二次电池中金属锂负极沉脱机理研究进展

doi:10.11949/0438-1157.20211242

摘要/Abstract

摘要：

金属锂负极是下一代高比能二次电池备受关注的负极材料，以金属锂为负极的锂金属电池具备极高的理论能量密度，但其仍存在充放电循环效率低、电池寿命短等问题。要实现高能量密度高安全性的锂金属电池的合理设计和优化，需要对金属锂负极中锂金属沉积脱出过程的离子输运、电子输运、界面反应等机制机理有清晰的认识。本文针对金属锂负极中存在的枝晶生长、死锂形成、固体电解质界面膜作用等机理问题，综述了研究者们在其沉脱机理的模型与理论计算、实验研究等方面做出的诸多研究进展，为锂金属电池的合理设计提供了更全面的机理认识。

关键词: 电化学, 枝晶生长, 相场理论, 锂金属电池, 金属锂负极

Abstract:

Lithium metal is one of the most promising materials for the next generation secondary batteries. Lithium metal batteries possess an extremely high theoretical energy density, but still face many challenges, such as low Coulombic efficiency and short battery lifespan. In order to realize the reasonable design and optimization of lithium metal battery with high energy density and high safety, it is necessary to have a clear understanding on the mechanisms of ion transport, electron transport, interface reaction and so on. Recently, aiming at the mechanism of dendrite growth, dead lithium formation and solid electrolyte interphase in lithium metal anode, researchers have made many progress in the mechanism research with theoretical calculations and experiments, providing a more comprehensive mechanism understanding for the rational design of lithium metal battery.

Key words: electrochemistry, dendrite growth, phase field theory, lithium metal batteries, lithium metal anodes

中图分类号:

TM 912

张睿, 沈馨, 袁洪, 程新兵, 黄佳琦, 张强. 二次电池中金属锂负极沉脱机理研究进展[J]. 化工学报, 2021, 72(12): 6144-6160.

Rui ZHANG, Xin SHEN, Hong YUAN, Xinbing CHENG, Jiaqi HUANG, Qiang ZHANG. Recent progress on lithium plating/stripping mechanisms in lithium metal batteries[J]. CIESC Journal, 2021, 72(12): 6144-6160.

图/表 15

参考文献 207

1	Armand M, Tarascon J M. Building better batteries[J]. Nature, 2008, 451(7179): 652-657.
2	Tarascon J M, Armand M. Issues and challenges facing rechargeable lithium batteries[J]. Nature, 2001, 414(6861): 359-367.
3	Bruce P G, Freunberger S A, Hardwick L J, et al. Li-O₂ and Li-S batteries with high energy storage[J]. Nature Materials, 2012, 11(1): 19-29.
4	Cheng X B, Zhang R, Zhao C Z, et al. Toward safe lithium metal anode in rechargeable batteries: a review[J]. Chemical Reviews, 2017, 117(15): 10403-10473.
5	Liu J, Bao Z N, Cui Y, et al. Pathways for practical high-energy long-cycling lithium metal batteries[J]. Nature Energy, 2019, 4(3): 180-186.
6	Chen X R, Zhao B C, Yan C, et al. Review on Li deposition in working batteries: from nucleation to early growth[J]. Advanced Materials, 2021, 33(8): 2004128.
7	Cheng X B, Liu H, Yuan H, et al. A perspective on sustainable energy materials for lithium batteries[J]. SusMat, 2021, 1(1): 38-50.
8	Wang R H, Cui W S, Chu F L, et al. Lithium metal anodes: present and future[J]. Journal of Energy Chemistry, 2020, 48: 145-159.
9	Chen X, Li H R, Shen X, et al. The origin of the reduced reductive stability of ion-solvent complexes on alkali and alkaline earth metal anodes[J]. Angewandte Chemie International Edition, 2018, 57(51): 16643-16647.
10	Zhang X Q, Jin Q, Nan Y L, et al. Electrolyte structure of lithium polysulfides with anti-reductive solvent shells for practical lithium-sulfur batteries[J]. Angewandte Chemie International Edition, 2021, 60(28): 15503-15509.
11	Wan C, Xu S, Hu M Y, et al. Multinuclear NMR study of the solid electrolyte interface formed in lithium metal batteries[J]. ACS Applied Materials & Interfaces, 2017, 9(17): 14741-14748.
12	Vaughey J T, Liu G, Zhang J G. Stabilizing the surface of lithium metal[J]. MRS Bulletin, 2014, 39(5): 429-435.
13	Li Y, Li Y, Pei A, et al. Atomic structure of sensitive battery materials and interfaces revealed by cryo-electron microscopy[J]. Science, 2017, 358(6362): 506-510.
14	Wang A P, Kadam S, Li H, et al. Review on modeling of the anode solid electrolyte interphase (SEI) for lithium-ion batteries[J]. Npj Computational Materials, 2018, 4: 15.
15	Yang Y, Yan C, Huang J Q. Research progress of solid electrolyte interphase in lithium batteries[J]. Acta Physico Chimica Sinica, 2021, 37(11): 2010076.
16	Yu X W, Manthiram A. Electrode-electrolyte interfaces in lithium-based batteries[J]. Energy & Environmental Science, 2018, 11(3): 527-543.
17	Li Y Z, Huang W, Li Y B, et al. Correlating structure and function of battery interphases at atomic resolution using cryoelectron microscopy[J]. Joule, 2018, 2(10): 2167-2177.
18	Shi S, Lu P, Liu Z, et al. Direct calculation of Li-ion transport in the solid electrolyte interphase[J]. Journal of the American Chemical Society, 2012, 134(37): 15476-15487.
19	Peled E, Golodnitsky D, Ardel G. Advanced model for solid electrolyte interphase electrodes in liquid and polymer electrolytes[J]. Journal of the Electrochemical Society, 1997, 144(8): L208-L210.
20	Yan C, Cheng X B, Yao Y X, et al. An armored mixed conductor interphase on a dendrite-free lithium-metal anode[J]. Advanced Materials, 2018, 30(45): 1804461.
21	Xu R, Shen X, Ma X X, et al. Identifying the critical anion-cation coordination to regulate the electric double layer for an efficient lithium-metal anode interface[J]. Angewandte Chemie International Edition, 2021, 60(8): 4215-4220.
22	He Y, Ren X D, Xu Y B, et al. Origin of lithium whisker formation and growth under stress[J]. Nature Nanotechnology, 2019, 14(11): 1042-1047.
23	Zachman M J, Tu Z Y, Choudhury S, et al. Cryo-STEM mapping of solid-liquid interfaces and dendrites in lithium-metal batteries[J]. Nature, 2018, 560(7718): 345-349.
24	Biswal P, Stalin S, Kludze A, et al. Nucleation and early stage growth of Li electrodeposits[J]. Nano Letters, 2019, 19(11): 8191-8200.
25	Sun X W, Zhang X Y, Ma Q T, et al. Revisiting the electroplating process for lithium-metal anodes for lithium-metal batteries[J]. Angewandte Chemie International Edition, 2020, 59(17): 6665-6674.
26	Shen C, Hu G H, Cheong L Z, et al. Direct observation of the growth of lithium dendrites on graphite anodes by operando EC-AFM[J]. Small Methods, 2018, 2(2): 1700298.
27	Li L, Li S, Lu Y. Suppression of dendritic lithium growth in lithium metal-based batteries[J]. Chemical Communications, 2018, 54(50): 6648-6661.
28	Liu H, Cheng X B, Jin Z H, et al. Recent advances in understanding dendrite growth on alkali metal anodes[J]. EnergyChem, 2019, 1(1): 100003.
29	Pu K C, Zhang X, Qu X L, et al. Recently developed strategies to restrain dendrite growth of Li metal anodes for rechargeable batteries[J]. Rare Metals, 2020, 39(6): 616-635.
30	沈馨, 张睿, 程新兵, 等. 锂枝晶的原位观测及生长机制研究进展[J]. 储能科学与技术, 2017, 6(3): 418-432.
	Shen X, Zhang R, Cheng X B, et al. Recent progress on in situ observation and growth mechanism of lithium metal dendrites[J]. Energy Storage Science and Technology, 2017, 6(3): 418-432.
31	Tikekar M D, Choudhury S, Tu Z Y, et al. Design principles for electrolytes and interfaces for stable lithium-metal batteries[J]. Nature Energy, 2016, 1(9): 1-7.
32	Fan H L, Gao C H, Jiang H, et al. A systematical study on the electrodeposition process of metallic lithium[J]. Journal of Energy Chemistry, 2020, 49: 59-70.
33	Li N, Ye Q, Zhang K, et al. Normalized lithium growth from the nucleation stage for dendrite-free lithium metal anodes[J]. Angewandte Chemie International Edition, 2019, 58(50): 18246-18251.
34	Shi F F, Pei A, Boyle D T, et al. Lithium metal stripping beneath the solid electrolyte interphase[J]. PNAS, 2018, 115(34): 8529-8534.
35	Huang F Y, Wang S, Jie Y L, et al. Deciphering pitting behavior of lithium metal anodes in lithium sulfur batteries[J]. Journal of Energy Chemistry, 2020, 49: 257-261.
36	Liu H, Cheng X B, Xu R, et al. Plating/stripping behavior of actual lithium metal anode[J]. Advanced Energy Materials, 2019, 9(44): 1902254.
37	Fang C C, Li J X, Zhang M H, et al. Quantifying inactive lithium in lithium metal batteries[J]. Nature, 2019, 572(7770): 511-515.
38	Aryanfar A, Brooks D J, Colussi A J, et al. Quantifying the dependence of dead lithium losses on the cycling period in lithium metal batteries[J]. Phys. Chem. Chem. Phys., 2014, 16(45): 24965-24970.
39	Chen K H, Wood K N, Kazyak E, et al. Dead lithium: mass transport effects on voltage, capacity, and failure of lithium metal anodes[J]. Journal of Materials Chemistry A, 2017, 5(23): 11671-11681.
40	Wood K N, Kazyak E, Chadwick A F, et al. Dendrites and pits: untangling the complex behavior of lithium metal anodes through operando video microscopy[J]. ACS Cent. Sci., 2016, 2(11): 790-801.
41	Shi P, Cheng X B, Li T, et al. Electrochemical diagram of an ultrathin lithium metal anode in pouch cells[J]. Advanced Materials, 2019, 31(37): 1902785.
42	Xia S X, Lopez J, Liang C, et al. High-rate and large-capacity lithium metal anode enabled by volume conformal and self-healable composite polymer electrolyte[J]. Advanced Science, 2019, 6(9): 1802353.
43	Cai W, Yao Y X, Zhu G L, et al. A review on energy chemistry of fast-charging anodes[J]. Chemical Society Reviews, 2020, 49(12): 3806-3833.
44	Han Y Y, Liu B, Xiao Z, et al. Interface issues of lithium metal anode for high-energy batteries: challenges, strategies, and perspectives[J]. InfoMat, 2021, 3(2): 155-174.
45	Yan C, Zhang X Q, Huang J Q, et al. Lithium-anode protection in lithium-sulfur batteries[J]. Trends in Chemistry, 2019, 1(7): 693-704.
46	Yan C, Xu R, Qin J L, et al. 4.5 V high-voltage rechargeable batteries enabled by the reduction of polarization on the lithium metal anode[J]. Angewandte Chemie International Edition, 2019, 58(43): 15235-15238.
47	Shen X, Liu H, Cheng X B, et al. Beyond lithium ion batteries: higher energy density battery systems based on lithium metal anodes[J]. Energy Storage Materials, 2018, 12: 161-175.
48	Li L Y, Chen C G, Yu A S. New electrochemical energy storage systems based on metallic lithium anode-the research status, problems and challenges of lithium-sulfur, lithium-oxygen and all solid state batteries[J]. Science China Chemistry, 2017, 60(11): 1402-1412.
49	Adams B D, Zheng J M, Ren X D, et al. Accurate determination of coulombic efficiency for lithium metal anodes and lithium metal batteries[J]. Advanced Energy Materials, 2018, 8(7): 1702097.
50	Lin D, Liu Y, Li Y, et al. Fast galvanic lithium corrosion involving a Kirkendall-type mechanism[J]. Nature Chemistry, 2019, 11(4): 382-389.
51	Scharifker B, Hills G. Theoretical and experimental studies of multiple nucleation[J]. Electrochimica Acta, 1983, 28(7): 879-889.
52	Chazalviel J. Electrochemical aspects of the generation of ramified metallic electrodeposits[J]. Physical Review. A, Atomic, Molecular, and Optical Physics, 1990, 42(12): 7355-7367.
53	Monroe C, Newman J. Dendrite growth in lithium/polymer systems[J]. Journal of the Electrochemical Society, 2003, 150(10): A1377.
54	Akolkar R. Mathematical model of the dendritic growth during lithium electrodeposition[J]. Journal of Power Sources, 2013, 232: 23-28.
55	Akolkar R. Modeling dendrite growth during lithium electrodeposition at sub-ambient temperature[J]. Journal of Power Sources, 2014, 246: 84-89.
56	Aryanfar A, Brooks D, Merinov B V, et al. Dynamics of lithium dendrite growth and inhibition: pulse charging experiments and Monte Carlo calculations[J]. The Journal of Physical Chemistry Letters, 2014, 5(10): 1721-1726.
57	Liang Z, Yan K, Zhou G, et al. Composite lithium electrode with mesoscale skeleton via simple mechanical deformation[J]. Science Advances, 2019, 5(3): eaau5655.
58	林振康, 乔耀璇, 王伟, 等. 基于非线性动力学的锂沉积形貌模拟与预测[J]. 化工学报, 2020, 71(9): 4228-4237.
	Lin Z K, Qiao Y X, Wang W, et al. Morphology prediction of lithium plating by finite element modeling and simulations based on non-linear kinetics [J]. CIESC Journal, 2020, 71(9): 4228-4237.
59	Shen X, Zhang R, Chen X, et al. Solid electrolyte interphase: the failure of solid electrolyte interphase on Li metal anode: structural uniformity or mechanical strength?[J]. Advanced Energy Materials, 2020, 10(10): 2070045.
60	Xu B Q, Liu Z, Li J X, et al. Engineering interfacial adhesion for high-performance lithium metal anode[J]. Nano Energy, 2020, 67: 104242.
61	Li G X, Liu Z, Wang D W, et al. Electrokinetic phenomena enhanced lithium-ion transport in leaky film for stable lithium metal anodes[J]. Advanced Energy Materials, 2019, 9(22): 1900704.
62	Bazant M Z. Theory of chemical kinetics and charge transfer based on nonequilibrium thermodynamics[J]. Accounts of Chemical Research, 2013, 46(5): 1144-1160.
63	Nadkarni N, Zhou T T, Fraggedakis D, et al. Modeling the metal-insulator phase transition in Li_xCoO₂ for energy and information storage[J]. Advanced Functional Materials, 2019, 29(40): 1902821.
64	张睿, 沈馨, 王金福, 等. 锂离子在三维骨架复合锂金属负极中的沉积规律[J]. 化工学报, 2020, 71(6): 2688-2695.
	Zhang R, Shen X, Wang J F, et al. Plating of Li ions in 3D structured lithium metal anodes [J]. CIESC Journal, 2020, 71(6): 2688-2695.
65	Guyer J E, Boettinger W J, Warren J A, et al. Phase field modeling of electrochemistry(I): Equilibrium[J]. Physical Review E, 2004, 69(2): 021603.
66	Guyer J E, Boettinger W J, Warren J A, et al. Phase field modeling of electrochemistry(Ⅱ): Kinetics[J]. Physical Review E, 2004, 69(2): 021604.
67	Shibuta Y, Okajima Y, Suzuki T. Phase-field modeling for electrodeposition process[J]. Science and Technology of Advanced Materials, 2007, 8(6): 511-518.
68	Chen L, Zhang H W, Liang L Y, et al. Modulation of dendritic patterns during electrodeposition: a nonlinear phase-field model[J]. Journal of Power Sources, 2015, 300: 376-385.
69	Tian H K, Liu Z, Ji Y Z, et al. Interfacial electronic properties dictate Li dendrite growth in solid electrolytes[J]. Chemistry of Materials, 2019, 31(18): 7351-7359.
70	Zhang R, Shen X, Cheng X B, et al. The dendrite growth in 3D structured lithium metal anodes: electron or ion transfer limitation? [J]. Energy Storage Materials, 2019, 23: 556-565.
71	Shen X, Zhang R, Shi P, et al. How does external pressure shape Li dendrites in Li metal batteries? [J]. Advanced Energy Materials, 2021, 11(10): 2003416.
72	Jana A, Woo S I, Vikrant K S N, et al. Electrochemomechanics of lithium dendrite growth[J]. Energy & Environmental Science, 2019, 12(12): 3595-3607.
73	Liu H, Cheng X B, Zhang R, et al. Mesoporous graphene hosts for dendrite-free lithium metal anode in working rechargeable batteries[J]. Transactions of Tianjin University, 2020, 26(2): 127-134.
74	Cheng X B, Peng H J, Huang J Q, et al. Dual-phase lithium metal anode containing a polysulfide-induced solid electrolyte interphase and nanostructured graphene framework for lithium-sulfur batteries[J]. ACS Nano, 2015, 9(6): 6373-6382.
75	Mao H, Yu W, Cai Z Y, et al. Current-density regulating lithium metal directional deposition for long cycle-life Li metal batteries[J]. Angewandte Chemie International Edition, 2021, 60(35): 19306-19313.
76	Hong B, Fan H L, Cheng X B, et al. Spatially uniform deposition of lithium metal in 3D Janus hosts[J]. Energy Storage Materials, 2019, 16: 259-266.
77	Chen X R, Li B Q, Zhu C, et al. A coaxial-interweaved hybrid lithium metal anode for long-lifespan lithium metal batteries[J]. Advanced Energy Materials, 2019, 9(39): 1901932.
78	Wang J Y, Cui Y, Wang D. Design of hollow nanostructures for energy storage, conversion and production[J]. Advanced Materials, 2019, 31(38): 1801993.
79	Xie H Y, Hao Q, Jin H C, et al. Redistribution of Li-ions using covalent organic frameworks towards dendrite-free lithium anodes: a mechanism based on a Galton Board[J]. Science China Chemistry, 2020, 63(9): 1306-1314.
80	Shi H D, Qin J Q, Huang K, et al. A two-dimensional mesoporous polypyrrole-graphene oxide heterostructure as a dual-functional ion redistributor for dendrite-free lithium metal anodes[J]. Angewandte Chemie International Edition, 2020, 59(29): 12147-12153.
81	Liu J, Yuan H, Tao X Y, et al. Recent progress on biomass-derived ecomaterials toward advanced rechargeable lithium batteries[J]. EcoMat, 2020, 2(1): e12019.
82	Du Y, Gao X, Li S W, et al. Recent advances in metal-organic frameworks for lithium metal anode protection[J]. Chinese Chemical Letters, 2020, 31(3): 609-616.
83	Liu J, Yuan H, Cheng X B, et al. A review of naturally derived nanostructured materials for safe lithium metal batteries[J]. Materials Today Nano, 2019, 8: 100049.
84	Chen L, Fan X L, Ji X, et al. High-energy Li metal battery with lithiated host[J]. Joule, 2019, 3(3): 732-744.
85	Lin D, Zhao J, Sun J, et al. Three-dimensional stable lithium metal anode with nanoscale lithium islands embedded in ionically conductive solid matrix[J]. Proceedings of the National Academy of Sciences of the United States of America, 2017, 114(18): 4613-4618.
86	Cheng X B, Peng H J, Huang J Q, et al. Dendrite-free nanostructured anode: entrapment of lithium in a 3D fibrous matrix for ultra-stable lithium-sulfur batteries[J]. Small, 2014, 10(21): 4257-4263.
87	Liu L, Yin Y X, Li J Y, et al. Ladderlike carbon nanoarrays on 3D conducting skeletons enable uniform lithium nucleation for stable lithium metal anodes[J]. Chemical Communications, 2018, 54(42): 5330-5333.
88	Lu S T, Wang Z D, Yan H, et al. High rate and cycling stable Li metal anodes enabled with aluminum-zinc oxides modified copper foam[J]. Journal of Energy Chemistry, 2020, 41: 87-92.
89	He D Q, Liao Y Q, Cheng Z X, et al. Facile one-step vulcanization of copper foil towards stable Li metal anode[J]. Science China Materials, 2020, 63(9): 1663-1671.
90	Gu Y, Xu H Y, Zhang X G, et al. Lithiophilic faceted Cu(100) surfaces: high utilization of host surface and cavities for lithium metal anodes[J]. Angewandte Chemie International Edition, 2019, 58(10): 3092-3096.
91	Cheng X B, Hou T Z, Zhang R, et al. Dendrite-free lithium deposition induced by uniformly distributed lithium ions for efficient lithium metal batteries[J]. Advanced Materials, 2016, 28(15): 2888-2895.
92	Zhang W, Zhuang H L, Fan L, et al. A“cation-anion regulation” synergistic anode host for dendrite-free lithium metal batteries[J]. Science Advances, 2018, 4(2): eaar4410.
93	Chen X, Chen X R, Hou T Z, et al. Lithiophilicity chemistry of heteroatom-doped carbon to guide uniform lithium nucleation in lithium metal anodes[J]. Science Advances, 2019, 5(2): eaau7728.
94	Li B Q, Chen X R, Chen X, et al. Favorable lithium nucleation on lithiophilic framework porphyrin for dendrite-free lithium metal anodes[J]. Research, 2019, 2019: 4608940.
95	Zhang R, Cheng X B, Zhao C Z, et al. Conductive nanostructured scaffolds render low local current density to inhibit lithium dendrite growth[J]. Advanced Materials, 2016, 28(11): 2155-2162.
96	Zhang R, Chen X, Shen X, et al. Coralloid carbon fiber-based composite lithium anode for robust lithium metal batteries[J]. Joule, 2018, 2(4): 764-777.
97	Zhang R, Chen X R, Chen X, et al. Lithiophilic sites in doped graphene guide uniform lithium nucleation for dendrite-free lithium metal anodes[J]. Angewandte Chemie International Edition, 2017, 56(27): 7764-7768.
98	Song Y W, Shi P, Li B Q, et al. Covalent organic frameworks construct precise lithiophilic sites for uniform lithium deposition[J]. Matter, 2021, 4(1): 253-264.
99	Chen X, Bai Y K, Shen X, et al. Sodiophilicity/potassiophilicity chemistry in sodium/potassium metal anodes[J]. Journal of Energy Chemistry, 2020, 51: 1-6.
100	Chen X R, Chen X, Yan C, et al. Role of lithiophilic metal sites in lithium metal anodes[J]. Energy & Fuels, 2021, 35(15): 12746-12752.
101	Wang S H, Yin Y X, Zuo T T, et al. Stable Li metal anodes via regulating lithium plating/stripping in vertically aligned microchannels[J]. Advanced Materials, 2017, 29(40): 1703729.
102	Xie J, Wang J Y, Lee H R, et al. Engineering stable interfaces for three-dimensional lithium metal anodes[J]. Science Advances, 2018, 4(7): eaat5168.
103	Wang C W, Gong Y H, Liu B Y, et al. Conformal, nanoscale ZnO surface modification of garnet-based solid-state electrolyte for lithium metal anodes[J]. Nano Letters, 2017, 17(1): 565-571.
104	Zhang Y, Luo W, Wang C W, et al. High-capacity, low-tortuosity, and channel-guided lithium metal anode[J]. PNAS, 2017, 114(14): 3584-3589.
105	Li T, Shi P, Zhang R, et al. Dendrite-free sandwiched ultrathin lithium metal anode with even lithium plating and stripping behavior[J]. Nano Research, 2019, 12(9): 2224-2229.
106	Shen X, Cheng X B, Shi P, et al. Lithium-matrix composite anode protected by a solid electrolyte layer for stable lithium metal batteries[J]. Journal of Energy Chemistry, 2019, 37: 29-34.
107	Yang C P, Xie H, Ping W W, et al. An electron/ion dual-conductive alloy framework for high-rate and high-capacity solid-state lithium-metal batteries[J]. Advanced Materials, 2019, 31(3): 1804815.
108	Ye H, Zheng Z J, Yao H R, et al. Guiding uniform Li plating/stripping through lithium-aluminum alloying medium for long-life Li metal batteries[J]. Angewandte Chemie International Edition, 2019, 58(4): 1094-1099.
109	Zeng S B, Arumugam G M, Li W T, et al. Robust interface layers with redox shuttle reactions suppress the dendrite growth for stable solid-state Li metal batteries[J]. Journal of Energy Chemistry, 2020, 51: 222-229.
110	Wu K, Zhao B L, Yang C K, et al. ZnCo₂O₄/ZnO induced lithium deposition in multi-scaled carbon/nickel frameworks for dendrite-free lithium metal anode[J]. Journal of Energy Chemistry, 2020, 43: 16-23.
111	王成林, 屈思吉, 李晶泽. 锂合金薄膜层保护金属锂负极的机理[J]. 储能科学与技术, 2020, 9(2): 368-374.
	Wang C L, Qu S J, Li J Z. Protective mechanism of the Li alloy film-buffered Li metal anode[J]. Energy Storage Science and Technology, 2020, 9(2): 368-374.
112	Liu H, Cheng X B, Huang J Q, et al. Alloy anodes for rechargeable alkali-metal batteries: progress and challenge[J]. ACS Materials Letters, 2019, 1(2): 217-229.
113	Liang X, Pang Q, Kochetkov I R, et al. A facile surface chemistry route to a stabilized lithium metal anode[J]. Nature Energy, 2017, 2(9): 1-7.
114	Guo F H, Wu C, Chen H, et al. Dendrite-free lithium deposition by coating a lithiophilic heterogeneous metal layer on lithium metal anode[J]. Energy Storage Materials, 2020, 24: 635-643.
115	Chang J, Shang J, Sun Y M, et al. Flexible and stable high-energy lithium-sulfur full batteries with only 100% oversized lithium[J]. Nature Communications, 2018, 9: 4480.
116	Liu K, Kong B, Liu W, et al. Stretchable lithium metal anode with improved mechanical and electrochemical cycling stability[J]. Joule, 2018, 2(9): 1857-1865.
117	Li T, Liu H, Shi P, et al. Recent progress in carbon/lithium metal composite anode for safe lithium metal batteries[J]. Rare Metals, 2018, 37(6): 449-458.
118	Wang S J, Xiong P, Zhang J Q, et al. Recent progress on flexible lithium metal batteries: composite lithium metal anodes and solid-state electrolytes[J]. Energy Storage Materials, 2020, 29: 310-331.
119	Zhan Y X, Shi P, Zhang R, et al. Deciphering the effect of electrical conductivity of hosts on lithium deposition in composite lithium metal anodes[J]. Advanced Energy Materials, 2021, 11(37): 2101654.
120	Fan L, Li S Y, Liu L, et al. Enabling stable lithium metal anode via 3D inorganic skeleton with superlithiophilic interphase[J]. Advanced Energy Materials, 2018, 8(33): 1802350.
121	Yang C P, Zhang L, Liu B Y, et al. Continuous plating/stripping behavior of solid-state lithium metal anode in a 3D ion-conductive framework[J]. PNAS, 2018, 115(15): 3770-3775.
122	Wang H S, Lin D C, Xie J, et al. An interconnected channel-like framework as host for lithium metal composite anodes[J]. Advanced Energy Materials, 2019, 9(7): 1802720.
123	Zhang R, Li N W, Cheng X B, et al. Advanced micro/nanostructures for lithium metal anodes[J]. Advanced Science, 2017, 4(3): 1600445.
124	Zhan Y, Shi P, Zhang X, et al. Recent progress of lithiophilic host for lithium metal anode[J]. Chemical Journal of Chinese Universities, 2021, 42: 1569-1580.
125	Kong L, Tang C, Peng H J, et al. Advanced energy materials for flexible batteries in energy storage: a review[J]. SmartMat, 2020, 1(1): e1007.
126	Zhang X Q, Cheng X B, Zhang Q. Advances in interfaces between Li metal anode and electrolyte[J]. Advanced Materials Interfaces, 2018, 5(2): 1701097.
127	Wang X S, Mai W C, Guan X C, et al. Recent advances of electroplating additives enabling lithium metal anodes to applicable battery techniques[J]. Energy & Environmental Materials, 2021, 4(3): 284-292.
128	Ding J F, Xu R, Yan C, et al. A review on the failure and regulation of solid electrolyte interphase in lithium batteries[J]. Journal of Energy Chemistry, 2021, 59: 306-319.
129	Yang H C, Li J, Sun Z H, et al. Reliable liquid electrolytes for lithium metal batteries[J]. Energy Storage Materials, 2020, 30: 113-129.
130	Chen W J, Li B Q, Zhao C X, et al. Electrolyte regulation towards stable lithium-metal anodes in lithium-sulfur batteries with sulfurized polyacrylonitrile cathodes[J]. Angewandte Chemie International Edition, 2020, 59(27): 10732-10745.
131	冯建文, 胡时光, 韩兵, 等. 锂金属电池电解液组分调控的研究进展[J]. 储能科学与技术, 2020, 9(6): 1629-1640.
	Feng J W, Hu S G, Han B, et al. Research progress of electrolyte optimization for lithium metal batteries[J]. Energy Storage Science and Technology, 2020, 9(6): 1629-1640.
132	Jiao S H, Ren X D, Cao R G, et al. Stable cycling of high-voltage lithium metal batteries in ether electrolytes[J]. Nature Energy, 2018, 3(9): 739-746.
133	Li X, Zheng J M, Ren X D, et al. Dendrite-free and performance-enhanced lithium metal batteries through optimizing solvent compositions and adding combinational additives[J]. Advanced Energy Materials, 2018, 8(15): 1703022.
134	Wang Z X, Sun C G, Shi Y, et al. A salt-derived solid electrolyte interphase by electroreduction of water-in-salt electrolyte for uniform lithium deposition[J]. Journal of Power Sources, 2019, 439: 227073.
135	Li F, He J, Liu J D, et al. Gradient solid electrolyte interphase and lithium-ion solvation regulated by bisfluoroacetamide for stable lithium metal batteries[J]. Angewandte Chemie International Edition, 2021, 60(12): 6600-6608.
136	Zhang X Q, Li T, Li B Q, et al. A sustainable solid electrolyte interphase for high-energy-density lithium metal batteries under practical conditions[J]. Angewandte Chemie International Edition, 2020, 59(8): 3252-3257.
137	Li S Y, Zhang W D, Wu Q, et al. Synergistic dual-additive electrolyte enables practical lithium-metal batteries[J]. Angewandte Chemie International Edition, 2020, 59(35): 14935-14941.
138	Jie Y L, Liu X J, Lei Z W, et al. Enabling high-voltage lithium metal batteries by manipulating solvation structure in ester electrolyte[J]. Angewandte Chemie International Edition, 2020, 59(9): 3505-3510.
139	Hou L P, Zhang X Q, Li B Q, et al. Cycling a lithium metal anode at 90℃ in a liquid electrolyte[J]. Angewandte Chemie International Edition, 2020, 59(35): 15109-15113.
