阿司匹林结晶过程的在线分析

doi:10.11949/j.issn.0438-1157.20171147

摘要/Abstract

摘要：

晶体的颗粒尺寸分布和形状是结晶产品的两个关键质量指标，不仅影响结晶产品的性质，还影响下游的过滤、干燥及运输存储等过程。利用超声粒度分析仪、衰减全反射傅里叶红外光谱仪、浊度仪与二维成像系统等分析仪器在线测量了不同搅拌速率和不同降温速率下阿司匹林乙醇溶液结晶过程中温度、浓度、颗粒尺寸分布和形状的变化情况。实验结果表明：较低的降温速率或者较大的搅拌速率条件下得到含有大量细晶的阿司匹林结晶产品；较高的降温速率下得到长宽比较大的阿司匹林结晶产品。调节降温速率和搅拌速率是一种有效控制阿司匹林结晶产品尺寸分布与形状的方法。

关键词: 阿司匹林, 结晶, 在线测量, 粒度分布, 晶体形状

Abstract:

Size distribution and geometry are key properties of crystal products, which can affect product quality and downstream processes of filtration, drying, storage and transportation. An on-line process analysis system, including ultrasonic particle size analyzer, attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), turbidity analyzer and two-dimensional imaging system, was developed to monitor crystallization of Aspirin ethanol solution at various stirring and cooling rates. The results show that lower cooling or faster stirring rate produces more amount of fine crystals and higher cooling rate yields product with larger mean size and higher aspect ratio (AR). Therefore, adjusting cooling and stirring rate is an effective technique to control particle size distribution and shape of Aspirin crystals.

Key words: Aspirin, crystallization, online measurement, particle size distribution, crystal shape

中图分类号:

TQ016

李兰菊, 李秀喜, 徐三. 阿司匹林结晶过程的在线分析[J]. 化工学报, 2018, 69(3): 1046-1052.

LI Lanju, LI Xiuxi, XU San. Online monitor of Aspirin crystallization process[J]. CIESC Journal, 2018, 69(3): 1046-1052.

参考文献 31

[1]	WIECKHUSEN D, BECKMANN W. Crystallization:Basic Concepts and Industrial Applications[M]. Weinheim:Wiley-VCH Verlag GmbH & Co. KGaA, 2013:1-7.
[2]	龚俊波, 陈明洋, 黄翠, 等. 面向清洁生产的制药结晶[J]. 化工学报, 2015, 66(9):3271-3278. GONG J B, CHEN M Y, HUANG C, et al. Clean production of pharmaceutical crystallization[J]. CIESC Journal, 2015, 66(9):3271-3278.
[3]	ROHANI S, HORNE S, MURTHY K. Control of product quality in batch crystallization of pharmaceuticals and fine chemicals(Ⅰ):Design of the crystallization process and the effect of solvent[J]. Organic Process Research & Development, 2005, 9(6):58-872.
[4]	LOVETTE M A, BROWNING A R, GRIFFIN D W. Crystal shape engineering[J]. Industrial & Engineering Chemistry Research, 2008, 47(24):9812-9833.
[5]	ACEVEDO D, TANDY Y, NAGY Z K. Multiobjective optimization of an unseeded batch cooling crystallizer for shape and size manipulation[J]. Industrial & Engineering Chemistry Research, 2015, 54(7):2156-2166.
[6]	EISENSCHMIDT H, BAJCINCA N, SUNDMACHER K. Optimal control of crystal shapes in batch crystallization experiments by growth-dissolution cycles[J]. Crystal Growth & Design, 2016, 6(6):3297-3306.
[7]	YU L X, LIONBERGER R A, RAW A S, et al. Applications of process analytical technology to crystallization processes[J]. Advanced Drug Delivery Reviews, 2004, 56 (3):349-369.
[8]	RATHORE A S, BHAMBURE R, GHARE V. Process analytical technology (PAT) for biopharmaceutical products[J]. Analytical & Bioanalytical Chemistry, 2010, 398(1):137-154.
[9]	BORDAWEKAR S. Industry perspectives on process analytical technology:tools and applications in API manufacturing[J]. Organic Process Research & Development, 2015, 19(9):1174-1185.
[10]	SIMON L L. Assessment of recent process analytical technology (PAT) trends:a multiauthor review[J]. Organic Process Research & Development, 2015, 19(1):3-62.
[11]	BOONKHAO B. On-line characterisation techniques for manufacture of nanomaterials[D]. London:University of Leeds, 2011.
[12]	MOORE J, CERASOLI E. Particle Light Scattering Methods and Applications[M]//Encyclopedia of Spectroscopy and Spectrometry. 2nd ed. Oxford:Academic Press, 2010:2077-2088.
[13]	PENCHEV R Y. Monitoring and controlling crystal size during industrial batch crystallization processes via the use of ATR-FTIR and acoustic attenuation spectroscopy techniques[D]. London:University of Leeds, 2007.
[14]	BUTT H J, CAPPELLA B, KAPPL M. Force measurements with the atomic force microscope:technique, interpretation and applications[J]. Surface Science Reports, 2005, 59(1):1-152.
[15]	FORRESTER D M, HUANG J, PINFIELD V J. Characterize of colloidal dispersions using ultrasound spectroscopy and multiple-scattering theory inclusive of shear-wave effects[J]. Chemical Engineering Research & Design, 2016, 114(1):69-78.
[16]	HÜBSCHEN G. Ultrasonic techniques for materials characterization[M]//Materials Characterization Using Nondestructive Evaluation (NDE) Methods. Woodhead Publishing, 2016:177-224.
[17]	GUEDRA M, BRASIER V T, CONOIR J M. Influence of shell compressibility on the ultrasonic properties of polydispersedsuspensions of nanometric encapsulated droplets[J]. Journal of the Acoustical Society of America, 2014, 135(3):1044-1055.
[18]	侯怀书, 苏明旭, 蔡小舒. 超细颗粒悬浊液超声衰减谱与声速谱测量研究[J]. 仪器仪表学报, 2010, 31(2):241-247. HOU H S, SU M X, CAI X S. Study on measurement of ultrasonic attenuation and velocity spectra in superfine particle suspensions[J]. Chinese Journal of Scientific Instrument, 2010, 31(2):241-247.
[19]	RICHTER A, VOIGT T, RIPPERGER S. Ultrasonic attenuation spectroscopy of emulsions with droplet sizes greater than 10μm[J]. Journal of Colloid and Interface Science, 2007, 315(2):482-492.
[20]	ZHANG Y, LIU J J, ZHANG L, et al. Particle shape characterisation and classification using automated microscopy and shape descriptors in batch manufacture of particulate solids[J]. Particuology, 2016, 24(1):61-68.
[21]	ZHANG R, MA C H, LIU J J, et al. On-line measurement of the real size and shape of crystals in stirred tank crystalliser using non-invasive stereo vision imaging[J]. Chemical Engineering Science, 2015, 137(1):9-12.
[22]	CALDERON D J, WANG X Z, LAI X, et al. Real-time product morphology monitoring in crystallization using imaging technique[J]. AIChE Journal, 2005, 51(5):1406-1414.
[23]	LARSEN P A, RAWLINGS J B, FERRIER N J. Model-based object recognition to measure crystal size and shape distributions from in situ video images[J]. Chemical Engineering Science, 2007, 62(5):1430-1441.
[24]	BRITTAIN H G. What is the "correct" method to use for particle-size determination[J]. Pharmaceutical Technology, 2001, 25(1):96-98.
[25]	SPELT P M, NORATO M A, SANGANI A S, et al. Determination of particle size distributions from acoustic wave propagation measurements[J]. Physics of Fluids, 1999, 11(5):1065-1080.
[26]	DUKHIN A S, GOETZ P J. Ultrasound for Characterizing Colloids:Particle Sizing, Zeta Potential, Rheology[M]. Mount Kisco:Dispersion Technology Inc., 2002:119-169.
[27]	SHUKLA A, PRAKASH A, ROHANI S. Particle size monitoring in dense suspension using ultrasound with an improved model accounting for low-angle scattering[J]. AIChE Journal, 2010, 56(11):2825-2837.
[28]	陈慧萍, 张国荣, 骆亚涛, 等. 阿司匹林-乙醇的结晶热力学研究[J].化学工程, 2015, 43(10):35-38. CHEN H P, ZHANG G R, LUO Y T, et al. Crystallization thermodynamics of Aspirin in ethanol[J]. Chemical Engineering(China), 2015, 43(10):35-38.
[29]	张海涛, 邓惠尹, 王静康, 等. 头孢噻肟钠在水-异丙醇中的液固平衡测量与关联[J]. 天津大学学报, 2007, 40(3):289-293. ZHANG H T, DENG H Y, WANG J K, et al. Measurement and correlation of liquid-solid equilibrium of Cefotaxime sodium in water-isopropanol[J]. Journal of Tianjin University, 2007, 40(3):289-293.
[30]	孟庆芬, 董亚萍, 李武. 硼酸水溶液介稳区性质的研究[J]. 无机盐工业, 2007, 39(1):25-27. MENG Q F, DONG Y P, LI W. A study on the property of boric acid aqueous solution in metastable zone[J]. Inorganic Chemicals Industry, 2007, 39(1):25-27.
[31]	付贵珍. 两种晶体成核理论研究概述[J]. 山东陶瓷, 2013, 36(3):18-22. FU G Z. Research description of two kinds of nucleation of crystals theories[J]. Shandong Ceramics, 2013, 36(3):18-22.

相关文章 15

[1]	于宏鑫, 邵双全. 水结晶过程的分子动力学模拟分析[J]. 化工学报, 2023, 74(S1): 250-258.
[2]	傅予, 刘兴翀, 王瀚雨, 李海敏, 倪亚飞, 邹文静, 雷月, 彭永姗. F₃EACl修饰层对钙钛矿太阳能电池性能提升的研究[J]. 化工学报, 2023, 74(8): 3554-3563.
[3]	苏晓丹, 朱干宇, 李会泉, 郑光明, 孟子衡, 李防, 杨云瑞, 习本军, 崔玉. 湿法磷酸半水工艺考察与石膏结晶过程研究[J]. 化工学报, 2023, 74(4): 1805-1817.
[4]	王瑞恒, 何品晶, 吕凡, 章骅. 垃圾焚烧飞灰水洗后三种固液分离方法参数比较及优化[J]. 化工学报, 2023, 74(4): 1712-1723.
[5]	陈毓明, 历伟, 严翔, 王靖岱, 阳永荣. 初生态聚乙烯聚集态结构调控研究进展[J]. 化工学报, 2023, 74(2): 487-499.
[6]	苏伟怡, 丁佳慧, 李春利, 王洪海, 姜艳军. 酶促反应结晶研究进展[J]. 化工学报, 2023, 74(2): 617-629.
[7]	周璇, 李孟亚, 孙杰, 岑振凯, 吕强三, 周立山, 王海涛, 韩丹丹, 龚俊波. 添加剂对氨基酸晶体生长的影响[J]. 化工学报, 2023, 74(2): 500-510.
[8]	鲁统鹏, 潘晓林, 吴鸿飞, 李煜, 于海燕. 有机絮凝剂对铁矿相沉降性能影响及其吸附机理[J]. 化工学报, 2022, 73(9): 4122-4132.
[9]	顾仁杰, 张加威, 靳雪阳, 文利雄. 微撞击流反应器制备镍钴复合氢氧化物超级电容器材料及其性能研究[J]. 化工学报, 2022, 73(8): 3749-3757.
[10]	乃学瑛, 吴鹏, 程远, 肖剑飞, 刘鑫, 董亚萍. 水热生长碱式硫酸镁纳米线结晶动力学研究[J]. 化工学报, 2022, 73(7): 3038-3044.
[11]	孙国鑫, 苟萌萱, 周诚, 常佩, 贺高红, 姜晓滨. 高浓度Na⁺//NO $3 -$ ， SO $4 2 -$ -H₂O溶液的膜蒸馏结晶耦合过程调控[J]. 化工学报, 2022, 73(7): 3078-3089.
[12]	殷海青, 马祎明, 万旭兴, 董伟兵, 张玉龙, 吴送姑. 碳酸锂气液固三相反应结晶过程研究[J]. 化工学报, 2022, 73(3): 1207-1220.
[13]	白浩隆, 付亮亮, 许光文, 白丁荣. 流化床煤燃烧过程不同气氛下的气态氮释放特征[J]. 化工学报, 2022, 73(2): 876-886.
[14]	陈雪梅, 王彤, 高玉箔, 彭鼎程, 罗雨婷. 利用激光诱导石墨烯实现高效太阳能界面蒸发[J]. 化工学报, 2022, 73(12): 5648-5659.
[15]	敬鹏程, 陈立涛, 闫传梁, 姜传祥, 夏煜翔, 于常宏, 王昊天. 超声波悬浮TBAB溶液液滴表面半笼型水合物生长过程研究[J]. 化工学报, 2022, 73(11): 4893-4902.