1 |
陈大鹏. 低噪声密封轴承润滑脂的性能考察[J]. 合成润滑材料, l985, 12(1): 15-17.
|
|
ChenD P. Investigation on the performance of low noise sealed bearing grease [J]. Synthetic Lubricating Material, l985, 12(1): 15-17.
|
2 |
CousseauT, GraaB M, CamposA V, et al. Influence of grease rheology on thrust ball bearings friction torque[J]. Tribology International, 2012, 46(1): 106-113.
|
3 |
BlanM R D, StamateV C, HoupertL, et al. The influence of the lubricant viscosity on the rolling friction torque[J]. Tribology International, 2014, 72(4): 1-12.
|
4 |
AcarN, KuhnE, FrancoJ. Tribological and rheological characterization of new completely biogenic lubricating greases: a comparative experimental investigation[J]. Lubricants, 2018, 6(2): 45.
|
5 |
CouronnéI, BlettnerG, VergneP. Rheological behavior of greases(Ⅰ): Effects of composition and structure[J]. Tribology Transactions, 2000, 43(4): 619-626.
|
6 |
WangZ, ChangJ, CaiC. Tribological performance of phosphonium ionic liquids as additives in lithium lubricating grease[J]. Lubricants, 2018, 6(1): 23.
|
7 |
ForsterE O, KolfenbachJ J. Viscoelastic behavior of greases[J]. ASLE Transactions, 1958, 21(2): 13-24
|
8 |
SinghJ, KumarD, TandonN. Rheological and film forming behavior of the developed nanocomposite greases under elastohydrodynamics lubrication regime[J]. Journal of Tribology, 2019, 141(2): 021804.
|
9 |
HurleyS, CannP M. Starved lubrication of EHL contacts- relationship to bulk grease properties[J]. NLGI Spokesman, 2000, 64(2): 15-23.
|
10 |
LiJ, HöglundE, WesterbergL G, et al. Rheology of lubricating grease[J]. Lube Magazine, 2015, 126: 12-18.
|
11 |
GoodrumJ W, GellerD P, AdamsT T. Rheological characterization of yellow grease and poultry fat[J]. Journal of Oil & Fat Industries, 2002, 79(10): 961-964.
|
12 |
吴宝杰, 刘庆廉. 润滑脂流变性对滚动轴承振动性能的影响[J]. 润滑与密封, 2006, 178(6): 98-101.
|
|
WuB J, LiuQ L. Influence of grease rheology on bearings vibration[J]. Lubrication Engineering, 2006, 178(6): 98-101.
|
13 |
毛菁菁, 程型国, 张遂心. 复合锂基润滑脂的流变特性与微观结构的关系研究[J]. 润滑与密封, 2013, 38(12): 79-83.
|
|
MaoJ J, ChengX G, ZhangS X. Study on relationship between rheological properties and microstructure for lithium complex grease[J]. Lubrication Engineering, 2013, 38(12): 79-83.
|
14 |
周维贵, 郭小川, 蒋明俊, 等. 基于石蜡基油的锂基润滑脂流变性研究[J]. 石油炼制与化工, 2014, (6): 90-95.
|
|
ZhouW G, GuoX C, JiangM J, et al. Study on rheology of lithium lubricating grease prepared from paraffin-case mineral luces case oil[J]. Petroleum Processing and Petrochemicals, 2014, (6): 90-95.
|
15 |
吴迪, 上官林建, 姚林晓, 等. 锂基润滑脂流变特性[J]. 河南科技大学学报(自然科学版), 2014, (4): 18-21.
|
|
WuD, ShangguanL J, YaoL X, et al. Rheological properties of lithium grease[J]. Journal of Henan University of Science & Technology (Natural Science), 2014, (4): 18-21.
|
16 |
蒋明俊, 郭小川, 姜秉新. 半流体脂流变特性的研究[J]. 合成润滑材料, 1997, (2): 5-10.
|
|
JiangM J, GuoX C, JiangB X. Study on rheological properties of semi-fluid grease[J]. Synthetic Lubricating Material, 1997, (2): 5-10.
|
17 |
DelgadoM A, FrancoJ M, KuhnE. Effect of rheological behavior of lithium greases on the friction process[J]. Industrial Lubrication & Tribology, 1948, 60(1): 37-45.
|
18 |
PavlovV P, VinogradovG V. Generalized characteristics of rheological properties of greases[J]. ASLE Lubrication Engineering, 1965, 21(11): 479-484.
|
19 |
BakerA E. Grease bleeding—a factor in ball bearing performance[J]. NLGI Spokesman, 1958, 22(9): 271-277.
|
20 |
BooserE R, WilcockD F. Minimum oil requirements of ball bearings[J]. Lubrication Engineering, 1953, 9(3): 140-143.
|
21 |
MasR, MagninA. Rheological and physical studies of lubricating greases before and after use in bearings[J]. Journal of Tribology, 1996, 118(3): 681-686.
|
22 |
ScarlettN A. Paper21: use of grease in rolling bearings[C]//Proceedings of the Institution of Mechanical Engineers, Conference Proceedings. Sage UK: London, England: SAGE Publications, 1967, 182(1): 585-624.
|
23 |
CannP M. Film thickness measurements of lubricating greases under normally starved conditions[J]. NLGI Spokesman, 1992, 56(2): 21.
|
24 |
CannP M, WilliamsonB P, CoyR C, et al. The behaviour of greases in elastohydrodynamic contacts[J]. Journal of Physics D: Applied Physics, 1992, 25(1A): A124.
|
25 |
HurleyS, CannP M. IR spectroscopic analysis of grease lubricant films in rolling contacts[M]//Tribology Series. Amsterdam: Elsevier, 1999, 36: 589-600.
|
26 |
FarcasF, GafitanuM D. Some influence parameters on greases lubricated rolling contacts service life[J]. Wear, 1999, 225: 1004-1010.
|
27 |
MilneA A, ScottD, ScottH M. Observations on the movement and structure of grease in roller-bearings[C]//Proceedings of The Conference on Lubrication and Wear. 1957: 450-453.
|
28 |
LansdownA R, GuptaR, BooserE R. The influence of evaporation on grease life[J]. NLGI Spokesman, 1985, 49(4): 148-153.
|
29 |
CannP M, DonerJ P, WebsterM N, et al. Grease degradation in rolling element bearings[J]. Tribology Transactions, 2001, 44(3): 399-404.
|
30 |
CannP M, WebsterM N, DonerJ P, et al. Grease degradation in R0F bearing tests[J]. Tribology Transactions, 2007, 50(2): 187-197.
|
31 |
WikströmV, HöglundE. Starting and steady-state friction torque of grease-lubricated rolling element bearings at low temperatures(Ⅱ): Correlation with less-complex test methods[J]. Tribology Transactions, 1996, 39(3): 684-690.
|
32 |
DalmazG, NantuaR. An evaluation of grease behavior in rolling bearing contacts[J]. Lubrication Engineering, 1987, 43(12): 905-915.
|
33 |
MilseA A. Theory of rheodynamic lubrication for a Maxwell liquid[C]//Proc. Conf. on Lub. and Wear. 1957.
|
34 |
O’HalloranR, KolfenbachJ J, LelandH L. Grease flow in shielded bearing[J]. Lubrication Engineering, 1958, 14: 104-107, 117.
|
35 |
HorthA C, NortonJ H, PattendeW C. Temperature rise characteristics of greases in rolling element bearings[J]. Lubrication Engineering, 1971, 27(11): 380.
|
36 |
王世芳. 轴承润滑和润滑脂的流变性[J]. 润滑与密封, 1980, (6): 35-41.
|
|
WangS F. Bearing lubrication and rheology of grease[J]. Lubrication Engineering, 1980, (6): 35-41.
|