140	Chen W J, Zhao C X, Li B Q, et al. A mixed ether electrolyte for lithium metal anode protection in working lithium-sulfur batteries[J]. Energy & Environmental Materials, 2020, 3(2): 160-165.
141	Zhang X Q, Zhao C Z, Huang J Q, et al. Recent advances in energy chemical engineering of next-generation lithium batteries[J]. Engineering, 2018, 4(6): 831-847.
142	Zhang X Q, Chen X, Xu R, et al. Columnar lithium metal anodes[J]. Angewandte Chemie International Edition, 2017, 56(45): 14207-14211.
143	Fan X L, Chen L, Ji X, et al. Highly fluorinated interphases enable high-voltage Li-metal batteries[J]. Chem, 2018, 4(1): 174-185.
144	Ren X D, Zou L F, Jiao S H, et al. High-concentration ether electrolytes for stable high-voltage lithium metal batteries[J]. ACS Energy Letters, 2019, 4(4): 896-902.
145	Zhu G L, Zhao C Z, Yuan H, et al. Liquid phase therapy with localized high-concentration electrolytes for solid-state Li metal pouch cells[J]. Acta Physico Chimica Sinica, 2020: 2005003.
146	Chen S R, Zheng J M, Mei D H, et al. High-voltage lithium-metal batteries enabled by localized high-concentration electrolytes[J]. Advanced Materials, 2018, 30(21): 1706102.
147	Yamada Y, Wang J H, Ko S, et al. Advances and issues in developing salt-concentrated battery electrolytes[J]. Nature Energy, 2019, 4(4): 269-280.
148	Yan C, Yao Y X, Chen X, et al. Lithium nitrate solvation chemistry in carbonate electrolyte sustains high-voltage lithium metal batteries[J]. Angewandte Chemie International Edition, 2018, 57(43): 14055-14059.
149	Liu Y Y, Lin D C, Li Y Z, et al. Solubility-mediated sustained release enabling nitrate additive in carbonate electrolytes for stable lithium metal anode[J]. Nature Communications, 2018, 9: 3656.
150	Fu J L, Ji X, Chen J, et al. Lithium nitrate regulated sulfone electrolytes for lithium metal batteries[J]. Angewandte Chemie International Edition, 2020, 59(49): 22194-22201.
151	Zheng J M, Engelhard M H, Mei D H, et al. Electrolyte additive enabled fast charging and stable cycling lithium metal batteries[J]. Nature Energy, 2017, 2(3): 1-8.
152	Cheng X B, Yan C, Chen X, et al. Implantable solid electrolyte interphase in lithium-metal batteries[J]. Chem, 2017, 2(2): 258-270.
153	Cheng X B, Yan C, Peng H J, et al. Sulfurized solid electrolyte interphases with a rapid Li⁺ diffusion on dendrite-free Li metal anodes[J]. Energy Storage Materials, 2018, 10: 199-205.
154	Wei J Y, Zhang X Q, Hou L P, et al. Shielding polysulfide intermediates by an organosulfur-containing solid electrolyte interphase on the lithium anode in lithium-sulfur batteries[J]. Advanced Materials, 2020, 32(37): 2003012.
155	Chen J X, Zhang X Q, Li B Q, et al. The origin of sulfuryl-containing components in SEI from sulfate additives for stable cycling of ultrathin lithium metal anodes[J]. Journal of Energy Chemistry, 2020, 47: 128-131.
156	Zhang X Q, Chen X, Cheng X B, et al. Highly stable lithium metal batteries enabled by regulating the solvation of lithium ions in nonaqueous electrolytes[J]. Angewandte Chemie International Edition, 2018, 57(19): 5301-5305.
157	Zhang X Q, Cheng X B, Chen X, et al. Fluoroethylene carbonate additives to render uniform Li deposits in lithium metal batteries[J]. Advanced Functional Materials, 2017, 27(10): 1605989.
158	Zhang M S, Liu R J, Wang Z K, et al. Electrolyte additive maintains high performance for dendrite-free lithium metal anode[J]. Chinese Chemical Letters, 2020, 31(5): 1217-1220.
159	Ren X D, Zhang Y H, Engelhard M H, et al. Guided lithium metal deposition and improved lithium coulombic efficiency through synergistic effects of LiAsF₆ and cyclic carbonate additives[J]. ACS Energy Letters, 2018, 3(1): 14-19.
160	Li N W, Yin Y X, Li J Y, et al. Passivation of lithium metal anode via hybrid ionic liquid electrolyte toward stable Li plating/stripping[J]. Advanced Science, 2017, 4(2): 1600400.
161	Qi S H, Wang H P, He J, et al. Electrolytes enriched by potassium perfluorinated sulfonates for lithium metal batteries[J]. Science Bulletin, 2021, 66(7): 685-693.
162	Xu H W, He Y, Zhang Z B, et al. Slurry-like hybrid electrolyte with high lithium-ion transference number for dendrite-free lithium metal anode[J]. Journal of Energy Chemistry, 2020, 48: 375-382.
163	Liu J R, Wang Y L, Liu F M, et al. Improving metallic lithium anode with NaPF₆ additive in LiPF₆-carbonate electrolyte[J]. Journal of Energy Chemistry, 2020, 42: 1-4.
164	Manthiram A, Yu X W, Wang S F. Lithium battery chemistries enabled by solid-state electrolytes[J]. Nature Reviews Materials, 2017, 2: 16103.
165	Zhao Q, Stalin S, Zhao C Z, et al. Designing solid-state electrolytes for safe, energy-dense batteries[J]. Nature Reviews Materials, 2020, 5(3): 229-252.
166	Lu Y, Zhao C Z, Yuan H, et al. Critical current density in solid-state lithium metal batteries: mechanism, influences, and strategies[J]. Advanced Functional Materials, 2021, 31(18): 2009925.
167	Liu J, Yuan H, Liu H, et al. Unlocking the failure mechanism of solid state lithium metal batteries[J]. Advanced Energy Materials, 2021: 2100748.
168	南皓雄, 赵辰孜, 袁洪, 等. 固态金属锂电池研究进展:外部压力和内部应力的影响[J]. 化工学报, 2021, 72(1): 61-70.
	Nan H X, Zhao C Z, Yuan H, et al. Recent advances in solid-state lithium metal batteries: the role of external pressure and internal stress[J]. CIESC Journal, 2021, 72(1): 61-70.
169	Zhao C Z, Chen P Y, Zhang R, et al. An ion redistributor for dendrite-free lithium metal anodes[J]. Science Advances, 2018, 4(11): eaat3446.
170	Han F D, Yue J, Chen C, et al. Interphase engineering enabled all-ceramic lithium battery[J]. Joule, 2018, 2(3): 497-508.
171	Gao J, Shao Q J, Chen J. Lithiated Nafion-garnet ceramic composite electrolyte membrane for solid-state lithium metal battery[J]. Journal of Energy Chemistry, 2020, 46: 237-247.
172	Ding J F, Xu R, Yan C, et al. Integrated lithium metal anode protected by composite solid electrolyte film enables stable quasi-solid-state lithium metal batteries[J]. Chinese Chemical Letters, 2020, 31(9): 2339-2342.
173	Li P L, Dong X L, Li C, et al. Anchoring an artificial solid-electrolyte interphase layer on a 3D current collector for high-performance lithium anodes[J]. Angewandte Chemie International Edition, 2019, 58(7): 2093-2097.
174	Han F D, Zhu Y Z, He X F, et al. Electrochemical stability of Li₁₀GeP₂S₁₂ and Li₇La₃Zr₂O₁₂ solid electrolytes[J]. Advanced Energy Materials, 2016, 6(8): 1501590.
175	Yao X Y, Huang N, Han F D, et al. High-performance all-solid-state lithium-sulfur batteries enabled by amorphous sulfur-coated reduced graphene oxide cathodes[J]. Advanced Energy Materials, 2017, 7(17): 1602923.
176	Yao X Y, Liu D, Wang C S, et al. High-energy all-solid-state lithium batteries with ultralong cycle life[J]. Nano Letters, 2016, 16(11): 7148-7154.
177	Wang X L, Xiao R J, Li H, et al. Oxygen-driven transition from two-dimensional to three-dimensional transport behaviour in β-Li₃PS₄ electrolyte[J]. Physical Chemistry Chemical Physics, 2016, 18(31): 21269-21277.
178	吴敬华, 姚霞银. 基于硫化物固体电解质全固态锂电池界面特性研究进展[J]. 储能科学与技术, 2020, 9(2): 501-514.
	Wu J H, Yao X Y. Recent progress in interfaces of all-solid-state lithium batteries based on sulfide electrolytes[J]. Energy Storage Science and Technology, 2020, 9(2): 501-514.
179	Zhao C Z, Zhang X Q, Cheng X B, et al. An anion-immobilized composite electrolyte for dendrite-free lithium metal anodes[J]. PNAS, 2017, 114(42): 11069-11074.
180	Wan J Y, Xie J, Kong X, et al. Ultrathin, flexible, solid polymer composite electrolyte enabled with aligned nanoporous host for lithium batteries[J]. Nature Nanotechnology, 2019, 14(7): 705-711.
181	Shen Y Q, Zeng F L, Zhou X Y, et al. A novel permselective organo-polysulfides/PVDF gel polymer electrolyte enables stable lithium anode for lithium-sulfur batteries[J]. Journal of Energy Chemistry, 2020, 48: 267-276.
182	Jaumaux P, Liu Q, Zhou D, et al. Deep-eutectic-solvent-based self-healing polymer electrolyte for safe and long-life lithium-metal batteries[J]. Angewandte Chemie International Edition, 2020, 59(23): 9134-9142.
183	Fan W, Li N W, Zhang X L, et al. A dual-salt gel polymer electrolyte with 3D cross-linked polymer network for dendrite-free lithium metal batteries[J]. Advanced Science, 2018, 5(9): 1800559.
184	Liu F Q, Wang W P, Yin Y X, et al. Upgrading traditional liquid electrolyte viain situ gelation for future lithium metal batteries[J]. Science Advances, 2018, 4(10): eaat5383.
185	Zeng X X, Yin Y X, Shi Y, et al. Lithiation-derived repellent toward lithium anode safeguard in quasi-solid batteries[J]. Chem, 2018, 4(2): 298-307.
186	Lu Y, Huang X, Song Z, et al. Highly stable garnet solid electrolyte based Li-S battery with modified anodic and cathodic interfaces[J]. Energy Storage Materials, 2018, 15: 282-290.
187	Xu S M, Duan H, Shi J L, et al. In situ fluorinated solid electrolyte interphase towards long-life lithium metal anodes[J]. Nano Research, 2020, 13(2): 430-436.
188	Yan C, Jiang L L, Yao Y X, et al. Nucleation and growth mechanism of anion-derived solid electrolyte interphase in rechargeable batteries[J]. Angewandte Chemie International Edition, 2021, 60(15): 8521-8525.
189	Ding J F, Xu R, Yao N, et al. Non-solvating and low-dielectricity cosolvent for anion-derived solid electrolyte interphases in lithium metal batteries[J]. Angewandte Chemie International Edition, 2021, 60(20): 11442-11447.
190	Zhang Q K, Liu S, Lu Y T, et al. Artificial interphases enable dendrite-free Li-metal anodes[J]. Journal of Energy Chemistry, 2021, 58: 198-206.
191	Xu X Q, Xu R, Cheng X B, et al. A two-dimension laminar composite protective layer for dendrite-free lithium metal anode[J]. Journal of Energy Chemistry, 2021, 56: 391-394.
192	Yao Y X, Zhang X Q, Li B Q, et al. A compact inorganic layer for robust anode protection in lithium-sulfur batteries[J]. InfoMat, 2020, 2(2): 379-388.
193	Yang Q L, Li W L, Dong C, et al. PIM-1 as an artificial solid electrolyte interphase for stable lithium metal anode in high-performance batteries[J]. Journal of Energy Chemistry, 2020, 42: 83-90.
194	Wang H T, Tang Y B. Artificial solid electrolyte interphase acting as“armor”to protect the anode materials for high-performance lithium-ion battery[J]. Chemical Research in Chinese Universities, 2020, 36(3): 402-409.
195	Tu Y R, Ma Q T, Wang A X, et al. Skin care design for lithium metal protection with cosmetics introduction[J]. Journal of Energy Chemistry, 2020, 48: 383-389.
196	Liang Y R, Xiao Y, Yan C, et al. A bifunctional ethylene-vinyl acetate copolymer protective layer for dendrites-free lithium metal anodes[J]. Journal of Energy Chemistry, 2020, 48: 203-207.
197	Zhao C Z, Duan H, Huang J Q, et al. Designing solid-state interfaces on lithium-metal anodes: a review[J]. Science China Chemistry, 2019, 62(10): 1286-1299.
198	Gao Z G, Zhang S J, Huang Z G, et al. Protection of Li metal anode by surface-coating of PVDF thin film to enhance the cycling performance of Li batteries[J]. Chinese Chemical Letters, 2019, 30(2): 525-528.
199	Pang Q, Liang X, Kochetkov I R, et al. Stabilizing lithium plating by a biphasic surface layer formed in situ[J]. Angewandte Chemie International Edition, 2018, 57(31): 9795-9798.
200	Xu R, Cheng X B, Yan C, et al. Artificial interphases for highly stable lithium metal anode[J]. Matter, 2019, 1(2): 317-344.
201	Xu R, Yan C, Huang J Q. Competitive solid-electrolyte interphase formation on working lithium anodes[J]. Trends in Chemistry, 2021, 3(1): 5-14.
202	Xiao Y, Xu R, Yan C, et al. Waterproof lithium metal anode enabled by cross-linking encapsulation[J]. Science Bulletin, 2020, 65(11): 909-916.
203	Liu J, Xu R, Yan C, et al. In situ regulated solid electrolyte interphase via reactive separators for highly efficient lithium metal batteries[J]. Energy Storage Materials, 2020, 30: 27-33.
204	Xu R, Zhang X Q, Cheng X B, et al. Artificial soft-rigid protective layer for dendrite-free lithium metal anode[J]. Advanced Functional Materials, 2018, 28(8): 1705838.
205	Zheng G Y, Lee S W, Liang Z, et al. Interconnected hollow carbon nanospheres for stable lithium metal anodes[J]. Nature Nanotechnology, 2014, 9(8): 618-623.
206	Li N W, Shi Y, Yin Y X, et al. A flexible solid electrolyte interphase layer for long-life lithium metal anodes[J]. Angewandte Chemie International Edition, 2018, 57(6): 1505-1509.
207	Kim M S, Ryu J H, Deepika, et al. Langmuir-Blodgett artificial solid-electrolyte interphases for practical lithium metal batteries[J]. Nature Energy, 2018, 3(10): 889-898.

[1]	程业品, 胡达清, 徐奕莎, 刘华彦, 卢晗锋, 崔国凯. 离子液体基低共熔溶剂在转化CO₂中的应用[J]. 化工学报, 2023, 74(9): 3640-3653.
[2]	胡亚丽, 胡军勇, 马素霞, 孙禹坤, 谭学诣, 黄佳欣, 杨奉源. 逆电渗析热机新型工质开发及电化学特性研究[J]. 化工学报, 2023, 74(8): 3513-3521.
[3]	张琦钰, 高利军, 苏宇航, 马晓博, 王翊丞, 张亚婷, 胡超. 碳基催化材料在电化学还原二氧化碳中的研究进展[J]. 化工学报, 2023, 74(7): 2753-2772.
[4]	张蒙蒙, 颜冬, 沈永峰, 李文翠. 电解液类型对双离子电池阴阳离子储存行为的影响[J]. 化工学报, 2023, 74(7): 3116-3126.
[5]	葛加丽, 管图祥, 邱新民, 吴健, 沈丽明, 暴宁钟. 垂直多孔碳包覆的FeF₃正极的构筑及储锂性能研究[J]. 化工学报, 2023, 74(7): 3058-3067.
[6]	屈园浩, 邓文义, 谢晓丹, 苏亚欣. 活性炭/石墨辅助污泥电渗脱水研究[J]. 化工学报, 2023, 74(7): 3038-3050.
[7]	张谭, 刘光, 李晋平, 孙予罕. Ru基氮还原电催化剂性能调控策略[J]. 化工学报, 2023, 74(6): 2264-2280.
[8]	郭旭, 张永政, 夏厚兵, 杨娜, 朱真珍, 齐晶瑶. 碳基材料电氧化去除水体污染物的研究进展[J]. 化工学报, 2023, 74(5): 1862-1874.
[9]	张正, 何永平, 孙海东, 张荣子, 孙正平, 陈金兰, 郑一璇, 杜晓, 郝晓刚. 蛇形流场电控离子交换装置用于选择性提锂[J]. 化工学报, 2023, 74(5): 2022-2033.
[10]	王承泽, 顾凯丽, 张晋华, 石建轩, 刘艺娓, 李锦祥. 硫化协同老化零价铁增效去除水中Cr（Ⅵ）的作用机制[J]. 化工学报, 2023, 74(5): 2197-2206.
[11]	李瑞康, 何盈盈, 卢维鹏, 王园园, 丁皓东, 骆勇名. 电化学强化钴基阴极活化过一硫酸盐的研究[J]. 化工学报, 2023, 74(5): 2207-2216.
[12]	刘瑞琪, 周栖桐, 张悦, 贺莹, 高静, 马丽. 基于金纳米颗粒修饰二氧化硅纳米花的生物传感器构建及应用[J]. 化工学报, 2023, 74(3): 1247-1259.
[13]	程伟江, 汪何琦, 高翔, 李娜, 马赛男. 锂离子电池硅基负极电解液成膜添加剂的研究进展[J]. 化工学报, 2023, 74(2): 571-584.
[14]	杜江龙, 杨雯棋, 黄凯, 练成, 刘洪来. 复合相变材料/空冷复合式锂离子电池模块散热性能[J]. 化工学报, 2023, 74(2): 674-689.
[15]	宋悦, 张启成, 彭文朝, 李阳, 张凤宝, 范晓彬. MoS₂基单原子催化剂的合成及其在电催化中的应用[J]. 化工学报, 2023, 74(2): 535-545.