接触式机械密封摩擦界面温度分布分形模型

doi:10.3969/j.issn.0438-1157.2014.11.047

摘要/Abstract

摘要： 为揭示接触式机械密封摩擦界面的温度分布规律,用分形参数表征机械密封端面形貌特性,根据重新建立的微凸体接触变形方式,结合热传导和概率理论建立了机械密封摩擦界面最大温度以及温度分布的分形模型并用数值方法对其最大温度、温度分布规律以及影响因素进行了分析.研究结果表明,当分形维数一定时,随着转速的增大,密封界面最大温度呈线性增大;当转速一定时,随着分形维数的增大,密封界面最大温度呈非线性减小;随着量纲1特征尺度的增大,量纲1最大接触温度也在增大.当已知润滑膜汽化温度时,由温度分布密度函数,可以求出处于非正常润滑部分的真实接触面积,为进一步研究磨损、热破坏提供基础,这对接触式机械密封的实际运行和密封端面的设计具有重要的意义.

关键词: 机械密封, 摩擦界面, 温度, 分形理论, 密度函数

Abstract: In order to reveal the temperature distribution of the frictional interface mechanical seals, the end face morphology of mechanical seals was characterized by fractal parameters. According to re-established contact deformation model of the micro-convex body, the fractal model of the maximum temperature and the temperature distribution of mechanical seals were established by heat exchange and probability theory. With numerical methods its maximum temperature, temperature distribution and influence factors were analyzed. The highest temperature of frictional interfaces increased linearly with increasing rotating speed when fractal dimension was constant. But the highest temperature of frictional interfaces decreased nonlinearly with increasing fractal dimension when rotating speed was constant. Dimensionless maximum contact temperature also increased as dimensionless characteristic scale was larger. When lubricant film vaporization temperature was known, the real contact area of the non-normal lubrication part could be calculated by using the temperature distribution density function, providing foundation for further research on wear and heat damage and had great significance both in operating and design of contacting mechanical seals.

Key words: mechanical seal, frictional interface, temperature, fractal theory, density function

中图分类号:

丁雪兴, 严如奇, 陈金林, 翟霄. 接触式机械密封摩擦界面温度分布分形模型[J]. 化工学报, 2014, 65(11): 4543-4550.

DING Xuexing, YAN Ruqi, CHEN Jinlin, ZHAI Xiao. Fractal model of temperature distribution of frictional interface in contacting mechanical seals[J]. CIESC Journal, 2014, 65(11): 4543-4550.

参考文献 35

[1]	Wang Tao(王涛), Huang Weifeng(黄伟峰), Wang Yuming(王玉明). Research and progress of mechanical seals operating with vaporization transition [J]. CIESC Journal(化工学报), 2012, 63(11): 3375-3382
[2]	Huang Jianmeng(黄健萌), Gao Chenghui (高诚辉). Thermo- mechanical research on frictional sliding between elasto-plastic rough solid and rigid flat [J]. Journal of Mechanical Engineering(机械工程学报), 2011, 47(11): 87-92
[3]	Chen Lihai(陈利海), Ge Peiqi(葛培琪), Cheng Jianhui(程建辉). The visual computing of temperature field in mechanical seal [J]. Fluid Machinery(流体机械), 2001, 29(5): 28-31
[4]	Archard J F. The temperature of rubbing surfaces [J]. Wear, 1959, 2(6):438-455
[5]	Bhushan B. Magnetic head-media interface temperatures(Ⅰ): Analysis [J]. Journal of Tribology,1987, 109(2): 243-251
[6]	Bhushan B. Magnetic head-media interface temperatures(Ⅱ): Application to magnetic tapes [J]. Journal of Tribology, 1987, 109(2): 252-256
[7]	Wang S, Komvopoulos K. Fractal theory of the interfacial temperature distribution in the slow sliding regime(Ⅰ): Elastic contact and heat transfer analysis [J]. Journal of Tribology, 1994, 116(4): 812-823
[8]	Kovalchyk Y I, Shyrokov V V. Modeling of temperature flashes under the conditions of periodic contact of friction surfaces [J]. Materials Science, 2005, 41(2): 192-201
[9]	Yevtushenko A A, Ivanyk E G, Sykora O V. Transitive temperature processes in local friction contact [J]. International Journal of Heat and Mass Transfer, 1995, 38(13): 2395-2401
[10]	Lestyan Z, Varadi K, Albers A. Contact and thermal analysis of an alumina-steel dry sliding friction pair considering the surface roughness [J]. Tribology International, 2007, 40(6): 982-994
[11]	Elhomani A, Farhang K. A 2D lumped parameter model for prediction of temperature in C/C composite disk pair in dry friction contact [J]. Journal of Thermal Science and Engineering Applications, 2010, 2(2): 021001-021010
[12]	Gennaro C, Vincenzo D, Roberta D G, et al. An analytical solution and an experimental procedure for thermal field at the interface of dry sliding surfaces [J]. Meccanica, 2011, 46(3):589-595
[13]	Aderghal N, Loulou T, Bouchoucha , et al. Analytical and numerical calculation of surface temperature and thermal constriction resistance in transient dynamic strip contact [J]. Applied Thermal Engineering, 2011, 31(8): 1527-1535
[14]	Evtushenko O, Kuciej M, Grzes P. Numerical and analytic solutions of the thermal problem of friction in the course of braking [J]. Materials Science, 2012, 47(6): 783-789
[15]	Yevtushenko A A, Kuciej M, Yevtushenko O. The boundary conditions on the sliding surface in one-dimensional transient heat problem of friction [J]. International Journal of Heat and Mass Transfer, 2013, 59: 1-8
[16]	Kasem H, Brunel J F, Dufrénoy P, et al. Monitoring of temperature and emissivity during successive disc revolutions in braking [J]. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2012, 226(9): 748-759
[17]	Kasem H, Witz J F, Dufrenoy P, et al. Monitoring of transient phenomena in sliding contact application to friction brakes [J]. Tribology Letters, 2013, 51(2): 235-242
[18]	Wu Wenling(吴文林), Li Keyon(李克永), Yang Zhicai(杨志才), Chen Guohuan(陈国桓). Calculation of thermal deformation and thermal stress of machinery seal ring [J]. Fluid Machinery(流体机械), 1981, 3: 6-11
[19]	Pascovici M D, Etsion I. A thermo-hydrodynamic analysis of a mechanical face seal [J]. Journal of Tribology, 1992, 114(4): 639-645
[20]	Etsion I, Groper M. The accuracy of analytical solution for the temperature distribution in mechanical face seals//14th International Conference on Fluid Sealing[C]. 1994: 341- 350
[21]	Zhu Xiaoping(朱孝平), Wang Jiugen(汪久根), Zhou Guiru(周桂如).Simplified calculation model of mechanical seal end face temperature [J]. Fluid Machinery(流体机械), 1995, 23(9) : 31-36
[22]	Cheng Jianhui(程建辉), Ge Peiqi(葛培琪), Liu Ming(刘鸣). FEM analysis and experimental study on temperature field of mechanical seal ring [J]. Journal of Shandong University(山东大学学报), 2002, 32(4): 385-388
[23]	Zhou Jianfeng(周剑锋), Gu Boqin(顾伯勤).Heat-transfer character analysis of rings of mechanical seal [J]. Journal of Mechanical Engineering(机械工程学报), 2006, 42(9): 201-206
[24]	Gao Jie(高杰), Song Pengyun(宋鹏云), Ma Fangbo(马方波), Zhao Jun(赵骏). A new approximate analytical method for calculating the face temperature of mechanical seals [J]. Lubrication Engineering(润滑与密封), 2012, 37(4):48-52
[25]	Chen Hui(陈辉), Hu Yuanzhong(胡元中), Wang Hui(王慧), Wang Wenzhong(王文中). Simulation and characterization of fractal rough surfaces [J]. Journal of Mechanical Engineering(机械工程学报), 2006, 42(9): 219-223
[26]	Wei Long(魏龙), Gu Boqin(顾伯勤), Feng Fei(冯飞), Feng Xiu(冯秀).Contact fractal model of friction face of mechanical seals [J]. CIESC Journal(化工学报), 2009, 60(10): 2543-2548
[27]	Wei Long(魏龙), Gu Boqin(顾伯勤), Zhang Penggao(张鹏高), Fang Guifang(房桂芳). Average film thickness prediction of end faces in contacting mechanical seals in running-in period [J]. CIESC Journal (化工学报), 2013, 64(11): 4137-4142
[28]	Wei Long(魏龙), Gu Boqin(顾伯勤), Sun Jianjun(孙见君), Feng Fei(冯飞), Feng Xiu(冯秀). Optimization of surface fractal dimension of friction pair in mechanical seals [J]. CIESC Journal(化工学报), 2010, 61(1):132-136
[29]	Wei Long(魏龙), Gu Boqin(顾伯勤), Zhang Penggao(张鹏高), Fang Guifang(房桂芳). Contact characterizations of end faces in mechanical seals running-in [J]. CIESC Journal(化工学报), 2012, 63(10): 3202-3207
[30]	Wei Long(魏龙), Gu Boqin(顾伯勤), Liu Qihe(刘其和), Zhang Penggao(张鹏高), Fang Guifang(房桂芳).Correction of contact fractal model for friction faces of mechanical seals [J]. CIESC Journal(化工学报), 2013, 64(5):1723-1729
[31]	Majumdar A, Bhushan B. Fractal model of elastic-plastic contact between rough surfaces [J]. ASME, Journal of Tribology, 1991, 113:1-11
[32]	Wei Long(魏龙), Liu Qihe(刘其和), Zhang Penggao(张鹏高). Sliding friction surface contact mechanics model based on fractal theory [J]. Journal of Mechanical Engineering(机械工程学报), 2012, 48(17): 106-113
[33]	Dong Lin(董霖), Zhang Yongxiang(张永相).The modification of M-B model for elastic-plastic contact between rough surfaces [J].Journal of Sichuan University of Science and Technology(四川工业学院学报), 2001, 20(2):4-7
[34]	Johnson K L.Contact Mechanics [M]. Cambridge: Cambridge University Press, 1985
[35]	Wang S, Komvopoulos K. Fractal theory of the interfacial temperature distribution in the slow sliding regime(Ⅱ): Multiple domains, elastoplastic contacts and applications [J]. Journal of Tribology, 1994, 116(4): 824-832