螺旋输送器中颗粒混合过程的模拟

doi:10.11949/j.issn.0438-1157.20171196

化工学报 ›› 2018, Vol. 69 ›› Issue (1): 371-380.DOI: 10.11949/j.issn.0438-1157.20171196

螺旋输送器中颗粒混合过程的模拟

戚华彪¹, 徐骥¹, 宋文立¹, 葛蔚^1,2

1 中国科学院过程工程研究所多相复杂系统国家重点实验室, 北京 100190;
2 中国科学院大学化学化工学院, 北京 100049

收稿日期:2017-08-30 修回日期:2017-10-20 出版日期:2018-01-05 发布日期:2018-01-05
通讯作者: 葛蔚
基金资助:
中国科学院战略性先导科技专项（XDA07080000）；国家自然科学基金项目（91434201）；中国科学院前沿科学重点研究项目（QYZDJ-SSW-JSC029）；中国科学院科技创新交叉与合作团队。

Simulation on mixing granular materials in screw conveyor

QI Huabiao¹, XU Ji¹, SONG Wenli¹, GE Wei^1,2

1 State Key Laboratory of Multiphase Complex Systems, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190, China;
2 School of Chemistry and Chemical Engineering, University of Chinese Academy of Sciences, Beijing 100049, China

Received:2017-08-30 Revised:2017-10-20 Online:2018-01-05 Published:2018-01-05
Contact: 10.11949/j.issn.0438-1157.20171196
Supported by:
supported by the "Strategic Priority Research Program" of the Chinese Academy of Sciences (XDA07080000), the National Natural Science Foundation of China (91434201), the Key Research Program of Frontier Science, CAS (QYZDJ-SSW-JSC029) and the CAS Interdisciplinary Innovation Team.

摘要/Abstract

摘要：

采用离散单元法（discrete element method，DEM）模拟了工业尺度螺旋输送器中两种不同密度与粒径的颗粒的流动状态与混合过程。采用Lacey混合指标的定量分析表明，该输送器的混合性能强烈地依赖于操作条件和结构尺寸，转速和物料的添加速率对混合效果影响最大，其次是混合段螺距和物料粒径。根据工业生产的具体要求，可参考上述发现合理地选择技术参数、提高混合效率、降低能耗。

关键词: 颗粒, 离散单元法, 螺旋输送器, 混合机理, 大规模模拟

Abstract:

Flowing and mixing granular materials of two different sizes and densities in an industrial-scale screw conveyor was studied by computer simulation using the discrete element method(DEM). Quantitative analysis results by the Lacey mixing index showed that mixing performance of the screw conveyor was dependent strongly on operational conditions and structural dimensions. Both screw rotating speed and material feeding rate had dominant effects on mixing efficiency, followed by granular material sizes and screw pitch in the mixing region. To reduce energy consumption and improve mixing performance in production, reasonable operation parameters of screw conveyors could be selected according to these findings.

Key words: granular material, discrete element method, screw conveyor, mixing mechanism, large-scale simulation

中图分类号:

TQ536.9

戚华彪, 徐骥, 宋文立, 葛蔚. 螺旋输送器中颗粒混合过程的模拟[J]. 化工学报, 2018, 69(1): 371-380.

QI Huabiao, XU Ji, SONG Wenli, GE Wei. Simulation on mixing granular materials in screw conveyor[J]. CIESC Journal, 2018, 69(1): 371-380.

参考文献 30

[1]	陈汝超, 陈晓平, 蔡佳莹, 等. 粒煤螺旋输送特性实验研究[J]. 煤炭学报, 2012, 37(1):154-157. CHEN R C, CHEN X P, CAI J Y, et al. Screw conveying characteristics of granular coal from screw conveyor[J]. Journal of China Coal Society, 2012, 37(1):154-157.
[2]	屈少敏. 一种散粮螺旋输送机螺旋体的优化设计[J]. 西部粮油科技, 2000, 25(4):13-15. QU S M. An optimal design of the screw in a screw conveyor for transport grain[J]. Grain Processing, 2000, 25(4):13-15.
[3]	范建平. 螺旋气力取料装置分离机理研究[D]. 武汉:武汉理工大学, 2008. FAN J P. Study on the separation mechanism of screw-pneumatic reclaimer[D]. Wuhan:Wuhan University of Technology, 2008.
[4]	张杰, 高铁瑜, 渠亚东, 等. 微细微量螺旋加料器的试验研究[J]. 热能动力工程, 2004, 19(3):278-280. ZHANG J, GAO T Y, QU Y D, et al. The experimental study of microscale screw feeder[J]. Journal of Engineering for Thermal Energy and Power, 2004, 19(3):278-280.
[5]	师红梅. 螺旋输送机在制粉工艺上的改进[J]. 现代机械, 2006, 6:87-90. SHI H M. Improvement of the screw conveyor in the powder process[J]. Modern Machinery, 2006, 6:87-90.
[6]	江继辉. 混凝土搅拌输送车搅拌筒搅拌过程的运动分析[J]. 工程机械, 1991, 2:28-30. JIANG J H. The motion analysis of the mixing process of the concrete in a screw conveyor[J]. Construction Machinery and Equipment, 1991, 2:28-30.
[7]	仝晓波, 申春梅, 吴少华, 等. 煤拔头半焦燃烧特性[J]. 过程工程学报, 2009, 9(5):897-903. TONG X B, SHEN C M, WU S H, et al. Combustion characteristics of char from coal topping process[J]. The Chinese Journal of Process Engineering, 2009, 9(5):897-903.
[8]	王杰广, 吕雪松, 姚建中, 等. 下行床煤拔头工艺的产品产率分布和液体组成[J]. 过程工程学报, 2005, 5(3):241-245. Wang J G, LÜ X S, YAO J Z, et al. Total distribution and liquid composition of products from coal topping process in a downer reactor[J]. The Chinese Journal of Process Engineering, 2005, 5(3):241-245.
[9]	申春梅, 吴少华, 林伟刚,等. 煤拔头中低温快速热解烟煤半焦的孔隙结构[J]. 过程工程学报, 2010, 10(3):522-529. SHEN C M, WU S H, LIN W G, et al. Pore structure of low temperature and fast pyrolysis bituminous semi-char from coal topping process[J]. The Chinese Journal of Process Engineering, 2010, 10(3):522-529.
[10]	申春梅, 吴少华, 林伟刚,等. 煤拔头烟煤焦的物质组成及碳结构[J]. 热能动力工程, 2011, 26(1):100-104. SHEN C M, WU S H, LIN W G, et al. The material composition and carbon structure of bituminous char from coal topping process[J]. Journal of Engineering for Thermal Energy and Power, 2011, 26(1):100-104.
[11]	纪文峰, 董利, 汪印, 等. 循环流化床煤热解拔头工艺循环颗粒流分配[J]. 过程工程学报, 2010, 10(2):215-220. JI W F, DONG L, WANG Y, et al. Circulating granular flow partition in pyrolytic topping of coal with a circulating fluidized bed[J]. The Chinese Journal of Process Engineering, 2010, 10(2):215-220.
[12]	CUNDALL P A, STRACK O D L. A discrete numerical model for granular assemblies[J]. Geotechnique, 1979, 29(1):47-65.
[13]	SHIMIZU Y, CUNDALL P A. Three-dimensional DEM simulations of bulk handling by screw conveyors[J]. Journal of Engineering Mechanics, 2001, 127(9):864-872.
[14]	OWEN P J, CLEARY P W. Prediction of screw conveyor performance using the discrete element method (DEM)[J]. Powder Technology, 2009, 193(3):274-288.
[15]	HASTIE D B, WYPYCH P. Experimental validation of particle flow through conveyor transfer hoods via continuum and discrete element methods[J]. Mechanics of Materials, 2010, 42(4):383-394.
[16]	李海燕. 基于EDEM的垂直螺旋输送机性能参数仿真研究[D]. 太原:太原科技大学, 2011. LI H Y. Simulation study of performance parameters of a vertical screw conveyor based on EDEM[D]. Taiyuan:Taiyuan University of Science and Technology, 2011.
[17]	SARKAR A, WASSGREN C R. Comparison of flow microdynamics for a continuous granular mixer with predictions from periodic slice DEM simulations[J]. Powder Technology, 2012, 221:325-336.
[18]	GAO Y, MUZZIO F J, IERAPETRITOU M G. Optimizing continuous powder mixing processes using periodic section modeling[J]. Chemical Engineering Science, 2012, 80:70-80.
[19]	冷冰冰. 基于Fluent的螺旋输送机输送机理初步研究[D]. 太原:太原科技大学, 2007. LENG B B. A preliminary study on conveying mechanism of screw conveyor based on Fluent[D]. Taiyuan:Taiyuan University of Science and Technology, 2007.
[20]	XU J, GE W, LI J H. DEMMS V3.0:2014SRBJ0786[P]. 2014-12-19.
[21]	REN X X, XU J, QI H B, et al. GPU-based discrete element simulation on a tote blender for performance improvement[J]. Powder Technology, 2013, 239:348-357.
[22]	REN X X, ZHOU G Z, XU J, et al. Numerical analysis of enhanced mixing in a Gallay tote blender[J]. Particuology, 2016, 29(6):95-102.
[23]	YU F H, ZHOU G Z, XU J, et al. Enhanced axial mixing of rotating drums with alternately arranged baffles[J]. Powder Technology, 2015, 286:276-287.
[24]	戚华彪. 基于GPU的离散模拟在颗粒流动与混合机理研究中的应用[D]. 北京:中国科学院大学, 2014. QI H B. Application of GPU-based discrete simulation to the study of flow and mixing mechanisms of granular materials[D]. Beijing:University of Chinese Academy of Sciences, 2014.
[25]	韩健. 煤灰颗粒与平板表面冷态惯性撞击机理研究[D]. 大连:大连理工大学, 2013. HAN J. Mechanism research on inertial impact process between ash particle and planar surface at normal temperature state[D]. Dalian:Dalian University of Technology, 2013.
[26]	黄中伟, 李根生, 王开龙, 等. 基于离散单元法的筛管内煤灰颗粒通过性分析[J]. 煤炭学报, 2012, 37(12):2083-2086. HUANG Z W, LI G S, WANG K L, et al. Analysis of coal particles passing slotted screen based on discrete element method[J]. Journal of China Coal Society, 2012, 37(12):2083-2086.
[27]	DONG K J, YU A B, BRAKE I. DEM simulation of particle flow on a multi-deck banana screen[J]. Minerals Engineering, 2009, 22(11):910-920.
[28]	TANAKA K, NISHIDA M, KUNIMOCHI T, et al. Discrete element simulation and experiment for dynamic response of two-dimensional granular matter to the impact of a spherical projectile[J]. Powder Technology, 2002, 124:160-173.
[29]	CHEN H, XIAO Y, LIU Y, et al. Effect of Young's modulus on DEM results regarding transverse mixing of particles within a rotating drum[J]. Powder Technology. 2017, 318:507-517.
[30]	LACEY P M C. Developments in the theory of particle mixing[J]. Journal of Applied Chemistry, 1954, 4(5):257-268.

螺旋输送器中颗粒混合过程的模拟

Simulation on mixing granular materials in screw conveyor

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 30

相关文章 15

编辑推荐

Metrics

本文评价

[1]	曾如宾, 沈中杰, 梁钦锋, 许建良, 代正华, 刘海峰. 基于分子动力学模拟的Fe₂O₃纳米颗粒烧结机制研究[J]. 化工学报, 2023, 74(8): 3353-3365.
[2]	郑玉圆, 葛志伟, 韩翔宇, 王亮, 陈海生. 中高温钙基材料热化学储热的研究进展与展望[J]. 化工学报, 2023, 74(8): 3171-3192.
[3]	张孟斌, 李锐, 张嘉杰, 马素霞, 张建胜. 基于共面电容原理的煤炭灰渣介电特性实验研究[J]. 化工学报, 2023, 74(7): 3028-3037.
[4]	陈巨辉, 张谦, 舒崚峰, 李丹, 徐鑫, 刘晓刚, 赵晨希, 曹希峰. 基于DEM方法的旋转流化床纳米颗粒流动特性研究[J]. 化工学报, 2023, 74(6): 2374-2381.
[5]	时国华, 何林珅, 赵玺灵, 张世钢. 余热回收喷淋塔的烟气颗粒物脱除特性研究[J]. 化工学报, 2023, 74(4): 1735-1745.
[6]	陈俊先, 姬忠礼, 赵瑜, 张倩, 周岩, 刘猛, 刘震. 基于微波技术的天然气管道内颗粒物在线检测方法研究[J]. 化工学报, 2023, 74(3): 1042-1053.
[7]	贾龙菲, 付少童, 向星, 张华海, 张弢, 王利民. 颗粒振动影响动量传递过程的格子Boltzmann方法模拟[J]. 化工学报, 2023, 74(2): 735-747.
[8]	艾承燚, 乔金硕, 王振华, 孙旺, 孙克宁. 原位析出纳米合金的PrBaFe₂O_6-_δ 基阳极构筑及其在固体碳燃料电池中的应用研究[J]. 化工学报, 2022, 73(8): 3708-3719.
[9]	李亚芾, 付亮亮, 白浩隆, 白丁荣, 许光文. 菱镁矿浮选尾矿直接合成同时制备镁橄榄石和镁砂研究[J]. 化工学报, 2022, 73(8): 3679-3687.
[10]	赵庆杰, 胡晓红, 张超, 凡凤仙. 蒸汽在含有不可溶核和可溶无机盐的细颗粒物表面的核化特性[J]. 化工学报, 2022, 73(7): 3251-3261.
[11]	杨晖, 李宏泽, 陈泉, 郑泽希, 李然, 孙其诚. 从质量流向漏斗流转变过程中的动力学分析[J]. 化工学报, 2022, 73(6): 2722-2731.
[12]	孔令菲, 陈延佩, 王维. 气固流态化中颗粒介尺度结构的动力学研究[J]. 化工学报, 2022, 73(6): 2486-2495.
[13]	陈泉, 郑泽希, 李然, 孙其诚, 杨晖. 散斑能见度光谱法测量筒仓内颗粒流的颗粒温度[J]. 化工学报, 2022, 73(6): 2603-2611.
[14]	唐天琪, 何玉荣. 磁场对湿颗粒流化床系统中介尺度结构影响机制研究[J]. 化工学报, 2022, 73(6): 2636-2648.
[15]	牛犁, 刘梦溪, 王海北. 密相流化床中介尺度流动结构的流体力学特性研究[J]. 化工学报, 2022, 73(6): 2622-2635.