CIESC Journal ›› 2020, Vol. 71 ›› Issue (S1): 328-334.DOI: 10.11949/0438-1157.20191125

• Process system engineering • Previous Articles     Next Articles

Modeling and validating of air cycle machine in aircraft environmental control system

Fanxin MENG1(),Jianing SUN2,Yue ZHOU1,Zanjun GAO1,Dingbin CHENG1   

  1. 1.Aviation Key Laboratory of Science and Technology on Aero Electromechanical System Integration in Nanjing Engineering Institute of Aircraft Systems, Nanjing 211106, Jiangsu, China
    2.Nanjing Aircraft Systems Science and Technology Limited Company, Nanjing 211102, Jiangsu, China
  • Received:2019-10-07 Revised:2019-11-13 Online:2020-04-25 Published:2020-04-25
  • Contact: Fanxin MENG

飞机环控系统空气循环机仿真建模及试验校核

孟繁鑫1(),孙佳宁2,周月1,高赞军1,程定斌1   

  1. 1.南京机电液压工程研究中心航空机电系统综合航空科技重点试验室,江苏 南京 211106
    2.南京机电科技有限公司,江苏 南京 211102
  • 通讯作者: 孟繁鑫
  • 作者简介:孟繁鑫(1983—),男,博士,高级工程师,sunsky170@163.com

Abstract:

Mathematical models of compressor-turbine-fan air cycle machine were established in aircraft environmental control system. The simulation models of air cycle machine were developed. The performance test principles and procedures are put forward for the product and performance tests are carried out to obtain the performance data under design conditions. By comparing simulation results and experimental data for compressor pressure ratio and efficiency characteristics, turbine temperature drop, fan pressure rise, the simulation model was corrected and validated. Results show that the modeling method provided in this paper can calculate the performance of the air cycle machine accurately with the ±10% simulation error. The simulation precision meets the requirements of aircraft environmental control system engineering design and it is helpful to develop environmental control system and its components.

Key words: thermodynamics, computer simulation, dynamic modeling, experimental check, air cycle, environmental control system

摘要:

建立了飞机环境控制系统中压气机-涡轮-风扇式空气循环机的数学模型并开发了性能仿真模型;提出了性能试验原理及方法并开展了性能试验获得了设计工况下测试数据;通过对比不同转速下压气机增压比和效率特性、不同膨胀比条件下涡轮的温降特性、风扇压升特性等仿真结果与试验数据,修正了所建仿真模型相关参数并校核了模型有效性。结果表明,提出的仿真建模方法能够对空气循环机进行准确计算,经修正后仿真误差可以控制在±10%以内,仿真精度满足飞机环境控制系统工程设计要求,对环控系统及部件研制具有重要意义。

关键词: 热力学, 计算机模拟, 动态建模, 试验校核, 空气循环, 环控系统

CLC Number: