CIESC Journal ›› 2020, Vol. 71 ›› Issue (S1): 31-37.DOI: 10.11949/0438-1157.20191079

• Thermodynamics • Previous Articles     Next Articles

Topology optimization on heat conduction based on entransy theory

Tingwei ZHANG1,2(),Bin LI2,Xiaoqiang ZHAI2()   

  1. 1.China-UK Low Carbon College, Shanghai Jiao Tong University, Shanghai 200240, China
    2.Institute of Refrigeration and Cryogenics Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
  • Received:2019-10-07 Revised:2019-11-20 Online:2020-04-25 Published:2020-04-25
  • Contact: Xiaoqiang ZHAI

基于理论的传热结构拓扑优化

张庭玮1,2(),李斌2,翟晓强2()   

  1. 1.上海交通大学中英国际低碳学院,上海 200240
    2.上海交通大学制冷与低温工程研究所,上海 200240
  • 通讯作者: 翟晓强
  • 作者简介:张庭玮(1995—),男,硕士研究生,lcczhangtw@sjtu.edu.cn
  • 基金资助:
    国家重点研发计划项目(2016YFE0133300)

Abstract:

Based on entransy theory, the entransy equilibrium equation for two-dimensional steady heat conduction with internal heat source is derived, and the entransy dissipation in this heat conduction process is analyzed. Then, taking entransy dissipation as the objective function, the thermal conductivity of the material as the design variable, the topology model is built with solid isotropic microstructure with penalization method, the model is solved by globally convergent method of moving asymptotes. The entropy generation is also applied as the objective function to compare with the entransy dissipation. The results show that both of minimum entransy dissipation and minimum entropy generation lead the similar heat transfer structure during the optimal process, the topology structure extends outward gradually as the iteration goes on and tends to be optimal, the average temperature can be decreased by 9℃. Finally, the topology structures with different high conductive material fraction are compared under the objective function of minimum entransy dissipation, the results indicate that the entransy dissipation decreases under different volume ratios of high thermal conductive material. Considering the optimization effect and cost, with the high conductive material fraction of 20%, the entransy dissipation of optimal structure can be reduced to 8.7%.

Key words: heat transfer, entransy dissipation, entropy, optimal design

摘要:

理论为基础,分析了在含有内热源的二维稳态导热问题中的耗散。并以此为目标函数,通过密度法建立拓扑优化模型并用全局移动渐近线(GCMMA)开展拓扑优化研究。对比分析了以最小耗散以及最小熵产得到的拓扑优化构型在传热性能上的异同。然后,以最小耗散为优化目标,进一步分析了不同高导热材料体积占比下最优传热拓扑结构。结果表明,最小耗散以及最小熵产得到的拓扑优化构型结构相似,均可大幅增加传热性能,系统的平均温度均可降低9℃以上。而对于传热结构来说,综合考虑优化效果以及成本,20%的体积占比是一个较优值,在此占比下,优化后的耗散仅为优化前的8.7%。基于理论的传热结构拓扑研究为肋片的结构设计以及传热强化提供了理论指导。

关键词: 传热, 耗散, 熵, 优化设计

CLC Number: