化工学报 ›› 2015, Vol. 66 ›› Issue (5): 1970-1975.DOI: 10.11949/j.issn.0438-1157.20141720

• 材料化学工程与纳米技术 • 上一篇    下一篇

利用双螺杆挤出机溶解聚丙烯腈

赵圣尧1,2, 朱波2   

  1. 1 山东大学材料液态结构及其遗传性教育部重点实验室, 山东 济南 250061;
    2 山东大学碳纤维工程技术研究中心, 山东 济南 250061
  • 收稿日期:2014-11-18 修回日期:2015-02-07 出版日期:2015-05-05 发布日期:2015-05-05
  • 通讯作者: 朱波
  • 基金资助:
    山东省博士基金项目(2008BS04019)。

Dissolving polyacrylonitrile with twin-screw extruder

ZHAO Shengyao1,2, ZHU Bo2   

  1. 1 Key Laboratory of Liquid Structure and Heredity of Materials, Ministry of Education, Shandong University, Jinan 250061, Shandong, China;
    2 Carbon Fiber Engineering Research Center of Shandong Province, Shandong University, Jinan 250061, Shandong, China
  • Received:2014-11-18 Revised:2015-02-07 Online:2015-05-05 Published:2015-05-05
  • Supported by:
    supported by the Doctoral Foundation of Shandong Province (2008BS04019).

摘要: 为了提高生产效率,简化操作步骤,并制得质量稳定的高黏均分子量(Mη)聚丙烯腈(PAN)纺丝原液,研究了利用双螺杆挤出机溶解PAN的新方法。二阶螺杆采用T形搭配方式,并在出料口加装过滤装置。溶剂的选择在PAN溶解理论的基础上综合考虑了不同溶剂的溶解能力,找到了适合螺杆溶解要求的混合溶剂。同时将制得的溶液利用干喷湿纺工艺进行纺丝,得到线密度小、高强度的原丝,以验证此体系的可靠性。结果表明此溶解方式可以满足高性能PAN原丝的纺丝要求,同时产出溶液质量稳定且效率更高。

关键词: 双螺杆, 聚丙烯腈, 溶解, 化学反应器, 设计

Abstract: In order to improve production efficiency, simplify procedure, and produce polyacrylonitrile (PAN) spinning dope, which is stable and has high viscosity-average molecular weight (Mη), a new PAN dissolution method with twin-screw extruder was developed. A mode of T-combination was used to frame the second order twin-screw and a filter was installed in the outlet port. A mixed solvent suitable for screw extruder based on PAN dissolution theory and dissolution ability of solvents was selected. The dissolved PAN was used in dry jet wet spinning and high strength fiber with low linear density was made. The twin screw method of dissolving PAN satisfied high performance fiber production requirement, and the solution quality was stable and more productive.

Key words: twin screw extruder, pomlyacrylonitrile, dissolve, chemical reactors, design

中图分类号: