化工学报 ›› 2013, Vol. 64 ›› Issue (6): 2103-2108.DOI: 10.3969/j.issn.0438-1157.2013.06.028

• 催化、动力学与反应器 • 上一篇    下一篇

Cu-Cr2O3催化剂上二氟乙酸甲酯催化加氢合成二氟乙醇

曹晓雁1, 郑素贞1, 吴周安2, 王树华2, 周强2, 鲁继青1, 罗孟飞1   

  1. 1. 浙江师范大学物理化学研究所,先进催化材料教育部重点实验室,浙江 金华 321004;
    2. 浙江巨化集团技术中心, 浙江 衢州 324004
  • 收稿日期:2012-09-27 修回日期:2012-12-14 出版日期:2013-06-05 发布日期:2013-06-05
  • 通讯作者: 罗孟飞
  • 作者简介:曹晓雁(1985—),女,硕士研究生。
  • 基金资助:

    教育部"长江学者和创新团队发展计划"创新团队(IRT0980)。

Cu-Cr2O3 catalysts for hydrogenation of methyl difluoroacetate to 2,2-difluoroethanol

CAO Xiaoyan1, ZHENG Suzhen1, WU Zhouan2, WANG Shuhua2, ZHOU Qiang2, LU Jiqing1, LUO Mengfei1   

  1. 1. Key Laboratory of Ministry of Education for Advanced Catalysis Materials, Institute of Physical Chemistry, Zhejiang Normal University, Jinhua 321004, Zhejiang, China;
    2. Juhua Group Engineering Technology Research Center of National Fluoride Materials, Quzhou 324004, Zhejiang, China
  • Received:2012-09-27 Revised:2012-12-14 Online:2013-06-05 Published:2013-06-05

摘要: 采用共沉淀法制备了Cu-Cr2O3催化剂,考察了铜含量对Cu-Cr2O3催化剂的二氟乙酸甲酯加氢合成二氟乙醇性能的影响。运用X射线衍射(XRD)、程序升温还原(TPR)、BET和Raman光谱技术对该催化剂进行了表征。结果表明,还原态Cu-Cr2O3催化剂物相主要由Cu和Cr2O3组成,然而30Cu-Cr2O3和50Cu-Cr2O3催化剂存在少量CuCr2O4和CuCrO2复合氧化物。随着铜含量的增加,Cu-Cr2O3催化剂的二氟乙酸甲酯单程转化率呈现先上升后下降的趋势,而二氟乙醇选择性保持在70%左右; 30Cu-Cr2O3催化剂的二氟乙酸甲酯单程转化率达到最大值97%。Cu-Cr2O3催化剂的二氟乙酸甲酯加氢反应比速率随着铜含量的增加呈现增大的趋势,反应比速率的提高可能与催化剂中CuCr2O4和CuCrO2物种的存在有关。

关键词: 二氟乙酸甲酯, 加氢, 二氟乙醇, Cr2O3, Cu

Abstract: Cu-Cr2O3 catalysts were prepared by the coprecipitation method.The effect of Cu content on catalytic performance for hydrogenation of methyl difluoroacetate to 2,2-difluoroethanol was investigated.The catalysts were characterized with XRD, H2-TPR, BET and Raman techniques.The results showed that the reduced Cu-Cr2O3 catalysts contained mainly Cu and Cr2O3, while catalysts with a high Cu content (e.g.30 Cu-Cr2O3 and 50 Cu-Cr2O3) contained CuCr2O4 and CuCrO2 oxides.It was also found that with increasing Cu content, conversion of methyl difluoroacetate first increased and then slightly decreased and selectivity to 2,2-difluoroethanol was about 70%.The 30Cu-Cr2O3 catalyst exhibited the highest conversion of 97%.In addition, conversion of methyl difluoroacetate increased gradually in bi-component Cu-Cr2O3 catalysts with increasing Cu content, which was probably due to the presence of CuCr2O4 and CuCrO2 oxides.

Key words: methyl difluoroacetate, hydrogenation, 2,2-difluoroethanol, Cr2O3, Cu

中图分类号: