CIESC Journal ›› 2016, Vol. 67 ›› Issue (5): 1725-1731.DOI: 10.11949/j.issn.0438-1157.20151663

Previous Articles     Next Articles

Simulation of flow-reaction process in fluidized bed gasifier considering particle rotational motion

WANG Zhiyu1, HAO Zhenhua1, DONG Libo1, LI Junguo1, LU Huilin2   

  1. 1 Institute of Coal Chemistry, Chinese Academy of Sciences, Taiyuan 030001, Shanxi, China;
    2 School of Energy Science and Engineering, Harbin Institute of Technology, Harbin 150001, Heilongjiang, China
  • Received:2015-11-04 Revised:2015-12-29 Online:2016-05-05 Published:2016-05-05
  • Supported by:

    supported by the National Natural Science Foundation of China(21506242) and the Shanxi Province Science Foundation for Youths (2014021014-7).

考虑颗粒旋转的流化床流动和气化反应模拟

王志宇1, 郝振华1, 董立波1, 李俊国1, 陆慧林2   

  1. 1 中国科学院山西煤炭化学研究所, 山西 太原 030001;
    2 哈尔滨工业大学能源科学与工程学院, 黑龙江 哈尔滨 150001
  • 通讯作者: 郝振华
  • 基金资助:

    国家自然科学基金项目(21506242);山西省青年科学基金项目(2014021014-7)。

Abstract:

Abandoning the pure smooth assumption of particles in classical kinetic theory of granular flow, this work established a kinetic theory model for rough granular and provided relevant constitutive correlations with approximate solutions by considering both opposite and tangential components force of the rough granular. Combined with the gasification model of coal powders, the flow-reaction process of coal powders was simulated in a bubbling fluidized bed and the time-average velocity and particle concentration distributions with rough granular were obtained in the bed. The simulated fluctuating energy and heterogeneity of rough granular in the fluidized bed increased compared with the simulated results of the smooth particles. The concentration of gas components obtained in the simulation agreed well with the experimental data in the literature.

Key words: fluidized bed, kinetic modeling, particle collision, particle rotation, numerical simulation

摘要:

摒弃传统颗粒动力学模型中颗粒绝对光滑的假设,以粗糙颗粒为研究对象,同时考虑颗粒碰撞过程中的对心和切向分力建立了粗糙颗粒动力学模型,采用近似求解给出了相关本构关系式。结合粉煤气化反应模型模拟研究了鼓泡流化床内粉煤颗粒的流动-反应过程,获得了床内粗糙颗粒时均速度和浓度的径向分布。与光滑颗粒的计算结果相比,粗糙颗粒的脉动能量增大,床内不均匀特性进一步增强。同时得到的各气体组分的浓度分布与他人的实验结果相吻合。

关键词: 流化床, 动力学模型, 颗粒碰撞, 颗粒旋转, 数值模拟

CLC Number: