CIESC Journal ›› 2015, Vol. 66 ›› Issue (12): 4941-4947.DOI: 10.11949/j.issn.0438-1157.20151375

Previous Articles     Next Articles

Modeling, simulation and analysis for coal and coke-oven gas to synthetic natural gas

MAN Yi, YANG Siyu, XIAO Honghua, QIAN Yu   

  1. School of Chemistry and Chemical Engineering, South China University of Technology, Guangzhou 510640, Guangdong, China
  • Received:2015-08-31 Revised:2015-09-30 Online:2015-12-05 Published:2015-12-05
  • Supported by:

    supported by the National Natural Science Foundation of China(21136003, 21306056).

煤和焦炉气联供制合成天然气过程的建模、模拟与分析

满奕, 杨思宇, 萧鸿华, 钱宇   

  1. 华南理工大学 化学与化工学院, 广东 广州 510640
  • 通讯作者: 钱宇
  • 基金资助:

    国家自然科学基金项目(21136003,21306056)。

Abstract:

Coal to synthetic natural gas (SNG) process is regarded as one of promising way to tackle with haze in north China and is developed rapidly in China. However, coal to SNG processes suffer from the high energy consumption and CO2 emission due to the high carbon contents of coal. In China, there is 7×1010 m3 coke-oven gas (COG) produced in coke plants annually. Most of the hydrogen-rich COG is utilized as fuel or discharged directly into the air. Such situation is a waste of precious hydrogen resource and causes serious economic loss and environmental pollution either. The co-feed process of coal and COG to SNG is a promising solution for these problems. In the co-feed process, CH4 of COG reacts with CO2 in a dry methane reforming unit to reduce emissions and H2 of COG can adjust the H/C ratio of syngas. This paper makes a modeling, simulation and system analysis for the co-feed process of coal and COG to SNG. The results show that the energy efficiency of the co-feed process increases by 8%, while at the same time, CO2 emission is reduced by 60% in comparison to the conventional coal to SNG process.

Key words: computer simulation, syngas, systems engineering, coke-oven gas, natural gas

摘要:

近年来中国的煤制天然气项目快速发展。然而煤制天然气项目的CO2排放量大、污水产量高难处理,生产过程能效低。与此同时,中国焦炭工业每年产生约700亿立方米的副产物焦炉气,这些富氢的焦炉气大多被燃烧或直接排放进入大气,对环境造成严重影响,同时还浪费了巨大的经济价值。煤和焦炉气联供制天然气新工艺可有效解决这些问题。焦炉气与煤元素互补,焦炉气中的氢气可用来调节合成气的氢碳比;甲烷可通过甲烷干重整过程降低煤制烯烃过程排放的CO2,提高碳元素利用率,实现节能减排。本文针对煤和焦炉气联供制天然气这个新的工艺过程进行建模、模拟与分析,发现新过程的能效比煤天然气烃过程提高了约8个百分点,而CO2排放量则减少了约60%。

关键词: 计算机模拟, 合成气, 系统工程, 焦炉气, 天然气

CLC Number: