CO燃烧状况可调的催化裂化装置多稳态分析

doi:10.3969/j.issn.0438-1157.2013.08.033

化工学报 ›› 2013, Vol. 64 ›› Issue (8): 2930-2937.DOI: 10.3969/j.issn.0438-1157.2013.08.033

CO燃烧状况可调的催化裂化装置多稳态分析

王锐, 罗雄麟, 许锋

中国石油大学自动化研究所, 北京 102249

收稿日期:2012-12-26 修回日期:2013-03-25 出版日期:2013-08-05 发布日期:2013-08-05
通讯作者: 罗雄麟
作者简介:王锐(1985- ),男,博士研究生。
基金资助:
国家自然科学基金项目(21006127);国家重点基础研究发展计划项目(2012CB720500)。

Multiple steady states of FCCU with varying CO concentration

WANG Rui, LUO Xionglin, XU Feng

Research Institute of Automation, China University of Petroleum, Beijing 102249, China

Received:2012-12-26 Revised:2013-03-25 Online:2013-08-05 Published:2013-08-05
Supported by:
supported by the National Natural Science Foundation of China(21006127)and the National Basic Research Program of China(2012CB720500).

摘要/Abstract

摘要： 考虑到一氧化碳(CO)助燃剂作为调控系统CO燃烧状况的操作手段会影响催化裂化装置的多稳态,在已有的烧焦罐式高效再生催化裂化装置反应-再生系统动态机理模型的基础上,扩展了再生器内CO燃烧的机理模型,并将CO助燃剂的添加量与再生器内CO的燃烧状态进行定量的关联。在对再生器进行热量衡算的基础上,绘制出再生器的放出-移出热量曲线,确定了系统的3个稳态操作点,并根据放热反应器稳态热稳定性斜率条件分析了稳态点的热稳定性。针对炼厂CO助燃剂添加量设计较为保守的问题,分析了减少助燃剂添加量对系统操作的影响,指出CO助燃剂的添加量会影响到系统两个高温稳态点之间的操作空间从而影响到装置控制系统设计的苛刻度。

关键词: 催化裂化, 多稳态, 热稳定性, CO助燃剂

Abstract: An improved fluid catalytic cracking unit(FCCU)riser-regenerator model combined with carbon-monoxide(CO)combustion was proposed,since multiple steady states of FCCU would change as CO conversion changed with different amounts of CO combustion promoter added.Due to the conservative consumption of CO combustion promoter which contains Pt as the active component in refineries,the amount of the added combustion promoter would significantly affect the economics.Thus,based on the heat balance of the high-efficiency regenerator,heat generation and removal curves were determined and three steady states were found,two of which were thermally stable satisfying the slope condition.From the analysis of the influence of different amounts of CO promoter on the multiple steady states,it was pointed out that the varying distance between the two high steady states resulting from different amounts of CO combustion promoter added would influence the severity of the control system design.

Key words: FCCU, multiple steady states, thermal stability, CO combustion promoter

中图分类号:

TE624

王锐, 罗雄麟, 许锋. CO燃烧状况可调的催化裂化装置多稳态分析[J]. 化工学报, 2013, 64(8): 2930-2937.

WANG Rui, LUO Xionglin, XU Feng. Multiple steady states of FCCU with varying CO concentration[J]. CIESC Journal, 2013, 64(8): 2930-2937.

参考文献 20

[1]	Chester A W.CO combustion promoters:past and present//Ocelli M L.Fluid Catalytic Cracking (Ⅶ):Materials,Methods and Process Innovations[C].Amsterdam:Elsevier Science Bv,2007:67-77
[2]	Du Wei(杜伟),Huang Xingliang(黄星亮),Zheng Yanbin(郑彦彬).Present situation and development of CO combustion promotor[J].Petrochemical Technology(石油化工),2002,31(12):1022-1027
[3]	Li J,Luo G,Wei F.A multistage NOx reduction process for a FCC regenerator[J].Chemical Engineering Journal,2011,173(2):296-302
[4]	Avidan A,Shinnar R A.Development of catalytic cracking technology.A lesson in chemical reactor design[J].Industrial & Engineering Chemistry Research,1990,29(6):931-942
[5]	Zhao X,Peters A W,Weatherbee G W.Nitrogen chemistry and NOx control in a fluid catalytic cracking regenerator[J].Industrial & Engineering Chemistry Research,1997,36(11):4535-4542
[6]	Arbel A,Rinard I H,Shinnar R,et al.Dynamics and control of fluidized catalytic crackers(Ⅱ):Multiple steady states and instabilities[J].Industrial & Engineering Chemistry Research,1995,34(9):3014-3026
[7]	Hernandez-Barajas J R,Vazquez-Roman R,Salazar-Sotelo D.Multiplicity of steady states in FCC units:effect of operating conditions[J].Fuel,2006,85(5/6):849-859
[8]	Fernandes J L,Pinheiro C I C,Oliveira N M C,et al.Steady state multiplicity in an UOP FCC unit with high-efficiency regenerator[J].Chemical Engineering Science,2007,62(22):6308-6322
[9]	Luo Xionglin(罗雄麟).Dynamic modeling and operation analysis of FCCU with high efficiency regenerator.Beijing:University of Petroleum,China,1997
[10]	Luo Xionglin(罗雄麟),Yuan Pu(袁璞),Lin Shixiong(林世雄).Dynamic modeling of FCC unit(Ⅰ):Reactor section[J].Acta Petrolei Sinica:Petroleum Processing Section(石油学报:石油加工),1998,14(1):36-42
[11]	Luo Xionglin(罗雄麟),Yuan Pu(袁璞),Lin Shixiong(林世雄).Dynamic modeling of FCC unit(Ⅱ):Regenerator section[J].Acta Petrolei Sinica:Petroleum Processing Section(石油学报:石油加工),1998,14(2):64-68
[12]	Luo Xionglin(罗雄麟),Yuan Pu(袁璞),Lin Shixiong(林世雄).Dynamic modeling of FCC unit(Ⅲ):Catalyst transport system and pressure system[J].Acta Petrolei Sinica:Petroleum Processing Section(石油学报:石油加工),1998,14(3):36-40
[13]	Xu Chunming(徐春明),Lin Shixiong(林世雄),Yang Guanghua(杨光华).Determination of CO2/CO in dense bed during cracking catalyst regeneration[J].Journal of the University of Petroleum,China:Natural Science Edition(石油大学学报:自然科学版),1990,14(6):84-93
[14]	Cheng W C,Kim G,Peters A W,et al.Environmental fluid catalytic cracking technology[J].Catalysis Reviews,1998,40(1/2):39-79
[15]	Wei Fei(魏飞),Lin Shixiong(林世雄),Yang Guanghua(杨光华).Kinetic study of gas-phase CO slow oxidation[J].Journal of the University of Petroleum,China:Natural Science Edition(石油大学学报:自然科学版),1988,12(4/5):110-116
[16]	Liu Dazhuang(刘大壮),Sun Peiqin(孙培勤),Liu Xianfeng(刘现峰),et al.The activity determination of Pt/Al2O3 CO-promoted catalyst used in regenerator of catalytic cracking(Ⅰ):The kinetics of CO oxidation over new Pt/Al2O3 promoter[J].Chemical Engineering(China)(化学工程),1997,25(3):18-22
[17]	Liu Dazhuang(刘大壮),Liu Xianfeng(刘现峰),Wang Jiamin(王加民),et al.The activity determination of Pt/Al2O3 CO-promoted catalyst used in regenerator of catalytic cracking(Ⅱ):The determination and simulation of equilibrium activity[J].Chemical Engineering(China)(化学工程),1997,25(3):23-26
[18]	Chen Junwu(陈俊武).Catalytic Cracking Technology and Engineering(催化裂化工艺与工程)[M].2nd ed.Beijing:Sinopec Press,2005
[19]	Luo Xionglin(罗雄麟).Dynamic modeling and stability analysis of two-stage riser FCCU reactor/regenerator[J].Acta Petrolei Sinica:Petroleum Processing Section(石油学报:石油加工),2007, 23(4):54-62
[20]	Yuan Weikang(袁渭康),Zhu Kaihong(朱开宏).Chemical Reaction Engineering Analysis(化学反应工程分析)[M].Shanghai:East China University of Science and Technology Press,1995

