利用双螺杆挤出机溶解聚丙烯腈

doi:10.11949/j.issn.0438-1157.20141720

化工学报 ›› 2015, Vol. 66 ›› Issue (5): 1970-1975.DOI: 10.11949/j.issn.0438-1157.20141720

• 材料化学工程与纳米技术 • 上一篇下一篇

利用双螺杆挤出机溶解聚丙烯腈

赵圣尧^1,2, 朱波²

1 山东大学材料液态结构及其遗传性教育部重点实验室, 山东济南 250061;
2 山东大学碳纤维工程技术研究中心, 山东济南 250061

收稿日期:2014-11-18 修回日期:2015-02-07 出版日期:2015-05-05 发布日期:2015-05-05
通讯作者: 朱波
基金资助:
山东省博士基金项目(2008BS04019)。

Dissolving polyacrylonitrile with twin-screw extruder

ZHAO Shengyao^1,2, ZHU Bo²

1 Key Laboratory of Liquid Structure and Heredity of Materials, Ministry of Education, Shandong University, Jinan 250061, Shandong, China;
2 Carbon Fiber Engineering Research Center of Shandong Province, Shandong University, Jinan 250061, Shandong, China

Received:2014-11-18 Revised:2015-02-07 Online:2015-05-05 Published:2015-05-05
Supported by:
supported by the Doctoral Foundation of Shandong Province (2008BS04019).

摘要/Abstract

摘要： 为了提高生产效率,简化操作步骤,并制得质量稳定的高黏均分子量(M_η)聚丙烯腈(PAN)纺丝原液,研究了利用双螺杆挤出机溶解PAN的新方法。二阶螺杆采用T形搭配方式,并在出料口加装过滤装置。溶剂的选择在PAN溶解理论的基础上综合考虑了不同溶剂的溶解能力,找到了适合螺杆溶解要求的混合溶剂。同时将制得的溶液利用干喷湿纺工艺进行纺丝,得到线密度小、高强度的原丝,以验证此体系的可靠性。结果表明此溶解方式可以满足高性能PAN原丝的纺丝要求,同时产出溶液质量稳定且效率更高。

关键词: 双螺杆, 聚丙烯腈, 溶解, 化学反应器, 设计

Abstract: In order to improve production efficiency, simplify procedure, and produce polyacrylonitrile (PAN) spinning dope, which is stable and has high viscosity-average molecular weight (M_η), a new PAN dissolution method with twin-screw extruder was developed. A mode of T-combination was used to frame the second order twin-screw and a filter was installed in the outlet port. A mixed solvent suitable for screw extruder based on PAN dissolution theory and dissolution ability of solvents was selected. The dissolved PAN was used in dry jet wet spinning and high strength fiber with low linear density was made. The twin screw method of dissolving PAN satisfied high performance fiber production requirement, and the solution quality was stable and more productive.

Key words: twin screw extruder, pomlyacrylonitrile, dissolve, chemical reactors, design

中图分类号:

TQ340.61

赵圣尧, 朱波. 利用双螺杆挤出机溶解聚丙烯腈[J]. 化工学报, 2015, 66(5): 1970-1975.

ZHAO Shengyao, ZHU Bo. Dissolving polyacrylonitrile with twin-screw extruder[J]. CIESC Journal, 2015, 66(5): 1970-1975.

参考文献 23

[1]	Wang H, Wang Y, Li T, et al. Gradient distribution of radial structure of PAN-based carbon fiber treated by high temperature [J]. Progress in Natural Science: Materials International, 2014, 24(1): 31-34
[2]	Shimada I, Takahagi T, Fukuhara M, et al. FT-IR study of the stabilization reaction of polyacrylonitrile in the production of carbon fibers [J]. Journal of Polymer Science Part A: Polymer Chemistry, 1986, 24(8): 1989-1995
[3]	Rahaman M S A, Ismail A F, Mustafa A. A review of heat treatment on polyacrylonitrile fiber [J]. Polymer Degradation and Stability, 2007, 92(8): 1421-1432
[4]	Ulbricht M, Oechel A. Photo-bromination and photo-induced graft polymerization as a two-step approach for surface modification of polyacrylonitrile ultrafiltration membranes [J]. European Polymer Journal, 1996, 32(9): 1045-1054
[5]	Carder C H, Smith O W, Trecker D J. Two-step coating process[P]: US, 3935330. 1976-1-27
[6]	Rajalingam P, Radhakrishxan G. Polyacrylonitrile precursor for carbon fibers [J]. Journal of Macromolecular Science, Part C: Polymer Reviews, 1991, 31(2/3): 301-310
[7]	Nie H L, Ma Z H, Fan Z X, et al. Polyacrylonitrile fibers efficiently loaded with tamoxifen citrate using wet-spinning from co-dissolving solution [J]. International Journal of Pharmaceutics, 2009, 373(1): 4-9
[8]	Zhao Y, Wang C, Wang Y, et al. Aqueous deposited copolymerization of acrylonitrile and itaconic acid [J]. Journal of Applied Polymer Science, 2009, 111(6): 3163-3169
[9]	Evon P, Vandenbossche V, Rigal L. Manufacturing of renewable and biodegradable fiberboards from cake generated during biorefinery of sunflower whole plant in twin-screw extruder: influence of thermo-pressing conditions [J]. Polymer Degradation and Stability, 2012, 97(10): 1940-1947
[10]	Senanayake S, Clarke B. A simplified twin screw co-rotating food extruder: design, fabrication and testing [J]. Journal of Food Engineering, 1999, 40(1): 129-137
[11]	Harold F Giles Jr, John R Wagner Jr. Extrusion [M]. 2nd ed. New York: Crescent Associates, Inc., 2014: 125-148
[12]	Eitzlmayr A, Koscher G, Reynolds G, et al. Mechanistic modeling of modular co-rotating twin-screw extruders [J]. International Journal of Pharmaceutics, 2014, 474(1): 157-176
[13]	Maridass B, Gupta B R. Performance optimization of a counter rotating twin screw extruder for recycling natural rubber vulcanizates using response surface methodology [J]. Polymer Testing, 2004, 23(4): 377-385
[14]	Kumar A, Vercruysse J, Bellandi G, et al. Experimental investigation of granule size and shape dynamics in twin-screw granulation [J]. International Journal of Pharmaceutics, 2014, 475(1): 485-495
[15]	Garge S C, Wetzel M D, Ogunnaike B A. Quantification of the melting process in a co-rotating twin-screw extruder: a hybrid modeling approach [J]. Polymer Engineering & Science, 2007, 47(7): 1040-1051
[16]	Trifkovic M, Sheikhzadeh M, Choo K, et al. Model identification of a twin screw extruder for thermoplastic vulcanizate (TPV) applications [J]. Polymer Engineering & Science, 2010, 50(6): 1168-1177
[17]	Iedema P D, Remerie K, van der Ham M, et al. Controlled peroxide-induced degradation of polypropylene in a twin-screw extruder: change of molecular weight distribution under conditions controlled by micromixing [J]. Chemical Engineering Science, 2011, 66(22): 5474-5486
[18]	Mu B, Thompson M R. Examining the mechanics of granulation with a hot melt binder in a twin-screw extruder [J]. Chemical Engineering Science, 2012, 81: 46-56
[19]	Poulesquen A, Vergnes B. A study of residence time distribution in co-rotating twin-screw extruders(Ⅰ): theoretical modeling [J]. Polymer Engineering & Science, 2003, 43(12): 1841-1848
[20]	Vergnes B, Berzin F. Modeling of reactive systems in twin-screw extrusion: challenges and applications [J]. Comptes Rendus Chimie, 2006, 9(11): 1409-1418
[21]	Dhenge R M, Cartwright J J, Doughty D G, et al. Twin screw wet granulation: effect of powder feed rate[J]. Advanced Powder Technology, 2011, 22(2): 162-166
[22]	Nishio Y, Roy S K, Manley R. Blends of cellulose with polyacrylonitrile prepared from N, N-dimethylacetamide-lithium chloride solutions [J]. Polymer, 1987, 28(8): 1385-1390
[23]	Oya N, Johnson D J. Longitudinal compressive behavior and microstructure of PAN-based carbon fibers [J]. Carbon, 2001, 39(5): 635-645

利用双螺杆挤出机溶解聚丙烯腈

Dissolving polyacrylonitrile with twin-screw extruder

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 23

相关文章 15

编辑推荐

Metrics

本文评价

[1]	胡超, 董玉明, 张伟, 张红玲, 周鹏, 徐红彬. 浓硫酸活化五氧化二钒制备高浓度全钒液流电池正极电解液[J]. 化工学报, 2023, 74(S1): 338-345.
[2]	陈哲文, 魏俊杰, 张玉明. 超临界水煤气化耦合SOFC发电系统集成及其能量转化机制[J]. 化工学报, 2023, 74(9): 3888-3902.
[3]	齐聪, 丁子, 余杰, 汤茂清, 梁林. 基于选择吸收纳米薄膜的太阳能温差发电特性研究[J]. 化工学报, 2023, 74(9): 3921-3930.
[4]	车睿敏, 郑文秋, 王小宇, 李鑫, 许凤. 基于离子液体的纤维素均相加工研究进展[J]. 化工学报, 2023, 74(9): 3615-3627.
[5]	杨百玉, 寇悦, 姜峻韬, 詹亚力, 王庆宏, 陈春茂. 炼化碱渣湿式氧化预处理过程DOM的化学转化特征[J]. 化工学报, 2023, 74(9): 3912-3920.
[6]	于旭东, 李琪, 陈念粗, 杜理, 任思颖, 曾英. 三元体系KCl + CaCl₂ + H₂O 298.2、323.2及348.2 K相平衡研究及计算[J]. 化工学报, 2023, 74(8): 3256-3265.
[7]	郑玉圆, 葛志伟, 韩翔宇, 王亮, 陈海生. 中高温钙基材料热化学储热的研究进展与展望[J]. 化工学报, 2023, 74(8): 3171-3192.
[8]	文兆伦, 李沛睿, 张忠林, 杜晓, 侯起旺, 刘叶刚, 郝晓刚, 官国清. 基于自热再生的隔壁塔深冷空分工艺设计及优化[J]. 化工学报, 2023, 74(7): 2988-2998.
[9]	江锦波, 彭新, 许文烜, 门日秀, 刘畅, 彭旭东. 泵出型螺旋槽油气密封泄漏特性及参数影响研究[J]. 化工学报, 2023, 74(6): 2538-2554.
[10]	陈科, 杜理, 曾英, 任思颖, 于旭东. 四元体系LiCl+MgCl₂+CaCl₂+H₂O 323.2 K相平衡研究及计算[J]. 化工学报, 2023, 74(5): 1896-1903.
[11]	孙永尧, 高秋英, 曾文广, 王佳铭, 陈艺飞, 周永哲, 贺高红, 阮雪华. 面向含氮油田伴生气提质利用的膜耦合分离工艺设计优化[J]. 化工学报, 2023, 74(5): 2034-2045.
[12]	刘尚豪, 贾胜坤, 罗祎青, 袁希钢. 基于梯度提升决策树的三组元精馏流程结构最优化[J]. 化工学报, 2023, 74(5): 2075-2087.
[13]	周必茂, 许世森, 王肖肖, 刘刚, 李小宇, 任永强, 谭厚章. 烧嘴偏转角度对气化炉渣层分布特性的影响[J]. 化工学报, 2023, 74(5): 1939-1949.
[14]	王泽栋, 石至平, 刘丽艳. 考虑气泡非均匀耗散的矩形反应器声流场数值模拟及结构优化[J]. 化工学报, 2023, 74(5): 1965-1973.
[15]	李纪元, 李金旺, 周刘伟. 不同扰流结构冷板传热性能研究[J]. 化工学报, 2023, 74(4): 1474-1488.