CIESC Journal ›› 2014, Vol. 65 ›› Issue (7): 2793-2801.DOI: 10.3969/j.issn.0438-1157.2014.07.041

Previous Articles     Next Articles

Modeling and techno-economic analysis for comprehensive utilization process of oil shale

YANG Qingchun, ZHANG Jun, YANG Siyu, QIAN Yu   

  1. School of Chemical Engineering, South China University of Technology, Guangzhou 510640, Guangdong, China
  • Received:2014-03-31 Revised:2014-04-16 Online:2014-07-05 Published:2014-07-05
  • Supported by:

    supported by the National Natural Science Foundation of China (21136003, 21306056) and the National Basic Research Program of China (2014CB744306).

油页岩综合利用过程建模与技术经济分析

杨庆春, 张俊, 杨思宇, 钱宇   

  1. 华南理工大学化学与化工学院, 广东 广州 510640
  • 通讯作者: 钱宇
  • 基金资助:

    国家自然科学基金项目(21136003,21306056);国家重点基础研究发展计划项目(2014CB744306)。

Abstract: To relieve the shortage of oil, exploration of oil shale attracts increasingly attention of different countries, especially China. However, there are few systematic studies on comprehensive utilization of oil shale. This paper models a comprehensive utilization process and analyzes its techno-economic performance, compared to a conventional pyrolysis process. Appropriate retorting temperature and air to steam ratio are selected according to oil productivity and electricity generation. The comparison suggests that the comprehensive process is more economically competitive: the return on investment increasing from 13% to 16% and the payback period decreased from 7.5 years to 6.3 years.

Key words: oil shale, retorting, comprehensive utilization, process modeling, techno-economic analysis

摘要: 面对能源资源日益短缺的局势,油页岩的开发与利用日益得到各界的重视。目前油页岩以干馏炼油为主,很少有对油页岩综合利用过程进行技术经济分析的研究。本文建立油页岩综合利用过程各基础过程的单元模型,对物流和能量流展开流程模拟和技术经济分析。结果表明,过程技术性能与能效较合理区域为:干馏温度525℃,空气与水蒸气之比为1.13。与单纯炼油过程相比,综合利用过程的投资利润率从13%提升到16%,投资回收期从7.5年缩减到6.3年。

关键词: 油页岩, 干馏, 综合利用, 过程建模, 技术经济分析

CLC Number: