智能工厂可配置的多层次建模方法

doi:10.3969/j.issn.0438-1157.2013.12.013

化工学报 ›› 2013, Vol. 64 ›› Issue (12): 4354-4365.DOI: 10.3969/j.issn.0438-1157.2013.12.013

智能工厂可配置的多层次建模方法

齐瑞超, 荣冈, 冯毅萍, 胡云苹

浙江大学智能系统与控制研究所, 浙江杭州 310027

收稿日期:2013-08-12 修回日期:2013-08-29 出版日期:2013-12-05 发布日期:2013-12-05
通讯作者: 荣冈
作者简介:齐瑞超（1989- ），男，硕士研究生。
基金资助:
国家高技术研究发展计划项目（2012AA041102）；国家科技支撑计划课题（2012BAE05B00）。

Configurable hierarchical modeling method for intelligent plant

QI Ruichao, RONG Gang, FENG Yiping, HU Yunping

Institute of Cyber Systems and Control, Zhejiang University, Hangzhou 310027, Zhejiang, China

Received:2013-08-12 Revised:2013-08-29 Online:2013-12-05 Published:2013-12-05
Supported by:
supported by the High-tech Research and Development Program of China (2012AA041102) and the National Key Technology R&D Program of China (2012BAE05B00).

摘要/Abstract

摘要： 工厂仿真模型通常被分为宏观和微观两类，宏观的仿真模型如ERP层模型，微观的仿真模型如PCS层模型，MES层模型介于宏观和微观之间。前人研究中建立某一层次的仿真模型通常都有重用率低和扩展性差的问题，为此提出一个用于工厂建模和仿真的四层框架：模型实体结构/模型库层、模型抽象层、工厂模型层、智能工厂仿真系统层。运用这种对工厂拓扑网络进行抽象的建模与仿真方法可以构建可扩展和易配置的仿真模型。本文使用此方法建立了智能工厂多层次仿真系统，最后通过3个案例说明方法的有效性和可靠性，为工厂建模和仿真提供了指导。

关键词: 智能工厂, 建模方法, 算法, 计算机模拟, 模型

Abstract: Traditionally,plant simulation model is classified as macroscopic or microscopic. An ERP-level model and a PCS-level model belong to macro and micro simulation model respectively while an MES-level model lies in-between.Simulation models of certain level established by former researchers usually have low reusability and poor scalability.To this end,a novel four-layered approach,which is composed of model entity structure/model base,model abstraction,plant modeling and IPS simulation systems layer,has been proposed for plant modeling and simulation.Configurable and reusable simulation model can be easily obtained by adopting the abstraction modeling and simulation method with respect to plant network. In this article,a multi-level intelligent plant simulation system is constructed with the aforementioned method and the effectiveness and reliability are verified through case studies.Therefore,it is expected to be widely used in plant modeling and simulation in practice.

Key words: intelligent plant, modeling method, algorithm, computer simulation, model

中图分类号:

齐瑞超, 荣冈, 冯毅萍, 胡云苹. 智能工厂可配置的多层次建模方法[J]. 化工学报, 2013, 64(12): 4354-4365.

QI Ruichao, RONG Gang, FENG Yiping, HU Yunping. Configurable hierarchical modeling method for intelligent plant[J]. CIESC Journal, 2013, 64(12): 4354-4365.

参考文献 22

[1]	Luo C, Rong G. Hierarchical approach for short-term scheduling in refineries[J].Industrial & Engineering Chemistry Research, 2007, 46 (11):3656-3668
[2]	Wang J, Rong G. Robust optimization model for crude oil scheduling under uncertainty[J].Industrial & Engineering Chemistry Research, 2009, 49 (4):1737-1748
[3]	Pitty S S, et al.Decision support for integrated refinery supply chains (1):Dynamic simulation[J].Computers & Chemical Engineering, 2008, 32 (11):2767-2786
[4]	Koo L Y, et al.Decision support for integrated refinery supply chains (2):Design and operation[J].Computers & Chemical Engineering, 2008, 32 (11):2787-2800
[5]	Proctor F.Smart Manufacturing and Construction Control Systems[EB/OL].
	[2011].http://www.nist.gov/el/isd/cs/upload/SMCSprogram2013.pdf
[6]	Grossmann I. Enterprise-wide optimization:a new frontier in process systems engineering[J].AIChE Journal, 2005, 51 (7):1846-1857
[7]	Coalition S M L.Implementing 21st century smart manufacturing:Workshop Report, SMLC and US DOE[R].2011
[8]	Scholten B. The Road to Integration:A Guide to Applying the ISA-95 Standard in Manufacturing[M].Isa, 2007
[9]	Bonczek R H, Holsapple C W, Whinston A B. The evolving roles of models in decision support systems[J].Decision Sciences, 1980, 11 (2):337-356
[10]	Michaloski J, et al.Manufacturing Modeling and Simulation[EB/OL].
	[2011].http://www.nist.gov/el/isd/cs/manmodsim. cfm
[11]	Goodrich R, Yeh J, Chukman G. Increase product value through process modeling[J].Hydrocarbon Processing, 2006, 85 (6):83-88
[12]	Yang Jiali (杨佳丽), Rong Gang (荣冈).Refinery planning optimization integrated with quality tracking and constraints[J].CIESC Journal (化工学报), 2010, 61 (1):124-131
[13]	Herrmann C, Thiede S, Kara S, et al.Energy oriented simulation of manufacturing systems—concept and application[J].CIRP Annals-Manufacturing Technology, 2011, 60 (1):45-48
[14]	Zhou Z W, Feng Y P, Rong G, et al.Virtual reality based process integrated simulation platform in refinery:virtual refinery and its application[J].China Petroleum Processing and Petrochemical Technology, 2011, 13 (3):74-84
[15]	Schwarz P. Simulation of systems with dynamically varying model structure[J].Mathematics and Computers in Simulation, 2008, 79 (4):850-863
[16]	Pei Ruiling (裴瑞凌), Rong Gang (荣冈).Flowsheet simulation platform of intelligent plant in oil refinery[J].Control and Instruments in Chemical Industry (化工自动化及仪表), 2005, 32 (2):43-46
[17]	Zheng Liyu (郑丽钰), Rong Gang (荣冈), Wu Jie (吴婕).Scheduling-event driven modeling and simulation of material flow process for petrochemical industries[J].Control and Instruments in Chemical Industry (化工自动化及仪表), 2008, 35 (4):11-15
[18]	Lee J K, Lim Y H, Chi S D. Hierarchical modeling and simulation environment for intelligent transportation systems[J].Simulation, 2004, 80 (2):61-76
[19]	Li Jianlie (李笕列). Research on model and data management in process industry[D].Hangzhou:Zhejiang University, 2009
[20]	Hu Y, Feng Y, Rong G.Model management for refinery multi-level simulation and optimization//World Congress[C].2011
[21]	Zeigler B P, Praehofer H, Kim T G. Theory of Modeling and Simulation:Integrating Discrete Event and Continuous Complex Dynamic Systems[M].Academic Press, 2000
[22]	Neiro S M S, Pinto J M. A general modeling framework for the operational planning of petroleum supply chains[J].Computers & Chemical Engineering, 2004, 28 (6/7):871-896

