[1] Tilly, G. P., "Erosion caused by impact of solid particles",Treatise on Materials Science and Technology, 13 (2), 287(1979). [2] Fan, J. R., Zhou, D. D., Zeng, K. L., Cen, K. F., "Numerical and experimental study of finned tube erosion protection methods", Wear, 152 (1), 1 (1992). [3] Song, X. Q., Lin, J. Z., Zhao, J. F., Shen, T. Y., "Research on reducing erosion by adding ribs on the wall in particulate two-phase flows", Wear, 193 (1), 1 (1996). [4] Yao, J., Zhang, B. Z., Fan, J. R., "An experimental investigation of a new method for protecting bends from erosion in gas-solid flows", Wear, 240 (2), 215 (2000). [5] Yao, J., Zhang, B. Z., Shen, X. R., "Numerical investigation on flow characteristics in ribbed bend", J. of Hydrodynamics, 12 (3), 47 (2000). [6] Launder, B. E., Spalding, D. B., "The numerical computation of turbulent flows", Comp. Meth. Appl. Mech. and Eng., 3 (3), 269 (1974). [7] Crowe, C. T., Sharma, M. P., Stock, D. E., "The Particlesource-in-cell (PSI-cell) model for gas-droplet flows", J. of Fluids Engng., 99 (2), 325 (1977). [8] Zhang, X. Y., Chen, L. H., Fan, J. R., Cen, K. F., "Prediction of turbulient flow characteristics in the curved duct with a baffle", J. ofHydrodynamics, 9 (4), 19 (1997). [9] Patankar, S. V., Numerical Heat Transfer and Fluid Flow,McGraw-Hill, New York (1980). [10] Sommerfeld, M., Zivkovic, G., "Recent advances in the numerical simulation of pneumatic conveying through tube systems", In: Computational Methods in Applied Sciences,Ch. Hirsch, ed., Elsevier Science Publishers B. V., 201(1992). [11] Grant, G., Tabakoff, W., "Erosion prediction in turbomachinery resulting from environ -mental solid particles", J. of Aircraft, 12 (5), 471 (1975). [12] Tabakoff, W., Kotwal, R., Hamed, A., "Erosion study of different materials affected by coal ash particles", Wear, 52(1), 161 (1979). [13] Mason, J. S., Smith, B. V., "The erosion of bends by pneumatically conveyed suspension of abrasive particles", Powder Technology, 6 (6), 323 (1972). [14] Finnie, I., "Erosion of surfaces by solid particles", Wear, 3(1), 87 (1960). [15] Tilly, G. P., "Erosion caused by ariborne particles", Wear,14 (1), 63 (1969). [16] Cousen, A. K., Hutchings, I. M., "A critical study of the erosion of an aluminum alloy by solid spherical particles at normal impingement", Proc. 6th Int. Conf. on Erosion by Liquid and Solid Impact, 41 (1983). |