CIESC Journal ›› 2021, Vol. 72 ›› Issue (11): 5573-5581.DOI: 10.11949/0438-1157.20210952

• Fluid dynamics and transport phenomena • Previous Articles     Next Articles

Performance analysis and response surface optimization of multi-stage spray flash desalination system

Ben'an CAI(),Mincheng GUO,Xunjian CHE(),Weihua CAI   

  1. School of Energy and Power Engineering, Northeast Electric Power University, Jilin 132012,Jilin, China
  • Received:2021-07-12 Revised:2021-09-30 Online:2021-11-12 Published:2021-11-05
  • Contact: Xunjian CHE

多级喷雾闪蒸海水淡化系统性能分析及响应面优化研究

蔡本安(),郭民承,车勋建(),蔡伟华   

  1. 东北电力大学能源与动力工程学院,吉林省 吉林市 132012
  • 通讯作者: 车勋建
  • 作者简介:蔡本安(1990—),男,博士,讲师,cbenan@neepu.edu.cn
  • 基金资助:
    吉林省教育厅科学技术研究项目(JJKH20210111KJ);东北电力大学博士科研启动基金项目(BSJXM-2020105)

Abstract:

The spray flash technology has become one of the effective methods to solve the shortage of fresh water resources due to its low energy consumption, good separation effect and high cooling capacity. Based on the spray-assisted low-temperature desalination technology, this paper develops the thermodynamic calculation of the internal heat and mass balance of the system, and studies the effect of the spray flash system's operating stages and the top brine temperature on the flash evaporation effect. The research results show that a higher top brine temperature can significantly improve production efficiency. When the top brine temperature is 363 K, the productivity is 3.325 kg/s and the performance ratio is 0.627. Response surface method is used to optimize the spray flash evaporation system, determine the best operating conditions of the system and the model relationship of each response. And the best parameters of the system for desalination are obtained: the top brine temperature is 343 K, the seawater inlet flow rate is 10 kg/s, the cooling water inlet temperature is 303 K, and the cooling water inlet flow rate is 9.5 kg/s.

Key words: desalination, flash evaporation, numerical analysis, influencing factors, optimal design

摘要:

喷雾闪蒸技术因其能耗低、分离效果好、冷却能力高的特点成为解决淡水资源紧缺的有效方法之一。在喷雾辅助低温脱盐技术的基础上,展开系统内部热和质量平衡的热力学计算,研究喷雾闪蒸系统运行级数和顶值盐水温度对闪蒸效果的影响。研究结果表明,更高的顶值盐水温度可以显著提高生产效率,当顶值盐水温度为363 K时,生产率为3.325 kg/s,性能比为0.627。采用响应面法对喷雾闪蒸系统进行优化,确定系统的最佳运行条件以及各响应的模型关系,获得系统淡化的最佳参数:顶值盐水温度343 K,海水进口流量10 kg/s,冷却水进口温度303 K,冷却水进口流量9.5 kg/s。

关键词: 脱盐, 闪蒸, 数值分析, 影响因素, 优化设计

CLC Number: