CIESC Journal ›› 2014, Vol. 65 ›› Issue (1): 328-336.DOI: 10.3969/j.issn.0438-1157.2014.01.043

Previous Articles     Next Articles

Mixed-amine functionalized SBA-15 for CO2 adsorption

JING Yu1, WEI Li1,2, WANG Yundong1, YU Yanmei1   

  1. 1 Department of Chemical Engineering, State Key Laboratory of Chemical Engineering, Tsinghua University, Beijing 100084, China;
    2 School of Chemical Engineering, Beijing University of Chemical Technology, Beijing 100029, China
  • Received:2013-06-30 Revised:2013-09-24 Online:2014-01-05 Published:2014-01-05
  • Supported by:

    supported by the National Natural Science Foundation of China (20836008, 21176132).

混合胺改性SBA-15的二氧化碳吸附特性

靖宇1, 韦力1,2, 王运东1, 于燕梅1   

  1. 1 清华大学化学工程系, 化学工程联合国家重点实验室, 北京 100084;
    2 北京化工大学化学工程学院, 北京 100029
  • 通讯作者: 王运东
  • 作者简介:靖宇(1987-),男,博士研究生。
  • 基金资助:

    国家自然科学基金项目(20836008,21176132)。

Abstract: To achieve an economical and effective approach of CO2 capture, design of novel adsorbents for post-combustion CO2 adsorption has important significance. To improve CO2 adsorption capacity, two methods of wet impregnation and surface grafting have been used recently. "Mixed-amine" concept was proposed and these two methods were combined in this paper. 3-Aminopropyltrimethoxysilane (APTS) was first grafted onto the surface of SBA-15 and then polyethylenimine (PEI) was impregnated into the space of pores. This novel adsorbent possessed a very high density of amine groups. The structural property, CO2 adsorption capacity and amine efficiency of mixed-amine functionalized SBA-15 with different ratios of APTS and PEI were investigated. The CO2 adsorption result showed that the performance of mixed-amine functionalized SBA-15 depended on kinetic diffusion. SBA-15-(APTS-0.5-PEI-50), SBA-15-(APTS-1.0-PEI-50) and SBA-15-(APTS-2.0-PEI-30) could be identified as potential adsorbents at 75℃. The amine efficiency of mixed-amine functionalized SBA-15 was between purely impregnated and grafted ones.

Key words: CO2 capture, adsorption, adsorbent, mesoporous material, amine functionalized material

摘要: 为实现廉价高效的二氧化碳捕集,新型燃烧后CO2捕集固体吸附材料的设计和开发具有重要的研究意义。为提高CO2吸附量,胺功能化改性吸附剂的方法主要有湿浸渍和表面嫁接。基于此,提出了“混合胺”修饰的概念,把湿浸渍和表面嫁接两种改性技术结合起来。把3-氨丙基三甲氧基硅烷(APTS)嫁接到分子筛SBA-15孔道表面,再把聚乙烯亚胺(PEI)浸渍到载体孔道的间隙,制备出高密度胺功能化的CO2吸附剂。主要考察了不同含量的PEI和APTS功能化SBA-15的结构性能、CO2吸附量及胺吸附效率。CO2吸附结果表明,混合胺功能化SBA-15吸附主要依赖于动力学扩散。其中,SBA-15-(APTS-0.5-PEI-50),SBA-15-(APTS-1.0-PEI-50)和SBA-15-(APTS-2.0-PEI-30)在75℃时具有很好的吸附潜力。混合胺功能化SBA-15的胺吸附效率介于单纯嫁接和单纯浸渍的胺功能化SBA-15之间。

关键词: 二氧化碳捕集, 吸附, 吸附剂, 介孔材料, 胺功能化材料

CLC Number: