CIESC Journal ›› 2019, Vol. 70 ›› Issue (7): 2503-2511.DOI: 10.11949/0438-1157.20190171
• Fluid dynamics and transport phenomena • Previous Articles Next Articles
Ming HUANG1,2(),Junyang KANG1,Xinzhe WU1,Xianzhang SHI1(),Yongzhi LIU1,Wei CAO1,Chuntai LIU1
Received:
2019-03-01
Revised:
2019-04-29
Online:
2019-07-05
Published:
2019-07-05
Contact:
Xianzhang SHI
黄明1,2(),康俊阳1,吴昕哲1,石宪章1(),刘永志1,曹伟1,刘春太1
通讯作者:
石宪章
作者简介:
黄明(1978—),男,博士,副教授,<email>huangming@zzu.edu.cn</email>
基金资助:
CLC Number:
Ming HUANG, Junyang KANG, Xinzhe WU, Xianzhang SHI, Yongzhi LIU, Wei CAO, Chuntai LIU. Layered simulation in thickness direction and experimental study on refractive index of injection molded optical products[J]. CIESC Journal, 2019, 70(7): 2503-2511.
黄明, 康俊阳, 吴昕哲, 石宪章, 刘永志, 曹伟, 刘春太. 注塑成型光学制品折射率分层模拟与实验研究[J]. 化工学报, 2019, 70(7): 2503-2511.
Density/(kg·m-3) | Thermal conductivity /(W·m-1·K-1) | Specific heat /(J·kg-1·K-1) | Transition temperature/K |
---|---|---|---|
1045.6 | 0.23 | 1881 | 417 |
Table 1 PC performance parameters
Density/(kg·m-3) | Thermal conductivity /(W·m-1·K-1) | Specific heat /(J·kg-1·K-1) | Transition temperature/K |
---|---|---|---|
1045.6 | 0.23 | 1881 | 417 |
Distance from injection gate/mm | Brewster angle/(°) | Measured value | Simulated value |
---|---|---|---|
10 | 58.05 | 1.6034 | 1.6000 |
25 | 57.89 | 1.5935 | 1.5914 |
40 | 57.97 | 1.5985 | 1.5903 |
55 | 57.97 | 1.5985 | 1.5890 |
70 | 58.11 | 1.6072 | 1.5953 |
Table 2 Comparison of measured refractive index with simulated values
Distance from injection gate/mm | Brewster angle/(°) | Measured value | Simulated value |
---|---|---|---|
10 | 58.05 | 1.6034 | 1.6000 |
25 | 57.89 | 1.5935 | 1.5914 |
40 | 57.97 | 1.5985 | 1.5903 |
55 | 57.97 | 1.5985 | 1.5890 |
70 | 58.11 | 1.6072 | 1.5953 |
1 | YiA Y, TaoB, KlockeF, et al. Residual stresses in glass after molding and its influence on optical properties[J]. Procedia Engineering, 2011, 19(1): 402-406. |
2 | 朱勤勤, 封麟先. 光学用透明高分子材料[J]. 高分子材料科学与工程, 1995, (5): 1-6. |
ZhuQ Q, FengL X. Optical transparent polymer materials[J]. Polymer Materials Science and Engineering, 1995, (5): 1-6. | |
3 | 官建国, 袁润章. 光学透明材料的现状和研究进展(Ⅰ):光学透明高分子材料[J]. 武汉工业大学学报, 1998, (2): 11-13. |
GuanJ G, YuanR Z. The present situation and development of optically transparent materials (I): Optically transparent polymers[J]. Journal of Wuhan University of Technology, 1998, (2): 11-13. | |
4 | MichaeliW, KlaiberF, ForsterJ. Geometrical accuracy and optical performance of injection moulded and injection-compression moulded plastic parts[J]. Manufacturing Technology, 2007, 56(1): 545-548. |
5 | JhaG S, SeshadriG, MohanA, et al. Development of high refractive index plastics[J]. Polymers, 2007, 7: 1384-1408. |
6 | Pina-EstanyJ, García-GranadabA A, Corull-MassanaaE. Injection moulding of plastic parts with laser textured surfaces with optical applications[J]. Optical Materials, 2018, 79:372-380. |
7 | YanagishitaT, MasuiM, IkegawaN, et al. Fabrication of polymer antireflection structures by injection molding using ordered anodic porous alumina mold[J]. Journal of Vacuum Science & Technology B, 2014, 32(2): 021809-021809-5. |
8 | WangC F, HuangM, ShenC Y, et al. Warpage prediction of the injection-molded strip-like plastic parts[J]. Chinese Journal of Chemical Engineering, 2016, 24(5): 665-670. |
9 | SpinaR, WalachP, SchildJ, et al. Analysis of lens manufacturing with injection molding[J]. International Journal of Precision Engineering & Manufacturing, 2012, 13(11): 2087-2095. |
10 | HuangC. Investigation of injection molding process for high precision polymer lens manufacturing[D]. Ohio: The Ohio State University, 2008. |
11 | AfzalM A F, HachmannJ. Benchmarking DFT approaches for the calculation of polarizability inputs for refractive index predictions in organic polymers[J]. Physical Chemistry Chemical Physics, 2019, 21(8): 4452-4460. |
12 | AfzalM A F, ChengC, HachmannJ. Combining first-principles and data modeling for the accurate prediction of the refractive index of organic polymers[J]. Journal of Chemical Physics, 2018, 148(24): 241712-241712-8. |
13 | 李海梅, 姜坤, 徐文莉, 等. 工艺条件对透明光学制品性能的影响[J]. 中国机械工程, 2006, (S1): 157-160. |
LiH M, JiangK, XuW L, et al. Effects of process parameters on optical properties of injection molded parts[J]. China Mechanical Engineering, 2006, (S1): 157-160. | |
14 | 王鑫, 李海梅, 杜林芳. 模具结构和熔体温度对PC透明制品性能的影响[J]. 工程塑料应用, 2008, 36(1): 27-30. |
WangX, LiH M, DuL F. Influence of mold structure and melt temperature on performance of PC transparent injection molded parts[J]. Engineering Plastics Application, 2008, 36(1): 27-30. | |
15 | 曹国荣, 王克俭. 注塑工艺对聚碳酸酯曲面透光件光学角偏差的影响[J]. 中国塑料, 2015, 29(11): 87-91. |
CaoG R, WangK J. Effect of injection molding process on angular deviation of curved transparent polycarbonate parts[J]. China Plastics, 2015, 29(11): 87-91. | |
16 | 陈宇宏, 袁渊, 张宜生, 等. 基于光学畸变要求的注射成型透明平板应力翘曲分析[J]. 航空材料学报, 2008, 28(6): 82-87. |
ChenY H, YuanY, ZhangY S, et al. Residual stresses, warpage and shrinkage analysis of injection molded transparent panel based on optical distortion[J]. Journal of Aeronautical Materials, 2008, 28(6): 82-87. | |
17 | AvraamI I, Tsui-HsunL. Frozen-in birefringence and anisotropic shrinkage in optical moldings(Ⅰ): Theory and simulation scheme[J]. Polymer, 2010, 51(1): 316-327. |
18 | AvraamI I, Tsui-HsunL, KeehaeK. Frozen-in birefringence and anisotropic shrinkage in optical moldings(Ⅱ): Comparison of simulations with experiments on light-guide plates[J]. Polymer, 2010, 51(23): 5623-5639. |
19 | YangS S, TaiH K. A study of birefringence, residual stress and final shrinkage for precision injection molded parts[J]. Korea-Australia Rheology Journal, 2007, 19(4): 191-199. |
20 | ParkK, JooW. Numerical evaluation of a plastic lens by coupling injection molding analysis with optical simulation[J]. Japanese Journal of Applied Physics, 2008, 47(11): 8402-8407. |
21 | YangC, SuL J, HuangC N, et al. Effect of packing pressure on refractive index variation in injection molding of precision plastic optical lens[J]. Advances in Polymer Technology, 2011, 30(1): 51-61. |
22 | BensinghR J, MachavaramR, BoopathyS R, et al. Injection molding process optimization of a bi-aspheric lens using hybrid artificial neural networks (ANNs) and particle swarm optimization (PSO) [J]. Measurement, 2019, 134: 359-374. |
23 | LiL, RaaschT W, YiA Y. Simulation and measurement of optical aberrations of injection molded progressive addition lenses[J]. Applied Optics, 2013, 52(24): 6022-6029. |
24 | AdhikariA, BourgadeT, AsundiA. Residual stress measurement for injection molded components[J]. Theoretical and Applied Mechanics Letters, 2016, 6(4): 152-156. |
25 | 李金仓. 注射成型聚碳酸酯制品透光性能模拟与实验研究[D]. 河南: 郑州大学, 2016. |
LiJ C. Simulation and experimental study on light transmittance of injection molded polycarbonate products[D]. Henan: Zhengzhou University, 2016. | |
26 | 黄明, 石宪章, 刘春太, 等. 基于统一网格的塑件成型与模具结构一体化分析[J]. 化工学报, 2012, 63(8): 2617-2622. |
HuangM, ShiX Z, LiuC T, et al. Integrated analysis of part molding and mold structural mechanics based on identical mesh[J]. CIESC Journal, 2012, 63(8): 2617-2622. | |
27 | 王超房, 黄明, 石宪章, 等. 注塑成型Hele-Shaw流动模拟中热对流的异步长求解[J]. 化工学报, 2016, 67(7): 3047-3054. |
WangC F, HuangM, ShiX Z, et al. Thermal convection calculation with variable time step in Hele-Shaw flow simulation of injection molding[J]. CIESC Journal, 2016, 67(7): 3047-3054. | |
28 | ChiangH H, HieberC A, WangK K. A unified simulation of the filling and postfilling stages in injection molding(I): Formulation[J]. Polymer Engineering & Science, 1991, 31(2): 116-124. |
29 | KrishnaswamyR K, JanzenJ. Exploiting refractometry to estimate the density of polyethylene: the Lorentz–Lorenz approach re-visited[J]. Polymer Testing, 2005, 24(6): 762-765. |
30 | 陈方平, 祁铮. Brewster角的测量方法[J]. 物理实验, 2012, 32(11): 41-43. |
ChenF P, QiZ. Measurement method of Brewster angle[J]. Physics Experimentation, 2012, 32(11): 41-43. | |
31 | 王中林. 基于Brewster定律的分光仪测量玻璃折射率实验[J]. 大学物理实验, 2012, 25(3): 55-57. |
WangZ L. Spectrometer measuring the refractive index of glass experiment based on Brewster s law[J]. Physical Experiment of College, 2012, 25(3): 55-57. |
[1] | Zhanyu YE, He SHAN, Zhenyuan XU. Performance simulation of paper folding-like evaporator for solar evaporation systems [J]. CIESC Journal, 2023, 74(S1): 132-140. |
[2] | Yifei ZHANG, Fangchen LIU, Shuangxing ZHANG, Wenjing DU. Performance analysis of printed circuit heat exchanger for supercritical carbon dioxide [J]. CIESC Journal, 2023, 74(S1): 183-190. |
[3] | Zhiguo WANG, Meng XUE, Yushuang DONG, Tianzhen ZHANG, Xiaokai QIN, Qiang HAN. Numerical simulation and analysis of geothermal rock mass heat flow coupling based on fracture roughness characterization method [J]. CIESC Journal, 2023, 74(S1): 223-234. |
[4] | Jiahao SONG, Wen WANG. Study on coupling operation characteristics of Stirling engine and high temperature heat pipe [J]. CIESC Journal, 2023, 74(S1): 287-294. |
[5] | Siyu ZHANG, Yonggao YIN, Pengqi JIA, Wei YE. Study on seasonal thermal energy storage characteristics of double U-shaped buried pipe group [J]. CIESC Journal, 2023, 74(S1): 295-301. |
[6] | Song HE, Qiaomai LIU, Guangshuo XIE, Simin WANG, Juan XIAO. Two-phase flow simulation and surrogate-assisted optimization of gas film drag reduction in high-concentration coal-water slurry pipeline [J]. CIESC Journal, 2023, 74(9): 3766-3774. |
[7] | Lei XING, Chunyu MIAO, Minghu JIANG, Lixin ZHAO, Xinya LI. Optimal design and performance analysis of downhole micro gas-liquid hydrocyclone [J]. CIESC Journal, 2023, 74(8): 3394-3406. |
[8] | Gang YIN, Yihui LI, Fei HE, Wenqi CAO, Min WANG, Feiya YAN, Yu XIANG, Jian LU, Bin LUO, Runting LU. Early warning method of aluminum reduction cell leakage accident based on KPCA and SVM [J]. CIESC Journal, 2023, 74(8): 3419-3428. |
[9] | Xiaosong CHENG, Yonggao YIN, Chunwen CHE. Performance comparison of different working pairs on a liquid desiccant dehumidification system with vacuum regeneration [J]. CIESC Journal, 2023, 74(8): 3494-3501. |
[10] | Wenzhu LIU, Heming YUN, Baoxue WANG, Mingzhe HU, Chonglong ZHONG. Research on topology optimization of microchannel based on field synergy and entransy dissipation [J]. CIESC Journal, 2023, 74(8): 3329-3341. |
[11] | Rui HONG, Baoqiang YUAN, Wenjing DU. Analysis on mechanism of heat transfer deterioration of supercritical carbon dioxide in vertical upward tube [J]. CIESC Journal, 2023, 74(8): 3309-3319. |
[12] | Chen HAN, Youmin SITU, Bin ZHU, Jianliang XU, Xiaolei GUO, Haifeng LIU. Study of reaction and flow characteristics in multi-nozzle pulverized coal gasifier with co-processing of wastewater [J]. CIESC Journal, 2023, 74(8): 3266-3278. |
[13] | Linqi YAN, Zhenlei WANG. Multi-step predictive soft sensor modeling based on STA-BiLSTM-LightGBM combined model [J]. CIESC Journal, 2023, 74(8): 3407-3418. |
[14] | Kexin HUANG, Tong LI, Anqi LI, Mei LIN. Mode decomposition of flow field in T-junction with rotating impeller [J]. CIESC Journal, 2023, 74(7): 2848-2857. |
[15] | Fangzhe SHI, Yunhua GAN. Numerical simulation of start-up characteristics and heat transfer performance of ultra-thin heat pipe [J]. CIESC Journal, 2023, 74(7): 2814-2823. |
Viewed | ||||||||||||||||||||||||||||||||||||||||||||||||||
Full text 162
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||
Abstract 565
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||