CIESC Journal ›› 2017, Vol. 68 ›› Issue (6): 2386-2393.DOI: 10.11949/j.issn.0438-1157.20161850

Previous Articles     Next Articles

Preparation of bamboo carbon-based solid acid and its catalytic properties

MA Bingbing, LIU Xiben, LI Chuanliang, WEI Yi, JI Weirong   

  1. College of Chemical Engineering, Zhejiang University of Technology, Hangzhou 310014, Zhejiang, China
  • Received:2017-01-02 Revised:2017-02-26 Online:2017-06-05 Published:2017-06-05
  • Contact: 10.11949/j.issn.0438-1157.20161850
  • Supported by:

    supported by the Qianjiang Talent of Zhejiang Province (2006R10017)

竹炭碳磺酸的制备及其催化性能

马兵兵, 刘细本, 李传亮, 韦一, 计伟荣   

  1. 浙江工业大学化工学院, 浙江 杭州 310014
  • 通讯作者: 计伟荣
  • 基金资助:

    浙江省钱江人才计划项目(2006R10017)

Abstract:

Bamboo carbon-based solid acid was prepared via sulfuric acid impregnation, carbonization and sulfonation with cellulose-rich bamboo powder as feedstock, and its application in cellulose hydrolysis was studied. Firstly, the results obtained by TG of raw and modified bamboo powders and their main components showed that sulfuric acid had significant effects on breaking the chemical bonds in bamboo power to promote the pyrolysis and carbonization processes at lower temperature. The systematically research was conducted on the impregnation ratio, impregnation concentration, carbonization temperature and sulfonation temperature, which strongly affected the catalytic properties of bamboo carbon-based solid acid. Then, the optimal preparation conditions were obtained. Finally, the bamboo carbon-based solid acid was characterized by XRD, BET, FT-IR and SEM. These results indicated that the bamboo carbon-based solid catalyst had a favourable textile structure and considerable sulfonic acid content, showing that the sulfonic acid content was related to the number of active hydrogen on the aromatic carbon.

Key words: cellulose, bamboo carbon-based solid acid, preparation, hydrolysis, catalyst

摘要:

以富含纤维素的天然竹粉为原料,通过硫酸浸渍,炭化和磺化的过程,制备竹炭碳磺酸并将其应用于纤维素水解反应。首先对改性前后的竹粉及其主要成分进行热重分析,发现硫酸能打破竹粉组分之间部分原有的化学键,促进竹粉的热解过程,使竹粉在低温下进行热解与炭化。然后系统地研究浸渍比例、浸渍液浓度、炭化温度和磺化温度等因素对催化剂活性的影响,得到催化剂最优制备条件。最后采用XRD、BET、FT-IR和SEM等方法对竹炭碳磺酸进行表征,结果表明通过合理调控温度能使竹炭磺酸具有良好的孔结构和较高的磺酸量,且磺酸量可能和芳香碳环上的活泼氢数目有关。

关键词: 纤维素, 竹炭碳磺酸, 制备, 水解, 催化剂

CLC Number: