气固环流反应器的研究进展

doi:10.3969/j.issn.0438-1157.2013.01.014

摘要/Abstract

摘要： 气固环流反应器是将气液环流理论与稠密气固流态化理论进行合理移植、耦合而形成的一种新型气固流化床反应器。对近年来国内外学者在该领域的研究进行了回顾,参考了内循环流化床的一些研究结果,对操作条件、几何结构对气固环流反应器内两相流体力学行为的影响规律进行了总结和分析,并对进一步的研究进行了展望。

关键词: 流态化, 气固流化床, 环流反应器, 流体力学, 热量传递

Abstract: Gas-solids airlift loop reactor (GSALR) is a novel gas-solids fluidized bed reactor by appropriately coupling gas-liquid airlift loop reactor and dense-phase gas-solids fluidization theory.The recent advances in GSALR are reviewed, referring to researches on internally circulating fluidized bed, and analyzing the influence of the operating condition and geometric configuration on gas-solids hydrodynamic behavior.Based on the discussion, future research direction is also given.

Key words: fluidization, gas-solids fluidized bed, airlift loop reactor, hydrodynamics, heat transfer

中图分类号:

TQ052.5

刘梦溪, 卢春喜, 时铭显. 气固环流反应器的研究进展[J]. 化工学报, 2013, 64(1): 116-123.

LIU Mengxi, LU Chunxi, SHI Mingxian. Advances in gas-solids airlift loop reactor[J]. CIESC Journal, 2013, 64(1): 116-123.

参考文献 48

[1]	Chisti M Y. Airlift Bioreactors[M].London:Elsevier Applied Science, 1989
[2]	Liu M X, Lu C X, Shi M X. Hydrodynamic behaviour of a gas-solid air-loop stripper[J].Chinese Journal of Chemical Engineering, 2004,12:55-59
[3]	Liu M X, Lu C X, Zhu X M, Xie J P, Shi M X.Bed density and circulation mass flowrate in a novel annulus-lifted gas-solid air loop reactor[J].Chemical Engineering Science, 2010,65(22):5830-5840
[4]	Xie D, Lim C J, Grace J R, Adris A E M.Gas and particle circulation in an internally circulating fluidized bed membrane reactor cold model[J].Chemical Engineering Science, 2009,64:2599-2606
[5]	Lee J M, Kim Y J, Kim S D.Catalytic coal gasification in an internally circulating fluidized bed reactor with draft tube[J].Applied Thermal Engineering, 1998,18:1013-1024
[6]	Kim S D, Kim Y H, Roh S A, Lee D H.Solid circulation characteristics in an internally circulating fluidized bed with orifice-type draft tube[J].Korean Journal of Chemical Engineering, 2002,19(5), 911-916
[7]	Choi Y T, Kim S D.Bubble characteristics in an internally circulating fluidized bed[J].Journal of Chemical Engineering Japan, 1991,24:195-202
[8]	Xie Jianping(谢建平).Study on flow behaviour of the annulus spargered gas-solid loop reactor[D].Beijing:China University of Petroleum, 2007
[9]	Yang W C, Margaritis P J, Keairns D L.Design of recirculating fluidized beds for commercial applications[J].AIChE Symp.Ser., 1978,74:218-228
[10]	Byung H S, Young T K, Sang D K.Circulation of solid and gas bypassing in an internally circulating fluidized bed with a draft tube[J].Chemical Engineering Journal, 1997,68:115-122
[11]	Jeon H J,Kim S D,Kim S J,Kong Y.Solid circulation and gas bypassing characteristics in a square internally circulating fluidized bed with draft tube[J].Chemical Engineering and Processing, 2008,47:2351-2360
[12]	Ahn H S, Lee W J, Kim S D, Song B H.Solid circulation and gas bypassing in an internally circulating fluidized bed with an orifice-type draft tube[J].Korean Journal of Chemical Engineering, 1999,16(5):618-623
[13]	Claflin J K, Fane A G.Spouting with a porous draft-tube[J].Canadian Journal of Chemical Engineering, 1983,61:356-363
[14]	Song B H, Young T K, Sang D K.Circulation of solid and gas bypassing in an internally circulating fluidized bed with a draft tube[J].Chemical Engineering Journal,1997,68:115-122
[15]	Shih H H, Chu C Y, Hwang S J.Solids circulation and attrition rates and gas bypassing in an internally circulating fluidized bed[J].Industrial Engineering Chemical Research,2003,42:5915-5923
[16]	Chandel M K, Alappat B J.Pressure drop and gas bypassing in recirculating fluidized beds[J].Chemical Engineering Science, 2006,61:1489-1499
[17]	Liu Mengxi(刘梦溪), Lu Chunxi(卢春喜).Study of new kind of stripper[J].Petrochemical Technology(石油化工), 2001,30(11):850-854
[18]	Zhu Xiaoming(朱效明).Study on the configuration of the annulus lifted gas-solid air loop reactor[D].Beijing:China University of Petroleum, 2005
[19]	Liu Mengxi(刘梦溪), Niu Zhanchuan(牛占川), Lu Chunxi(卢春喜), Wang Zhu’an(王祝安).Affect of draft tube gas distributor on hydrodynamics in an annulus-lifted gas-solid air loop reactor[J].CIESC Journal(化工学报), 2010,61(9):2250-2256
[20]	Liu Mengxi(刘梦溪), Lu Chunxi(卢春喜), Shi Mingxian(时铭显).Hydrodynamics and mass transfer characteristics of a novel two-stage internal airlift loop reactor[J].The Chinese Journal of Processing Engineering(过程工程学报), 2006,6(2):398-402
[21]	Liu Mengxi(刘梦溪), Xie Jianping(谢建平),Lu Chunxi(卢春喜), Wang Zhu’an(王祝安).Theoretical analysis of hydrodynamics in novel gas-solid annulus-spargered airlift loop reactor[J].Journal of Chemical Industry and Engineering(China)(化工学报),2008,59(9):2198-2205
[22]	Liu Mengxi(刘梦溪), Lu Chunxi(卢春喜), Shi Mingxian(时铭显).Particle velocity distribution in a single stage high level gas-solid annular flow stripper[J].Petrochemical Technology(石油化工), 2002,31(10):815-819
[23]	Zhu Xiaoming(朱效明),Liu Mengxi(刘梦溪), Lu Chunxi(卢春喜), Wang Zhu’an(王祝安).Characteristics of solid velocity in an annulus-lifted gas-solid loop reactor[J].Chemical Reaction Engineering Technology(化学反应工程与工艺), 2008,24(4):295-300
[24]	Wang Dewu(王德武), Yan Chaoyu(严超宇), Lu Chunxi(卢春喜).Effect of distributor types on the hydrodynamics behavior in a compound gas-solid airlift loop reactor[J].Petroleum Processing and Petrochemicals(石油炼制与化工), 2011,42(5):50-56
[25]	Liu Mengxi(刘梦溪).Research on a novel gas-solid airlift loop reactor with two draft tubes[D].Beijing:China University of Petroleum, 2001
[26]	Zhao X L, Yao Q, Li S Q.Effects of draft tubes on particle velocity profiles in spouted beds[J].Chemical Engineering Technology,2006,29:875-881
[27]	Milne B J, Berruti F, Behie L A, De Bruijn T J W.The internally circulating fluidized bed:a novel solution to gas bypassing in spouted beds[J].Canadian Journal of Chemical Engineering, 1992,70:910-915
[28]	Ishikura T, Nagashima H, Ide M.Hydrodynamics of a spouted bed with a porous draft tube containing a small amount of finer particles[J].Powder Technology, 2003,131:56-65
[29]	Chu C Y, Hwang S J.Attrition and sulfation of calcium sorbent and solids circulation rate in an internally circulating fluidized bed[J].Powder Technology, 2002,127:185-195
[30]	Berruti F, Muir J R, Behie L A.Solids circulation in a spout-fluid bed with draft tube[J].Canadian Journal of Chemical Engineering, 1988,66:919-923
[31]	Alappat B J, Rane V C.Studies on the effects of various design and operational parameters on solid circulation rate in a recirculating fluidized bed[J].Canadian Journal of Chemical Engineering, 1995,73(4):248-252
[32]	Yan C Y, Lu C X, Zhang Y M, Wang D W, Liu M X.Profiles of solid fraction and heterogeneous phase structure in a gas-solid airlift loop reactor[J].Chemical Engineering Science, 2010,65(22):5830-5840
[33]	Konduri R K, Altwicker E R, Morgan III M H.Design and scale-up of a spouted-bed combustor[J].Chemical Engineering Science, 1999,54:185-204
[34]	Zhang Yongmin(张永民), Lu Chunxi(卢春喜), Shi Mingxian(时铭显).Large-scale cold pilot experiment on a new annular catalyst stripper for FCC units[J].Journal of Chemical Engineering of Chinese Universities(高校化学工程学报), 2004,18(3):377-380
[35]	Liu Xiancheng(刘显成), Lu Chunxi(卢春喜), Shi Mingxian(时铭显).Study on heat transfer between gas-solids suspension and the surfaces of two draft tubes in an airlift loop heat exchanger[J].The Chinese Journal of Process Engineering(过程工程学报), 2004,4(Suppl.):611-618
[36]	Liu Xiancheng(刘显成), Lu Chunxi(卢春喜), Shi Mingxian(时铭显).An airlift loop heat exchanger[P]:CN,1627035.2005
[37]	Sun Fuwei(孙富伟).Study and development of new FCC regenerated catalyst coolers with inner particle circulation[D].Beijing:China University of Petroleum, 2011
[38]	Ozkaynak T F, Chen J C.Emulsion phase residence time and its use in heat transfer models in fluidized beds[J].AIChE Journal, 1980,26(4):544-550
[39]	Lu Chunxi(卢春喜), Xu Guiming(徐桂明), Lu Shuigen(卢水根), Shi Mingxian(时铭显).Study and industry application of a pre-stripping separation system for riser termination of FCCU[J].Petroleum Processing and Petrochemicals(石油炼制与化工), 2002,33(1):33-37
[40]	Lu Chunxi(卢春喜), Shi Mingxian(时铭显).Novel catalytic cracking riser termination devices in China[J].Petrochemical Technology & Application(石化技术与应用), 2007,25(2):142-146
[41]	Xu Kewei(许可为).Revamping of FCC unit with CSC rapid-separation technology[J].Petroleum Refinery Engineering(炼油技术与工程), 2005,35(5):11-13
[42]	Lu Chunxi(卢春喜), Liu Weimin(刘为民), Gao Jinsen(高金森), Xu Chunming(徐春明), Mao Yu(毛羽), Shi Mingxian(时铭显).Integrated technique and application of heavy oil catalytic cracking reaction system[J].Petrochemical Technology &Application(石化技术与应用), 2006,24(1):1-4
[43]	Xu Kejia(许克家).Study on dense-phase airlift loop stripper for quick separator of riser of FCC[D].Beijing :China University of Petroleum, 1998
[44]	Liu Mengxi(刘梦溪), Lu Chunxi(卢春喜), Wang Zhu’an(王祝安).Combined catalyst stripper[P]:CN,10111267. 2008
[45]	Li Peng(李鹏), Liu Mengxi(刘梦溪), Han Shouzhi(韩守知), Lu Chunxi(卢春喜).Commercialization of disc and donut airlift loop hybrid stripper in fluidized bed catalytic cracking unit of Yangzi Petrochemical Company[J].Petrochemical Technology & Application(石化技术与应用), 2009,27(1):32-35
[46]	Gao J S, Chang J, Lan X Y, Yang Y, Lu C X, Xu C M.CFD modeling of mass transfer and stripping efficiency in FCCU strippers[J].AIChE Journal, 2008,54(5 ):1164-1177
[47]	Lu Chunxi(卢春喜), Wang Dewu(王德武), Gao Jinsen(高金森), Wang Zhu’an(王祝安).A riser and gas-solid loop coupled reaction equipment[P]:CN, 200810084405. 2. 2008-09-10
[48]	Wang Dewu(王德武), Lu Chunxi(卢春喜).Distributions of solids hold-up in the airlift loop fluidized bed of a riser-airlift loop fluidized bed coupled reactor[J].The Chinese Journal of Process Engineering(过程工程学报), 2008,8(6):1051-1056

编辑推荐 0

Metrics

阅读次数

全文

1196

HTML			PDF

最新录用	在线预览	正式出版	最新录用	在线预览	正式出版
0	0	0	0	0	1196

来源	本网站	其他网站

次数	214	982
比例	18%	82%

摘要

2440

最新录用	在线预览	正式出版

0	0	2440

来源	本网站	其他网站

次数	153	2287
比例	6%	94%