智能工厂可配置的多层次建模方法

Configurable hierarchical modeling method for intelligent plant

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 22

相关文章 15

编辑推荐

Metrics

本文评价

[1]	宋嘉豪, 王文. 斯特林发动机与高温热管耦合运行特性研究[J]. 化工学报, 2023, 74(S1): 287-294.
[2]	连梦雅, 谈莹莹, 王林, 陈枫, 曹艺飞. 地下水预热新风一体化热泵空调系统制热性能研究[J]. 化工学报, 2023, 74(S1): 311-319.
[3]	金正浩, 封立杰, 李舒宏. 氨水溶液交叉型再吸收式热泵的能量及分析[J]. 化工学报, 2023, 74(S1): 53-63.
[4]	王浩, 王振雷. 基于自适应谱方法的裂解炉烧焦模型化简策略[J]. 化工学报, 2023, 74(9): 3855-3864.
[5]	陈哲文, 魏俊杰, 张玉明. 超临界水煤气化耦合SOFC发电系统集成及其能量转化机制[J]. 化工学报, 2023, 74(9): 3888-3902.
[6]	曹跃, 余冲, 李智, 杨明磊. 工业数据驱动的加氢裂化装置多工况切换过渡状态检测[J]. 化工学报, 2023, 74(9): 3841-3854.
[7]	李科, 文键, 忻碧平. 耦合蒸气冷却屏的真空多层绝热结构对液氢储罐自增压过程的影响机制研究[J]. 化工学报, 2023, 74(9): 3786-3796.
[8]	刘远超, 关斌, 钟建斌, 徐一帆, 蒋旭浩, 李耑. 单层XSe₂（X=Zr/Hf）的热电输运特性研究[J]. 化工学报, 2023, 74(9): 3968-3978.
[9]	于旭东, 李琪, 陈念粗, 杜理, 任思颖, 曾英. 三元体系KCl + CaCl₂ + H₂O 298.2、323.2及348.2 K相平衡研究及计算[J]. 化工学报, 2023, 74(8): 3256-3265.
[10]	诸程瑛, 王振雷. 基于改进深度强化学习的乙烯裂解炉操作优化[J]. 化工学报, 2023, 74(8): 3429-3437.
[11]	闫琳琦, 王振雷. 基于STA-BiLSTM-LightGBM组合模型的多步预测软测量建模[J]. 化工学报, 2023, 74(8): 3407-3418.
[12]	尹刚, 李伊惠, 何飞, 曹文琦, 王民, 颜非亚, 向禹, 卢剑, 罗斌, 卢润廷. 基于KPCA和SVM的铝电解槽漏槽事故预警方法[J]. 化工学报, 2023, 74(8): 3419-3428.
[13]	李锦潼, 邱顺, 孙文寿. 煤浆法烟气脱硫中草酸和紫外线强化煤砷浸出过程[J]. 化工学报, 2023, 74(8): 3522-3532.
[14]	郭雨莹, 敬加强, 黄婉妮, 张平, 孙杰, 朱宇, 冯君炫, 陆洪江. 稠油管道水润滑减阻及压降预测模型修正[J]. 化工学报, 2023, 74(7): 2898-2907.
[15]	刘春雨, 周桓宇, 马跃, 岳长涛. CaO调质含油污泥干燥特性及数学模型[J]. 化工学报, 2023, 74(7): 3018-3027.