EA-AA共聚物增容的PVC-木质素共混物的热稳定性

doi:10.3969/j.issn.0438-1157.2012.10.045

化工学报 ›› 2012, Vol. 63 ›› Issue (10): 3324-3329.DOI: 10.3969/j.issn.0438-1157.2012.10.045

• 材料化学工程与纳米技术 • 上一篇下一篇

EA-AA共聚物增容的PVC-木质素共混物的热稳定性

刘飞跃¹, 许凯², 陈鸣才², 曹德榕¹

1. 华南理工大学化学与化工学院, 广东广州 510641;
2. 中国科学院广州化学研究所, 广东广州 510650

收稿日期:2012-02-05 修回日期:2012-03-08 出版日期:2012-10-05 发布日期:2012-10-05
通讯作者: 曹德榕
作者简介:曹德榕,刘飞跃(1970- ),男,博士后。

Thermal stability of PVC-lignin blends miscibilized by poly(ethyl acrylate-co-acrylic acid)

LIU Feiyue¹, XU Kai², CHEN Mingcai², CAO Derong¹

1. School of Chemistry and Chemical Engineering, South China University of Technology, Guangzhou 510641, Guangdong, China;
2. Guangzhou Institute of Chemistry, Chinese Academy of Sciences, Guangzhou 510650, Guangdong, China

Received:2012-02-05 Revised:2012-03-08 Online:2012-10-05 Published:2012-10-05

摘要/Abstract

摘要： 木质素分子中含有阻碍酚结构,可抑制基于自由基连锁机理的反应。而聚氯乙烯(PVC)的热降解属于自由基反应,因此用木质素与PVC共混,共混物的热稳定性应高于PVC,但PVC与木质素直接共混物的热稳定性一般都劣于PVC。制备了丙烯酸乙酯(EA)-丙烯酸(AA)共聚物乳液并用其对木质素粉末进行包覆处理。用处理后的木质素与PVC进行共混制备成PVC-木质素共混物。用热重分析法研究了共混物的热稳定性,并据扫描电子显微镜观测结果,结合木质素分子结构推测了共混物热稳定性的改善机理。结果表明,木质素用EA-AA共聚物处理后,共混物的热稳定性得到了明显改善,且优于PVC参照样(其初始分解温度和最大分解速率温度分别比PVC参照样高13℃和27℃左右)。扫描电子显微分析表明,木质素经丙烯酸酯共聚物处理后,与PVC的相容性改善显著,在PVC基体中分散良好。木质素羟基与EA-AA共聚物羧基的结合和分散颗粒的减小有效减弱了木质素的脱水作用,抑制了它对PVC的自催化脱氯化氢的促进作用,从而有效发挥了它的阻碍酚结构对PVC自催化脱氯化氢过程的抑制作用。

关键词: 聚氯乙烯, 木质素, 共混物, 热稳定性, 丙烯酸酯共聚物

Abstract: When it is added in poly(vinyl chloride)(PVC),lignin has the potential to improve the thermal stability of PVC due to its sterically hindered phenol structure.However the thermal stability of PVC-lignin blends is practically worse than that of PVC due to the poor miscibility between lignin and PVC.A novel method was adopted to improve the miscibility between lignin particles and PVC matrix in PVC-lignin blends.A copolyacrylate,poly(ethyl acrylate-co-acrylic acid)was prepared.Lignin was treated with the copolyacrylate,and blended with PVC.The results showed that the thermal stability of PVC-lignin blends was well improved after lignin was treated with the copolyacrylate.The temperature of onset decomposition was about 13℃ higher than that of control PVC and the temperature of rapidest decomposition was about 27℃ higher than that of control PVC.Microscopic morphology analysis confirmed that the miscibility between lignin and PVC matrix was well improved.The combination between hydroxyl of lignin and carboxyl of EA-AA copolymer and the smaller lignin particles in the blend weakened the dehydration of lignin.Therefore,the acceleration of lignin's dehydration on autocatalytic dehydrochlorination of PVC was retarded and the inhibition of lignin's sterically hindered phenol structure on the autocatalytic dehydrochlorination of PVC was strengthened.

Key words: polyvinyl chloride, lignin, blend, thermal stability, copolyacrylate

中图分类号:

TQ325.3

刘飞跃, 许凯, 陈鸣才, 曹德榕. EA-AA共聚物增容的PVC-木质素共混物的热稳定性[J]. 化工学报, 2012, 63(10): 3324-3329.

LIU Feiyue, XU Kai, CHEN Mingcai, CAO Derong. Thermal stability of PVC-lignin blends miscibilized by poly(ethyl acrylate-co-acrylic acid)[J]. CIESC Journal, 2012, 63(10): 3324-3329.

参考文献 21

[1]	Baileya S E,Olinb T J,Brickab R M,Adrian D D.A review of potentially low-cost sorbents for heavy metals[J].Water Res.,1999,33:2469-2479
[2]	Reale S,Tullio Di A,Spreti N,Angelis De F.Mass spectrometry in the biosynthetic and structural investigation of lignins[J].Mass Spectrom.Rev.,2004,23:87-126
[3]	Ushmarin N F,Kol'tsov N I.Lignin as a filler for rubber mixes in footwear production[J].Polym.Recycl.,2000,5:235-239
[4]	Setua D K,Shukla M K,Vineeta N,Singh H,Mathur G N.Lignin reinforced rubber composites[J].Polym.Compos.,2000,21:988-995
[5]	Sarkar S,Adhikari B.Thermal stability of lignin-hydroxy-terminated polybutadiene copolyurethanes[J].Polym.Degrad.Stab.,2001,73:169-175
[6]	Zhao B,Chen G,Liu Y,Hu K,Wu R.Synthesis of lignin base epoxy resin and its characterization[J].J.Mater.Sci.Lett.,2001,20:859-862
[7]	Sarkar S,Adhikari B.Lignin-modified phenolic resin:synthesis optimization,adhesive strength,and thermal stability[J].J.Adhes.Sci.Technol.,2000,14:1179-1193
[8]	Feldman D,Banu D,Campanelli J,Zhu H.Blends of vinylic copolymer with plasticized lignin:thermal and mechanical properties[J].J.Appl.Polym.Sci.,2001,81:861-874
[9]	Nitz H,Semke H,Landers R,Muelhaupt R.Reactive extrusion of polycaprolactone compounds containing wood flour and lignin[J].J.Appl.Polym.Sci.,2001,81:1972-1984
[10]	Feldman D,Banu D.Contribution to the study of rigid PVC polyblends with different lignins[J].J.Appl.Polym.Sci.,1997,66:1731-1744
[11]	Banu D,El-Aghoury A,Feldman D.Contributions to characterization of poly(vinyl chloride)-lignin blends[J].J.Appl.Polym.Sci.,2006,101:2732-2748
[12]	Dompas D,Groeninckx G.Toughening behaviour of rubber-modified thermoplastic polymers involving very small rubber particles(Ⅰ):A criterion for internal rubber cavitation[J].Polymer,1994,35:4743-4749
[13]	Liu Feiyue(刘飞跃),Xu Linli(许林利),Zheng Qiukai(郑秋闿),Xu Kai(许凯),Chen Mingcai(陈鸣才).Blends of PVC and lignin treated with emulsion of ethyl acrylate-maleic anhydride copolymer[J].CIESC Journal(化工学报),2009,60(9):2372-2376
[14]	Liu Feiyue,Xu Kai,Chen Mingcai,Cao Derong.The roles of polyacrylate in poly(vinyl chloride)-lignin composites[J].Polym.Compos.,2011,32(9):1399-1407
[15]	Jiang Tingda(蒋挺大).Lignin(木质素)[M].Beijing:Chemical Industry Press,2001:19-20
[16]	Starnes Jr W H.Structural and mechanistic aspects of the thermal degradation of poly(vinyl chloride)[J].Prog.Polym.Sci.,2002,27:2133-2170
[17]	Starnes Jr W H,Ge X.Mechanism of autocatalysis in the thermal dehydrochlorination of poly(vinyl chloride)[J].Macromolecules,2004,37:352-359
[18]	Radhakrishnan Nair M N,Thomas George V,Gopinathan Nair M R.Thermogravimetric analysis of PVC/ELNR blends[J].Polym.Degrad.Stab.,2007,92:189-196
[19]	Liu Qian,Wang Shurong,Zheng Yun,Luo Zhongyang,Cen Kefa.Mechanism study of wood lignin pyrolysis by using TG-FTIR analysis[J].J.Aanal.Appl.Pyrol.,2008,82(1):170-177
[20]	Sombatsompop N,Chaochanchaikul K.Effect of moisture content on mechanical properties,thermal and structural stability and extrudate texture of poly(vinyl chloride)/wood sawdust composites[J].Polym.Int.,2004,53:1210-1218
[21]	De Paoli M A,Furlan L T,Rodrigues M A.Lignin for reinforcing rubber[J].Química Nova,1983,6(7):121-122

