大功率PEMFC空气供给系统建模与实验验证

doi:10.11949/j.issn.0438-1157.20151377

化工学报 ›› 2016, Vol. 67 ›› Issue (5): 2109-2116.DOI: 10.11949/j.issn.0438-1157.20151377

大功率PEMFC空气供给系统建模与实验验证

马智文, 曾怡达, 李伦

西南交通大学电气工程学院, 四川成都 610031

收稿日期:2015-08-31 修回日期:2015-12-07 出版日期:2016-05-05 发布日期:2016-05-05
通讯作者: 曾怡达
基金资助:
国家科技支撑计划项目(2014BAG08B01);国家自然科学基金项目(61473238,51407146);四川省科技支撑计划项目(2014GZ0099);西南交通大学研究生创新实验实践项目(YC201503104)。

Modeling and experimental verification of air supply system in large power PEMFC

MA Zhiwen, ZENG Yida, LI Lun

School of Electric Engineering, Southwest Jiaotong University, Chengdu 610031, Sichuan, China

Received:2015-08-31 Revised:2015-12-07 Online:2016-05-05 Published:2016-05-05
Supported by:
supported by National Science and Technology Support Program (2014BAG08B01), the National Natural Science Foundation of China (61473238, 51407146), Sichuan Province Science and Technology Support Program (2014GZ0099) and Southwest Jiaotong University Graduate Students Innovative Experimental Project (YC201503104).

摘要/Abstract

摘要：

近年来,质子交换膜燃料电池(PEMFC)作为车载燃料电池的主要动力源受到广泛关注。空气压缩机为电堆提供系统所需的氧气和阴极压力,是质子交换膜燃料电池系统中必不可少的一部分,其工作性能对燃料电池稳态和动态工作性能有很大的影响。基于实验室已有150 kW质子交换膜燃料电池系统,对离心式空压机的工作特性进行了研究,建立了包含离心式空气压缩机的空气供给系统应用模型。通过实验验证,仿真模型能够准确地反映离心式空压机与空气系统的特性,同时能真实反映包含离心式空压机的大功率质子交换膜燃料电池空气系统的稳态控制效果,以及不同控制策略下的动态响应效果。该模型对研究大功率质子交换膜燃料电池空气供给系统以及相应的控制策略提供理论支持,仿真模型与实验结果为下一步控制策略优化提供基础与参考。

关键词: PEMFC, 离心式空压机, 建模, 仿真, 控制

Abstract:

Recently, proton exchange membrane fuel cell(PEMFC)as main power source of vehicles is widely concerned. Air compressor is one of important components in a PEMFC system and provides required oxygen and pressure for the cathode in electrochemical reactor of PEMFC. Its working performance has a great influence on the steady and dynamic performance of the fuel cell. Using a 150 kW proton exchange membrane fuel cell system in our laboratory, the working characteristics of its centrifugal air compressor are studied, and an application model for the air supplying system of the fuel cell is established, which involves the centrifugal air compressor. The results of experimental verification indicate that the simulation model can reflect accurately the characteristics of the centrifugal air compressor and the air supplying system. And the model can truly describe the steady control effect of the air system with the centrifugal air compressor in the large power PEMFC as well as the dynamic response of the different control strategies. The model provides theoretical support for the study of the air supply system of high power PEMFC and the corresponding control strategy. The simulation model and experimental results are an important basis and reference for the optimization of the next control strategy.

Key words: PEMFC, centrifugal air compressor, modeling, simulation, control

中图分类号:

TM911.4

马智文, 曾怡达, 李伦. 大功率PEMFC空气供给系统建模与实验验证[J]. 化工学报, 2016, 67(5): 2109-2116.

MA Zhiwen, ZENG Yida, LI Lun. Modeling and experimental verification of air supply system in large power PEMFC[J]. CIESC Journal, 2016, 67(5): 2109-2116.

参考文献 17

[1]	毛宗强. 氢能——我国未来的清洁能源 [J]. 化工学报,2004, 55 (S1): 296-302. MAO Z Q. Hydrogen—a future clear energy carrier in China [J]. Journal of Chemical Industry and Engineering (China), 2004, 55 (S1): 296-302.
[2]	WANG Y, CHEN K S, MISHLER J. A review of polymer and needs on fundamental research [J]. Applied Energy, 2011, 88 (4): 981-1007. DOI: 10.1016/j.apenergy.2010.09.030.
[3]	BLUNIER B, MIRAOUI A. Proton exchange membrane fuel cell air management in automotive applications [J]. Fuel Cell Sci. Technol., 2010, 7 (4): 041007-1-041007-11. DOI: 10.1115/1.4000627.
[4]	BLUNIER B, PUCCI M, CIRRINCIONE G, et al. A scroll compressor with a high-performance induction motor drive for the air management of a PEMFC system for automotive applications [J]. IEEE Trans. Ind. Appl., 2008, 44 (6):1966-1976. DOI: 10.1109/TIA.2008.2006304.
[5]	BLUNIER B, CIRRINCIONE G, HERY E Y, et al. A new analytical and dynamical model of a scroll compressor with experimental validation [J]. International Journal of Refrigeration, 2009, 32 (5): 874-891. DOI:10.1016/j.ijrefrig.2008.11.009.
[6]	韩永杰, 诸葛伟林, 汪茂海,等. 采用离心式空压机的燃料电池系统性能仿真研究 [J]. 汽车工程, 2004, 30 (1): 36-39. DOI: 10.3321/j.issn:1000-680X.2008.01.008. HAN Y J, ZHUGE W L, WANG M H, et al. A simulation on fuel cell system based on centrifugal compressor [J]. Automotive Engineering, 2004, 30 (1): 36-39. DOI:10.3321/j.issn:1000-680X.2008.01.008.
[7]	BARCHEWITZ L P, SEUME J R. Dynamic modelling and controls of an air supply system for in-flight proton exchange membrane fuel cells (PEM-FC) [C]//ASME Turbo Expo 2007: Power for Land, Sea, and Air, Montreal Canada Proceedings of GT2007. 2007: 14-17.
[8]	ZHAO D D, BLUNIER B, GAO F, et al. Control of an ultrahigh-speed centrifugal compressor for the air management of fuel cell systems [J]. Industry Applications, 2014, 50 (3): 2225-2234. DOI: 10.1109/TIA.2013.2282838.
[9]	ZHAO D D, QING Z, GAO F. Disturbance decoupling control of an ultra-high speed centrifugal compressor for the air management of fuel cell systems [J]. Hydrogen Energy, 2014, 39 (4): 1788-1798. DOI: 10.1016/j.ijhydene.2013.11.057.
[10]	ZHAO D D, GAO F, BOUQUAIN D. Sliding-mode control of an ultrahigh-speed centrifugal compressor for the air management of fuel-cell systems for automotive applications [J]. Vehicular Technology, 2014, 63 (1): 51-61. DOI: 10.1109/TVT.2013.2274046.
[11]	张立炎, 潘牧, 全书海. 质子交换膜燃料电池系统建模和控制的综述 [J]. 系统仿真学报, 2008, 20 (4): 850-854. ZHANG L Y, PAN M, QUAN S H. Modeling and dynamic simulation of air supply system in proton exchange membrane fuel cell [J]. Journal of System Simulation, 2008, 20 (4): 850-854. DOI: 10.1109/PACIIA.2008.298.
[12]	马天才. 燃料电池发动机控制问题研究——系统分析与建模 [D]. 上海: 同济大学, 2007. MA T C. Study on the control of fuel cell engine—system analysis and modeling [D]. Shanghai: Tongji University, 2007.
[13]	VAHID A, KOLMANOVSKY I, TEFANOPOULOU A. Constraint management in fuel cells: a fast reference governor approach[C]//American Control Conference, 2005. IEEE, 2005:3865-3870.
[14]	PUKRUSHPAN J T. Modeling and control of fuel cell systems and fuel processors[D]. Michigan: The University of Michigan, 2003.
[15]	THOMAS P. Simulation of Industrial Processes for Control Engineers [M]. Ringgold: Lightning Source Inc, 2000:77-87.
[16]	GRUJICIC M, CHITTAJIALLU K, LAW E, et al. Model-based control strategies in the dynamic interaction of air supply and fuel cell [J]. Power and Energy, 2004, 218 (7): 487-499. DOI: 10.1243/0957650042456999.
[17]	PILLONI A, PISANO A, USAI E. Observer-based air excess ratio control of a PEM fuel cell system via high-order sliding mode [J]. Industrial Electronics, 2015, 62 (8): 5236-5246. DOI: 10.1109/TIE.2015.2412520.

大功率PEMFC空气供给系统建模与实验验证

Modeling and experimental verification of air supply system in large power PEMFC

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 17

相关文章 15

编辑推荐

Metrics

本文评价

[1]	杨欣, 王文, 徐凯, 马凡华. 高压氢气加注过程中温度特征仿真分析[J]. 化工学报, 2023, 74(S1): 280-286.
[2]	宋嘉豪, 王文. 斯特林发动机与高温热管耦合运行特性研究[J]. 化工学报, 2023, 74(S1): 287-294.
[3]	张思雨, 殷勇高, 贾鹏琦, 叶威. 双U型地埋管群跨季节蓄热特性研究[J]. 化工学报, 2023, 74(S1): 295-301.
[4]	黄琮琪, 吴一梅, 陈建业, 邵双全. 碱性电解水制氢装置热管理系统仿真研究[J]. 化工学报, 2023, 74(S1): 320-328.
[5]	康飞, 吕伟光, 巨锋, 孙峙. 废锂离子电池放电路径与评价研究[J]. 化工学报, 2023, 74(9): 3903-3911.
[6]	曹跃, 余冲, 李智, 杨明磊. 工业数据驱动的加氢裂化装置多工况切换过渡状态检测[J]. 化工学报, 2023, 74(9): 3841-3854.
[7]	陈国泽, 卫东, 郭倩, 向志平. 负载跟踪状态下的铝空气电池堆最优功率点优化方法[J]. 化工学报, 2023, 74(8): 3533-3542.
[8]	邵伟明, 韩文学, 宋伟, 杨勇, 陈灿, 赵东亚. 基于分布式贝叶斯隐马尔可夫回归的动态软测量建模方法[J]. 化工学报, 2023, 74(6): 2495-2502.
[9]	苏晓丹, 朱干宇, 李会泉, 郑光明, 孟子衡, 李防, 杨云瑞, 习本军, 崔玉. 湿法磷酸半水工艺考察与石膏结晶过程研究[J]. 化工学报, 2023, 74(4): 1805-1817.
[10]	徐银, 蔡洁, 陈露, 彭宇, 刘夫珍, 张晖. 异相可见光催化耦合过硫酸盐活化技术在水污染控制中的研究进展[J]. 化工学报, 2023, 74(3): 995-1009.
[11]	张中秋, 李宏光, 石逸林. 基于人工预测调控策略的复杂化工过程多任务学习方法[J]. 化工学报, 2023, 74(3): 1195-1204.
[12]	张江淮, 赵众. 碳三加氢装置鲁棒最小协方差约束控制及应用[J]. 化工学报, 2023, 74(3): 1216-1227.
[13]	王雪松, 曾祥宇, 薄翠梅, 汤舒淇, 董超, 李俊, 张泉灵, 金晓明, 叶胜利. PTFE间歇聚合反应过程变周期动态经济优化控制[J]. 化工学报, 2022, 73(9): 3973-3982.
[14]	周乐, 沈程凯, 吴超, 侯北平, 宋执环. 深度融合特征提取网络及其在化工过程软测量中的应用[J]. 化工学报, 2022, 73(7): 3156-3165.
[15]	王琨, 侍洪波, 谭帅, 宋冰, 陶阳. 局部时差约束邻域保持嵌入算法在故障检测中的应用[J]. 化工学报, 2022, 73(7): 3109-3119.