1 |
Fan E S, Li L, Wang Z P, et al. Sustainable recycling technology for Li-ion batteries and beyond: challenges and future prospects[J]. Chemical Reviews, 2020, 120(14): 7020-7063.
|
2 |
Feng X N, Ouyang M G, Liu X, et al. Thermal runaway mechanism of lithium ion battery for electric vehicles: a review[J]. Energy Storage Materials, 2018, 10: 246-267.
|
3 |
Li Y C, Zhang Y P, Ma J J, et al. Synthesis of LiFePO4 nanocomposite with surface conductive phase by Zr doping with Li excess for fast discharging[J]. Journal of The Electrochemical Society, 2019, 166(2): A410-A415.
|
4 |
Wang D, Liu W H, Zhang X H, et al. Review of modified nickel-cobalt lithium aluminate cathode materials for lithium-ion batteries[J]. International Journal of Photoenergy, 2019, 2019(8): 1-13.
|
5 |
Zheng H H, Li J, Song X Y, et al. A comprehensive understanding of electrode thickness effects on the electrochemical performances of Li-ion battery cathodes[J]. Electrochimica Acta, 2012, 71: 258-265.
|
6 |
Suthar B, Northrop P W C, Rife D, et al. Effect of porosity, thickness and tortuosity on capacity fade of anode[J]. Journal of the Electrochemical Society, 2015, 162(9): A1708-A1717.
|
7 |
Antartis D, Dillon S, Chasiotis I. Effect of porosity on electrochemical and mechanical properties of composite Li-ion anodes[J]. Journal of Composite Materials, 2015, 69(15): 303-308.
|
8 |
Jo M, Hong Y S, Choo J, et al. Effect of LiCoO2 cathode nanoparticle size on high rate performance for Li-ion batteries[J]. Journal of the Electrochemical Society, 2009, 156(6): A430-A434.
|
9 |
Srinivasan V, Newman J. Design and optimization of a natural graphite/iron phosphate lithium-ion cell[J]. Journal of the Electrochemical Society, 2004, 151(10): A1530.
|
10 |
Cobb C L, Solberg S E. Communication—analysis of thick co-extruded cathodes for higher-energy-and-power lithium-ion batteries[J]. Journal of the Electrochemical Society, 2017, 164(7): A1339-A1341.
|
11 |
许于, 陈怡沁, 周静红, 等. LiFePO4锂离子电池的数值模拟: 正极材料颗粒粒径的影响[J]. 化工学报, 2020, 71(2): 821-830.
|
|
Xu Y, Chen Y Q, Zhou J H, et al. Numerical simulation of lithium-ion battery with LiFePO4 as cathode material: effect of particle size[J]. CIESC Journal, 2020, 71(2): 821-830.
|
12 |
陈怡沁, 许于, 周静红, 等. 锂离子电池异构建模及内部传质机理探究: 粒径分布的影响[J]. 化工学报, 2021, 72(2): 1078-1088.
|
|
Chen Y Q, Xu Y, Zhou J H, et al. Heterogeneous modeling and internal mass transfer mechanism of lithium-ion batteries: effect of particle size distribution[J]. CIESC Journal, 2021, 72(2): 1078-1088.
|
13 |
Yamazaki A, Orikasa Y, Chen K, et al. In-situ measurement of the lithium distribution in Li-ion batteries using micro-IBA techniques[J]. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions With Materials and Atoms, 2016, 371: 298-302.
|
14 |
查全性. 电极过程动力学导论[M]. 3版. 北京: 科学出版社, 2002.
|
|
Zha Q X. Introduction to Electrode Process Dynamics[M]. 3rd ed. Beijing: Science Press, 2002.
|
15 |
Park J, Hyeon S, Jeong S, et al. Performance enhancement of Li-ion battery by laser structuring of thick electrode with low porosity[J]. Journal of Industrial and Engineering Chemistry, 2019, 70: 178-185.
|
16 |
Wang C P, Lopatin S D, Bachrach R Z, et al. Graded electrode technologies for high energy lithium-ion batteries: US20110168550[P]. 2011-07-14.
|
17 |
Wang B C, Hong Y F, Wang L, et al. Development and numerical investigation of novel gradient-porous heat sinks[J]. Energy Conversion and Management, 2015, 106: 1370-1378.
|
18 |
Qin J, Zhou X, Zhao C Y, et al. Numerical investigation on boiling mechanism in porous metals by LBM at pore scale level[J]. International Journal of Thermal Sciences, 2018, 130: 298-312.
|
19 |
Pompe W, Worch H, Epple M, et al. Functionally graded materials for biomedical applications[J]. Materials Science and Engineering: A, 2003, 362(1/2): 40-60.
|
20 |
Biesheuvel P M, Breedveld V, Higler A P, et al. Graded membrane supports produced by centrifugal casting of a slightly polydisperse suspension[J]. Chemical Engineering Science, 2001, 56(11): 3517-3525.
|
21 |
Yang J L, Yang L J, Xu C, et al. Numerical analysis on thermal behavior of solid-liquid phase change within copper foam with varying porosity[J]. International Journal of Heat and Mass Transfer, 2015, 84: 1008-1018.
|
22 |
Jeong J, Lee H, Choi J, et al. Effect of LiFePO4 cathode density and thickness on electrochemical performance of lithium metal polymer batteries prepared by in situ thermal polymerization[J]. Electrochimica Acta, 2015, 154: 149-156.
|
23 |
赵丰刚, 陈治, 汪颖, 等. 具有良好电化学性能的厚电极及其制备方法: 102324493B[P]. 2016-03-30.
|
|
Zhao F G, Chen Z, Wang Y, et al. Thick electrode with good electrochemical performance and its preparation method: 102324493B[P]. 2016-03-30.
|
24 |
杨续来, 张峥, 曹勇, 等. 高能量密度锂离子电池结构工程化技术探讨[J]. 储能科学与技术, 2020, 9(4): 1127-1136.
|
|
Yang X L, Zhang Z, Cao Y, et al. The structural engineering for achieving high energy density Li-ion batteries[J]. Energy Storage Science and Technology, 2020, 9(4): 1127-1136.
|
25 |
Singh M, Kaiser J, Hahn H. A systematic study of thick electrodes for high energy lithium ion batteries[J]. Journal of Electroanalytical Chemistry, 2016, 782: 245-249.
|