CO燃烧状况可调的催化裂化装置多稳态分析

Multiple steady states of FCCU with varying CO concentration

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 20

相关文章 15

编辑推荐

Metrics

本文评价

[1]	刘润竹, 储甜甜, 张孝阿, 王成忠, 张军营. α，ω-端羟基亚苯基氟硅聚合物的合成及性能[J]. 化工学报, 2023, 74(3): 1360-1369.
[2]	熊昊, 梁潇予, 张晨曦, 白浩隆, 范晓宇, 魏飞. 重质油直接制化工品：多级逆流下行催化裂解技术[J]. 化工学报, 2023, 74(1): 86-104.
[3]	郝泽光, 张乾, 高增林, 张宏文, 彭泽宇, 杨凯, 梁丽彤, 黄伟. 生物质与催化裂化油浆共热解协同作用研究[J]. 化工学报, 2022, 73(9): 4070-4078.
[4]	陈昇, 王梦钶, 鲁波娜, 李秀峰, 刘岑凡, 刘梦溪, 范怡平, 卢春喜. 原料油汽化特性对催化裂化反应结焦过程影响的CFD模拟[J]. 化工学报, 2022, 73(7): 2982-2995.
[5]	石孝刚, 王成秀, 高金森, 蓝兴英. 提升管反应器介尺度结构影响规律的数值模拟研究[J]. 化工学报, 2022, 73(6): 2708-2721.
[6]	潘多涛, 王旭东, 史洪岩, 修志龙. 生物基1， 3-丙二醇连续发酵过程的稳态分析与反馈控制[J]. 化工学报, 2022, 73(5): 2094-2100.
[7]	曹森山, 许锋, 罗雄麟. 基于稳定性的循环物流系统流程模拟——以催化裂化反应-再生系统为例[J]. 化工学报, 2022, 73(3): 1256-1269.
[8]	张建飞, 林嘉奖, 罗雄麟, 许锋. 重油催化裂化装置产品分布调控与优化模拟分析[J]. 化工学报, 2022, 73(3): 1232-1245.
[9]	张兴硕, 罗雄麟, 许锋. 催化裂化装置反再系统动态模拟精细化与控制系统“工艺优先”配对设计[J]. 化工学报, 2022, 73(2): 747-758.
[10]	许峻, 王智峰, 侯凯军, 高永福, 范怡平, 卢春喜. 双层喷嘴进料提升管内气固流动混合特性的大型冷模实验研究[J]. 化工学报, 2021, 72(8): 4019-4029.
[11]	魏小兰, 谢佩, 王维龙, 陆建峰, 丁静. 含钙三元氯化物体系相图计算与熔盐热稳定性[J]. 化工学报, 2021, 72(6): 3074-3083.
[12]	高剑晨, 赵炳晨, 何峰, 李廷贤. 六水硝酸镁相变储热复合材料改性制备及储/放热性能研究[J]. 化工学报, 2021, 72(6): 3328-3337.
[13]	忻睦迪, 邢恩会. 三甲基膦和金属氧化物复合改性ZSM-5分子筛及其裂解性能研究[J]. 化工学报, 2021, 72(5): 2657-2668.
[14]	魏彬, 周鑫, 王耀伟, 郭振莲, 陈小博, 刘熠斌, 杨朝合. 基于改进NSGA-Ⅱ算法的FCC分离系统多目标优化[J]. 化工学报, 2021, 72(5): 2735-2744.
[15]	张锐, 邵琦, 张华宇, 金泽龙, 张小亮. 硼掺杂二氧化硅杂化膜的制备及渗透汽化脱盐性能[J]. 化工学报, 2021, 72(4): 2317-2327.