CIESC Journal ›› 2013, Vol. 64 ›› Issue (2): 663-670.DOI: 10.3969/j.issn.0438-1157.2013.02.034

Previous Articles     Next Articles

Surface modification of polypropylene microporous membrane via self-assembly and UV-crosslinking of lecithin and analysis of surface properties

WANG Liang1,2, YU Haiyin1, HE Guijin2, HUANG Xiaojun2   

  1. 1. School of Chemistry and Materials Science, Anhui Normal University, Wuhu 241000, Anhui, China;
    2. State Key Laboratory of Chemical Engineering, Key Laboratory of Macromolecular Synthesis and Functionalization (MOE), Department of Polymer Science and Engineering, Zhejiang University, Hangzhou 310027, Zhejiang, China
  • Received:2012-07-25 Revised:2012-10-16 Online:2013-02-05 Published:2013-02-05
  • Supported by:

    supported by the State Key Laboratory of Chemical Engineering(SKL-ChE-10D02) and Zhejiang Provincial Top Key Discipline of New Materials and Process Engineering(20110915).

聚丙烯膜表面磷脂自组装/交联改性及其表面性能

王亮1,2, 宇海银1, 何桂金2, 黄小军2   

  1. 1. 安徽师范大学化学与材料科学学院,安徽 芜湖 241000;
    2. 浙江大学高分子科学与工程学系, 化学工程联合国家重点实验室,高分子合成与功能构造教育部重点实验室,浙江 杭州 310027
  • 通讯作者: 黄小军
  • 作者简介:王亮(1986—),男,硕士研究生。
  • 基金资助:

    化学工程联合国家重点实验室开放课题项目(SKL-ChE-10D02);浙江省新材料及加工工程省重中之重学科开放课题项目(20110915)。

Abstract: A novel approach to modification of polypropylene microporous membrane (PPMM) surface based on molecular self-assembly and UV-crosslinking was devised.First, natural amphiphilic lecithin was introduced onto the PPMM surface via self-assembly.Then, a stable biomimetic surface analogy with phospholipid layer was constructed through UV-crosslinking of lecithin, conferring the PPMM surface with good hydrophilicity and biocompatibility.The anchoring of lecithin was confirmed by Fourier transformed infrared spectroscopy/attenuated total reflection(FTIR/ATR)and X-ray photoelectron spectroscopy (XPS) studies.Water contact angle, fluorescence labeled protein(FITC-protein)adsorption, and enzyme-linked immuno-sorbent assay (ELISA) were used to evaluate hydrophilicity and biocompatibility of the membrane.Water contact angle of the PPMMs surface was significantly improved after modification, by a decrease from 130? to 30?.Moreover, the modified membranes showed lower protein adsorption.Furthermore, the self-assembly and UV-crosslinking modified membrane exhibited good stability even after multiple washing compared with the self-assembly modified one.

Key words: polypropylene microporous membrane, lecithin, self-assembly, UV-crosslinking, biocompatibility

摘要: 发展了一种基于分子自组装/交联的聚丙烯微孔膜(PPMM)表面改性方法,以含不饱和长烷基链的两亲性天然卵磷脂为改性剂,首先通过分子自组装在PPMM表面形成类磷脂组装层,再采用紫外线原位聚合交联方法在PPMM表面构建稳定的类磷脂仿生修饰层,进而赋予PPMM表面优异的亲水性和生物相容性。分别采用FTIR/ATR和XPS分析确证了改性前后膜表面基团及化学成分的变化。通过水接触角测定、荧光标记蛋白质吸附和酶联免疫吸附(ELISA)实验,考察了类磷脂仿生修饰前后膜表面亲水性和抗蛋白质吸附性能,发现类磷脂仿生修饰后PPMM表面水接触角由130°下降至30°,抗蛋白质吸附性能也得到明显改善;自组装/交联改性PPMM经多次水洗后仍能保持良好的亲水性和抗蛋白质吸附性能,表明膜表面所形成的类磷脂仿生修饰层具有良好的稳定性。

关键词: 聚丙烯微孔膜, 卵磷脂, 自组装, 紫外交联, 生物相容性

CLC Number: