1 |
Feng X, Ouyang M, Liu X, et al. Thermal runaway mechanism of lithium ion battery for electric vehicles: a review[J]. Energy Storage Materials, 2018, 10: 246-267.
|
2 |
Zhang W J. Structure and performance of LiFePO4 cathode materials: a review[J]. Journal of Power Sources, 2011, 196(6): 2962-2970.
|
3 |
杨杰, 王婷, 杜春雨, 等. 锂离子电池模型研究综述[J]. 储能科学与技术, 2019, 8(1): 58-64.
|
|
Yang J, Wang T, Du C Y, et al. Overview of the modeling of lithium-ion batteries[J]. Energy Storage Science and Technology, 2019, 8(1): 58-64.
|
4 |
Jokar A, Rajabloo B, Désilets M, et al. Review of simplified pseudo-two-dimensional models of lithium-ion batteries[J]. Journal of Power Sources, 2016, 327: 44-55.
|
5 |
Doyle M, Fuller T F, Newman J. Modeling of galvanostatic charge and discharge of the lithium/polymer/insertion cell[J]. Journal of the Electrochemical Society, 1993, 140(6): 1526-1533.
|
6 |
Doyle M, Newman J. The use of mathematical modeling in the design of lithium/polymer battery systems[J]. Electrochimica Acta, 1995, 40(13/14): 2191-2196.
|
7 |
Yu S, Kim S, Kim T Y, et al. Transportation properties in nanosized LiFePO4 positive electrodes and their effects on the cell performance[J]. Journal of Applied Electrochemistry, 2013, 43(3): 253-262.
|
8 |
Heubner C, Schneider M, Michaelis A. Diffusion-limited C-rate: a fundamental principle quantifying the intrinsic limits of Li-ion batteries[J]. Advanced Energy Materials, 2020, 10(2): 1902523.
|
9 |
许于, 陈怡沁, 周静红, 等. LiFePO4锂离子电池的数值模拟:正极材料颗粒粒径的影响[J]. 化工学报, 2020, 71(2): 821-830.
|
|
Xu Y, Chen Y Q, Zhou J H, et al. Numerical simulation of lithium-ion battery with LiFePO4 as cathode material: effect of particle size[J]. CIESC Journal, 2020, 71(2): 821-830.
|
10 |
Chen L, Chen Z, Liu S, et al. Effects of particle size distribution on compacted density of lithium iron phosphate 18650 battery[J]. Journal of Electrochemical Energy Conversion and Storage, 2018, 15(4): 041011.
|
11 |
Zhang Y, Wang Z B, Nie M, et al. A simple method for industrialization to enhance the tap density of LiNi0.5Co0.2Mn0.3O2 cathode material for high-specific volumetric energy lithium-ion batteries[J]. RSC Advances, 2016, 6(70): 65941-65949.
|
12 |
Hong J, Wei W, He G. Optimizing the particle-size distribution and tap density of LiFePO4/C composites containing excess lithium[J]. Ionics, 2019, 25(5): 2035-2039.
|
13 |
Yu S, Chung Y, Song M S, et al. Investigation of design parameter effects on high current performance of lithium-ion cells with LiFePO4/graphite electrodes[J]. Journal of Applied Electrochemistry, 2012, 42(6): 443-453.
|
14 |
Röder F, Sonntag S, Schröder D, et al. Simulating the impact of particle size distribution on the performance of graphite electrodes in lithium-ion batteries[J]. Energy Technology, 2016, 4(12): 1588-1597.
|
15 |
Goldin G M, Colclasure A M, Wiedemann A H, et al. Three-dimensional particle-resolved models of Li-ion batteries to assist the evaluation of empirical parameters in one-dimensional models[J]. Electrochimica Acta, 2012, 64: 118-129.
|
16 |
Kikukawa H, Honkura K, Koyama M. Influence of inter-particle resistance between active materials on the discharge characteristics of the positive electrode of lithium ion batteries[J]. Electrochimica Acta, 2018, 278: 385-395.
|
17 |
Awarke A, Lauer S, Wittler M, et al. Quantifying the effects of strains on the conductivity and porosity of LiFePO4 based Li-ion composite cathodes using a multi-scale approach[J]. Computational Materials Science, 2011, 50(3): 871-879.
|
18 |
郭孝东, 钟本和, 唐艳, 等. 一次粒径和二次粒径对LiFePO4性能的影响[J]. 高校化学工程学报, 2013, 27(5): 884-888.
|
|
Guo X D, Zhong B H, Tang Y, et al. The influence of primary particle size and secondary particle size on performances of LiFePO4[J]. Journal of Chemical Engineering of Chinese Universities, 2013, 27(5): 884-888.
|
19 |
Ye Y, Shi Y, Tay A A O. Electro-thermal cycle life model for lithium iron phosphate battery[J]. Journal of Power Sources, 2012, 217: 509-518.
|
20 |
Shirazi A H N, Azadi Kakavand M R, Rabczuk T. Numerical study of composite electrode's particle size effect on the electrochemical and heat generation of a Li-ion battery[J]. Journal of Nanotechnology in Engineering and Medicine, 2015, 6(4): 041003.
|
21 |
Liu H, Strobridge F C, Borkiewicz O J, et al. Capturing metastable structures during high-rate cycling of LiFePO4 nanoparticle electrodes[J]. Science, 2014, 344(6191): 1252817.
|
22 |
Sheu S P, Yao C Y, Chen J M, et al. Influence of the LiCoO2 particle size on the performance of lithium-ion batteries[J]. Journal of Power Sources, 1997, 68: 533-535.
|
23 |
施柳柳. 以LiFePO4为正极材料的电极制备工艺研究[D]. 上海: 华东理工大学, 2018: 20-33.
|
|
Shi L L. Optimization of preparation process of LiFePO4 cathode[D]. Shanghai: East China University of Science and Technology, 2018: 20-33.
|
24 |
Li Y, Meyer S, Lim J, et al. Effects of particle size, electronic connectivity, and incoherent nanoscale domains on the sequence of lithiation in LiFePO4 porous electrodes[J]. Adv. Mater., 2015, 27(42): 6591-6597.
|
25 |
Lee K, Kum D. The impact of inhomogeneous particle size distribution on Li-ion cell performance under galvanostatic and transient loads[C]// Asia-Pacific IEEE Transportation Electrification Conference & Expo. Busan, South Korea. IEEE, 2016: 454-459.
|