EA-AA共聚物增容的PVC-木质素共混物的热稳定性

Thermal stability of PVC-lignin blends miscibilized by poly(ethyl acrylate-co-acrylic acid)

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 21

相关文章 15

编辑推荐

Metrics

本文评价

[1]	杨绍旗, 赵淑蘅, 陈伦刚, 王晨光, 胡建军, 周清, 马隆龙. Raney镍-质子型离子液体体系催化木质素平台分子加氢脱氧制备烷烃[J]. 化工学报, 2023, 74(9): 3697-3707.
[2]	李靖, 沈聪浩, 郭大亮, 李静, 沙力争, 童欣. 木质素基碳纤维复合材料在储能元件中的应用研究进展[J]. 化工学报, 2023, 74(6): 2322-2334.
[3]	刘润竹, 储甜甜, 张孝阿, 王成忠, 张军营. α，ω-端羟基亚苯基氟硅聚合物的合成及性能[J]. 化工学报, 2023, 74(3): 1360-1369.
[4]	钟磊, 邱学青, 张文礼. 木质素衍生炭在碱金属离子电池负极中的研究进展[J]. 化工学报, 2022, 73(8): 3369-3380.
[5]	黄丽菁, 黄继娇, 李鹏辉, 刘芷诺, 蒋康杰, 吴文娟. 木质素羟丙基磺甲基化改性及其对纤维素酶水解的影响[J]. 化工学报, 2022, 73(7): 3232-3239.
[6]	王江丽, 薛敏, 赵承科, 岳凤霞. 木质素分级对其应用性能的影响[J]. 化工学报, 2022, 73(5): 1894-1907.
[7]	王敏, 程金兰, 李鑫, 陆晶晶, 尹崇鑫, 戴红旗. 酸性助水溶剂脱除木质素机理分析[J]. 化工学报, 2022, 73(5): 2206-2221.
[8]	王欢, 符方宝, 李琼, 席跃宾, 杨东杰. 木质素碳纳米材料制备及在催化中的应用研究进展[J]. 化工学报, 2021, 72(9): 4445-4457.
[9]	范洪刚, 赵丹丹, 顾菁, 王亚琢, 袁浩然, 陈勇. 生物质三组分二元混合热解特性研究[J]. 化工学报, 2021, 72(7): 3788-3800.
[10]	高剑晨, 赵炳晨, 何峰, 李廷贤. 六水硝酸镁相变储热复合材料改性制备及储/放热性能研究[J]. 化工学报, 2021, 72(6): 3328-3337.
[11]	魏小兰, 谢佩, 王维龙, 陆建峰, 丁静. 含钙三元氯化物体系相图计算与熔盐热稳定性[J]. 化工学报, 2021, 72(6): 3074-3083.
[12]	李晓雪, 牛晓坡, 王庆法. 级孔Pt-Ni/ZSM-5对木质素衍生物加氢脱氧性能研究[J]. 化工学报, 2021, 72(5): 2626-2637.
[13]	王晶, 韩巧宁, 雷以廷, 唐曼, 陈丽红, 车俊达, 刘祖广. 一步法制备富氧木质素活性炭及其亚甲基蓝吸附性能[J]. 化工学报, 2021, 72(5): 2826-2836.
[14]	忻睦迪, 邢恩会. 三甲基膦和金属氧化物复合改性ZSM-5分子筛及其裂解性能研究[J]. 化工学报, 2021, 72(5): 2657-2668.
[15]	杜娟, 龚志强, 黄曹兴, 梁辰, 姚双全, 刘杨. 树脂吸附-超滤协同分离甘蔗渣碱法半纤维素[J]. 化工学报, 2021, 72(4): 2139-2147.