水性聚氨酯膜渗透蒸发分离苯/环己烷的条件及过程

doi:10.11949/j.issn.0438-1157.20151807

化工学报 ›› 2016, Vol. 67 ›› Issue (S1): 289-295.DOI: 10.11949/j.issn.0438-1157.20151807

水性聚氨酯膜渗透蒸发分离苯/环己烷的条件及过程

姚路路, 叶辉, 宋影, 崔鹏

合肥工业大学化学与化工学院, 安徽合肥 230009

收稿日期:2015-12-01 修回日期:2015-12-15 出版日期:2016-08-31 发布日期:2016-08-31
通讯作者: 崔鹏,cuip2000@sina.com
基金资助:
国家自然科学基金项目（21476055）。

Conditions and process of pervaporation benzene/cyclohexane mixture by waterborne polyurethane membranes

YAO Lulu, YE Hui, SONG Ying, CUI Peng

School of Chemistry and Chemical Engineering, Hefei University of Technology, Hefei 230009, Anhui, China

Received:2015-12-01 Revised:2015-12-15 Online:2016-08-31 Published:2016-08-31
Supported by:
supported by the National Natural Science Foundation of China (21476055).

摘要/Abstract

摘要：

以聚己二酸1，4-丁二醇酯二醇（PBA-2000）和甲苯二异氰酸酯（TDI）为主要原料合成水性聚氨酯膜，并对苯/环己烷混合液渗透蒸发性能进行测试，讨论了苯/环己烷混合体系的渗透蒸发分离过程特点。结果表明，当膜厚度增大时，分离因子提高而渗透通量随之下降，这个变化趋势在膜较薄时很明显，达到一定厚度后则变化比较平缓；膜下游侧真空度提高会同时提高膜的分离因子和通量；增大料液中苯的浓度，提高料液温度会提高通量并降低分离因子。液体被分离组分在渗透蒸发膜中经历了吸附溶胀-膜内汽化-气体扩散的质量传递过程，“干区”对分离的影响作用更加显著。

关键词: 水性聚氨酯, 膜, 渗透蒸发, 苯/环己烷, 传递过程

Abstract:

The waterborne polyurethane membrane was synthesized with poly-1,4-butylene adipate glycol (PBA-2000) and toluene diisocyanate (TDI) and the properties of pervaporation benzene/cyclohexane mixture were tested to study the mass transfer characteristics during pervaporation process. From experimental data it can be concluded that the separation factor and flux should get bigger and smaller obviously as the membrane is very thin. And the variation of separation factor and flux was slight as the membrane thickness was certain thick. The improvement of downstream vacuum of the membrane should improve both the separation factor and flux. The bigger feed concentration and temperature should increase the flux and decrease the separation factor. The components in the pervaporation membrane should undergo the course of adsorbing swelling-evaporation in membrane-gaseous diffusion. The dry region of the membrane plays more effect during the pervaporation process.

Key words: waterborne polyurethane, membrane, pervaporation, benzene/cyclohexane, transport processes

中图分类号:

TQ028.8

姚路路, 叶辉, 宋影, 崔鹏. 水性聚氨酯膜渗透蒸发分离苯/环己烷的条件及过程[J]. 化工学报, 2016, 67(S1): 289-295.

YAO Lulu, YE Hui, SONG Ying, CUI Peng. Conditions and process of pervaporation benzene/cyclohexane mixture by waterborne polyurethane membranes[J]. CIESC Journal, 2016, 67(S1): 289-295.

参考文献 20

[1]	王学松,郑领英.膜技术[M].2版. 北京:化学工业出版社, 2013:24. WANG X S,ZHENG L Y. Membrane Technology[M].2nd ed. Beijing:Chemical Industry Press, 2013:24.
[2]	YE H, LI J D, LIN Y Z, et al. Preparation and pervaporation performances of PEA-based polyurethaneurea and polyurethaneimide membranes to benzene/cyclohexane mixture[J]. J. Macromol. Sci. A, 2008, 45:563-571.
[3]	WEE S L, TYE C T, BHATIA S, et al. Membrane separation process-pervaporation through zeolite membrane[J]. Sep. Purif. Technol., 2008, 63:500-516.
[4]	ZHAO C H, WU H, LI X S, et al. High performance composite membranes with a polycarbophil calcium transition layer for pervaporation dehydration of ethanol[J]. J. Membrane Sci., 2013, 429:409-417.
[5]	YI S L, SU Y, WAN Y H. Preparation and characterization of vinyltriethoxysilane (VTES) modified silicalite-1/PDMS hybrid pervaporation membrane and its application in ethanol/separation from dilute aqueous solution[J]. J. Membrane Sci., 2010, 360:341-351.
[6]	PIERRE S, CATHERINE V, QUANG T N, et al. A simplified solutin-diffusion theory in pervaporation:the total solvent volume fraction model[J]. J. Membrane Sci., 2004, 224:117-127.
[7]	LUE S J, PENG S H. Polyurethane(PU) membrane preparation with and without hydroxypropyl-β-cyclodextrin and their pervaporation characteristics[J]. J. Membrane Sci., 2003, 222:203-217.
[8]	王湛,周翀.膜分离技术基础[M].2版. 北京:化学工业出版社, 2006:360. WANG Z, ZHOU C. Membrane Separation Technology[M]. 2nd ed. Beijing:Chemical Industry Press, 2006:360.
[9]	姜忠义,李多,彭福兵. 渗透蒸发传质理论与模型(Ⅰ):穿膜传质模型[J]. 膜科学与技术,2003, 23(2):37-41. JIANG Z Y,LI D,PENG F B. Mass transfer theories and models for pervaporation(Ⅰ):Models for trans-membrane mass transfer[J]. Membr. Sci. Tech., 2003, 23(2):37-41.
[10]	WOLINSK G A. Effect of the hard segment domains on the permeation and separation ability of the polyurethane-based membranes in benzene/cyclohexane separation by pervaporation[J]. J. Membrane Sci., 2006, 282:225-236.
[11]	叶宏, 王丹,陈剑,李继定. 改性聚氨酯膜的制备及渗透汽化苯/环己烷分离性能[J]. 高分子材料科学与工程,2009, 25(10):91-93,97. YE H, WANG D, CHEN J, et al. Preparation of modified polyurethane membranes and their pervaporation performances to benzene/cyclohexane mixture[J]. Polymer Mater. Sci. & Eng., 2009, 25(10):91-93,97.
[12]	叶宏,李继定,林阳政,等. PEA型聚氨酯膜的制备及渗透汽化苯/环己烷的分离性能[J]. 高分子材料科学与工程,2009, 25(3):103-106. YE H, LI J D, LIN Z Y, et al. Preparation of PEA-based polyurethane membranes and their pervaporation performances to benzene/cyclohexane mixture[J]. Polymer Mater. Sci. & Eng., 2009, 25(3):103-106.
[13]	KATSUKI K, SEIKI Y, SHIGEHARU M. Separation of benzene/cyclohexane mixture using polyurethane-silica hybrid membrans[J]. J. Membrane Sci., 1998, 149:29-37.
[14]	MUSZYNSKI J, WOLINSKA G A, PENCZEK P. Synthesis, characterization, and pervaporation properties of segmented poly(urethane-urea)s[J]. J. Appl. Polym. Sci., 1999, 71:1615-1625
[15]	DONG Y Q, GUO H B, SU Z X, et al. Pervaporation separation of benzene/cyclohexane through AAOM-ionic liquids/polyurethane membranes[J]. Chem. Eng. Process., 2015, 89:62-69.
[16]	许戈文. 水性聚氨酯材料[M]. 北京:化学工业出版社, 2006:2. XU G W. Waterborne Polyurethane Material[M]. Beijing:Chemical Industry Press, 2006:2.
[17]	宋影,姚路路,王泽,等. 水性聚氨酯膜的制备及渗透汽化分离苯/环己烷[J]. 高分子材料科学与工程,2015,31(12):21-27,31. SONG Y, YAO L L,WANG Z, et al. Preparation of waterborne polyurethane membranes and pervaporation performances to separate benzene/cyclohexane[J]. Polymer Mater. Sci. & Eng., 2015,31(12):21-27,31.
[18]	张秋根,陈瑜,陈建华,等. 新型聚乙烯醇/硅系杂花膜的制备及渗透性能[J]. 化工学报,2007, 58(5):1238-1243. ZHANG Q G, CHEN Y, CHEN J H, et al. Preparation and permeation characteristics of novel PVA/APTEOS hybrid membranes[J]. Journal of Chemical Industry and Engineering (China), 2007,58(5):1238-1243.
[19]	JOSE V B, VIRTUDES N B, PATRICIA V, et al. Addition of nanosilicas with different silane content to thermoplastic polyurethane adhesives[J]. Int. J. Adhes. Adhes., 2006, 26(5):378-387.
[20]	宁超峰, 何春清, 张明, 等. 用正电子湮没谱研究聚酯型聚氨酯的微观结构和自由体积特性[J]. 高分子学报,2001, (3):299-305. NING C F, HE C Q, ZHANG M, et al. Micro-structure and free volume properties of linear polyurethanes measured by using positron annihilation spectroscopy[J]. Acta Polym. Sin., 2001, (3):299-305.

水性聚氨酯膜渗透蒸发分离苯/环己烷的条件及过程

Conditions and process of pervaporation benzene/cyclohexane mixture by waterborne polyurethane membranes

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献 20

相关文章 15

编辑推荐

Metrics

本文评价

[1]	邵苛苛, 宋孟杰, 江正勇, 张旋, 张龙, 高润淼, 甄泽康. 水平方向上冰中受陷气泡形成和分布实验研究[J]. 化工学报, 2023, 74(S1): 161-164.
[2]	王志国, 薛孟, 董芋双, 张田震, 秦晓凯, 韩强. 基于裂隙粗糙性表征方法的地热岩体热流耦合数值模拟与分析[J]. 化工学报, 2023, 74(S1): 223-234.
[3]	吴延鹏, 李晓宇, 钟乔洋. 静电纺丝纳米纤维双疏膜油性细颗粒物过滤性能实验分析[J]. 化工学报, 2023, 74(S1): 259-264.
[4]	李艺彤, 郭航, 陈浩, 叶芳. 催化剂非均匀分布的质子交换膜燃料电池操作条件研究[J]. 化工学报, 2023, 74(9): 3831-3840.
[5]	胡建波, 刘洪超, 胡齐, 黄美英, 宋先雨, 赵双良. 有机笼跨细胞膜易位行为的分子动力学模拟研究[J]. 化工学报, 2023, 74(9): 3756-3765.
[6]	齐聪, 丁子, 余杰, 汤茂清, 梁林. 基于选择吸收纳米薄膜的太阳能温差发电特性研究[J]. 化工学报, 2023, 74(9): 3921-3930.
[7]	何松, 刘乔迈, 谢广烁, 王斯民, 肖娟. 高浓度水煤浆管道气膜减阻两相流模拟及代理辅助优化[J]. 化工学报, 2023, 74(9): 3766-3774.
[8]	胡亚丽, 胡军勇, 马素霞, 孙禹坤, 谭学诣, 黄佳欣, 杨奉源. 逆电渗析热机新型工质开发及电化学特性研究[J]. 化工学报, 2023, 74(8): 3513-3521.
[9]	张佳怡, 何佳莉, 谢江鹏, 王健, 赵鹬, 张栋强. 渗透汽化技术用于锂电池生产中N-甲基吡咯烷酮回收的研究进展[J]. 化工学报, 2023, 74(8): 3203-3215.
[10]	张贲, 王松柏, 魏子亚, 郝婷婷, 马学虎, 温荣福. 超亲水多孔金属结构驱动的毛细液膜冷凝及传热强化[J]. 化工学报, 2023, 74(7): 2824-2835.
[11]	韩奎奎, 谭湘龙, 李金芝, 杨婷, 张春, 张永汾, 刘洪全, 于中伟, 顾学红. 四通道中空纤维MFI分子筛膜用于二甲苯异构体分离[J]. 化工学报, 2023, 74(6): 2468-2476.
[12]	蔡斌, 张效林, 罗倩, 党江涛, 左栗源, 刘欣梅. 导电薄膜材料的研究进展[J]. 化工学报, 2023, 74(6): 2308-2321.
[13]	王光宇, 张锴, 张凯华, 张东柯. 微波加热干燥煤泥热质传递及其能耗特性分析[J]. 化工学报, 2023, 74(6): 2382-2390.
[14]	陈朝光, 贾玉香, 汪锰. 以低浓度废酸驱动中和渗析脱盐的模拟与验证[J]. 化工学报, 2023, 74(6): 2486-2494.
[15]	顾浩, 张福建, 刘珍, 周文轩, 张鹏, 张忠强. 力电耦合作用下多孔石墨烯膜时间维度的脱盐性能及机理研究[J]. 化工学报, 2023, 74(5): 2067-2074.