Photochem. Photobiol. A, 2007, 189(2/3): 398-404.
[31]	Xing J F, Chen WQ, Gu J, Dong X Z, Takeyasu N, Tanaka T, Duan X M, Kawata S. Design of high efficiency for two-photon polymerization initiator: combination of radical stabilization and large two-photon cross-section achieved by N-benzyl 3,6-bis(phenylethynyl)carbazole derivatives [J]. J. Mater. Chem., 2007, 17(14): 1433-1438.
[32]	Xing J F, Zheng M L, Chen W Q, Dong X Z, Takeyasu N, Tanaka T, Zhao Z S, Duan X M, Kawata S. C2v symmetrical two-photon polymerization initiators with anthracene core: synthesis, optical and initiating properties [J]. Phys. Chem. Chem. Phys., 2012, 14(45): 15785-15792.
[33]	Li Z, Pucher N, Cicha K, Torgersen J, Ligon S C, Ajami A, Husinsky W, Rosspeintner A, Vauthey E, Naumov S, Scherzer T, Stampfl J, Liska R. A straightforward synthesis and structure-activity relationship of highly efficient initiators for two-photon polymerization [J]. Macromolecules, 2013, 46(2): 352-361.
[34]	Xing J F, Zheng M L, Duan X M. Two-photon polymerization microfabrication of hydrogels: an advanced 3D printing technology for tissue engineering and drug delivery [J]. Chem. Soc. Rev., 2015, DOI: 10.1039/c5cs00278h.
[35]	Ciuciu A I, Cywiński P J. Two-photon polymerization of hydrogels-versatile solutions to fabricate well-defined 3D structures [J]. RSC Adv., 2014, 4(85): 45504-45516.
[36]	Sun H B, Matsuo S, Misawa H. Three-dimensional photonic crystal structures achieved with two-photon-absorption photopolymeri-zation of resin [J]. Appl. Phys. Lett., 1999, 74(6): 786-788.
[37]	Serbin J, Gu M. Experimental evidence for superprism effects in three-dimensional polymer photonic crystals [J]. Adv. Mater., 2006, 18(2): 221-224.
[38]	Guo R, Li Z Y, Jiang Z W. Log-pile photonic crystal fabricated by two-photon photopolymerization [J]. J. Optics. A-Pure. Appl. Optics., 2005, 7(8): 396-399.
[39]	Rybin M V, Shishkin I I, Samusev K B, Belov P A, Kivshar Y S, Kiyan R V, Chichkov B N, Limonov M F. Band structure of photonic crystals fabricated by two-photon polymerization [J]. Crystals, 2015, 5(1): 61-73.
[40]	Galajda P, Ormos P. Complex micromachines produced and driven by light [J]. Appl. Phys. Lett., 2001, 78(2): 249-251.
[41]	Maruo S, Ikuta K, Korogi H. Submicron manipulation tools driven by light in a liquid [J]. Appl. Phys. Lett., 2003, 82(1): 133-135.
[42]	Maruo S, Inoue H. Optically driven micropump produced by three-dimensional two-photon microfabrication [J]. Appl. Phys. Lett., 2006, 89(14): 44101.
[43]	Xia H, Wang J A, Tian Y, Chen Q D, Du X B, Zhang Y L, He Y, Sun H B. Ferrofluids for fabrication of remotely controllable micro-nanomachines by two-photon polymerization [J]. Adv. Mater., 2010, 22(29): 3204-3207.
[44]	Marino A, Filippeschi C, Mattoli V, Mazzolaia B, Ciofani G. Biomimicry at the nanoscale: current research and perspectives of two-photon polymerization [J]. Nanoscale, 2015, 7(7): 2841-2850.
[45]	Marino A, Filippeschi C, Genchi G G, Mattoli V, Mazzolai B, Ciofani G. The osteoprint: a bioinspired two-photon polymerized 3-D structure for the enhancement of bone-like cell differentiation [J]. Acta. Biomater., 2014, 10(10): 4304-4313.
[46]	Raimondi M T, Eaton S M, Lagana M, Aprile V, Nava M M, Cerullo G, Osellame R. Three-dimensional structural niches engineered via two-photon laser polymerization promote stem cell homing [J]. Acta. Biomater., 2013, 9(1): 4579-4584.