• •
李泓宇(), 刘祥坤, 施尧, 曹约强, 钱刚(
), 段学志
收稿日期:
2024-04-12
修回日期:
2024-06-07
出版日期:
2024-06-25
通讯作者:
钱刚
作者简介:
李泓宇(1998—),男,硕士研究生,18795907997@163.com
基金资助:
Hongyu LI(), Xiangkun LIU, Yao SHI, Yueqiang CAO, Gang QIAN(
), Xuezhi DUAN
Received:
2024-04-12
Revised:
2024-06-07
Online:
2024-06-25
Contact:
Gang QIAN
摘要:
乙烯产量是反映国家石油化工发展水平的关键指标。构建了颗粒分辨的乙炔选择性加氢固定床反应器模型,分析了圆柱形颗粒堆积结构对传递过程以及操作条件对其反应性能的影响。结果表明,床层压降主要集中在反应器入口段,该段乙炔加氢反应速率最高,但在后半段催化剂颗粒未被充分利用,且反应器内存在明显的径向温度梯度。入口压力的增加和空速的降低均有利于提升乙炔转化率,但同时会降低乙烯选择性,其中乙烯选择性对压力更敏感,而乙炔转化率对空速更敏感;反应温度和氢炔比的提高均有利于促进乙炔生成乙烯的速率,但会导致乙烯富集在催化剂颗粒的外表面,其进一步向颗粒内部扩散时过度加氢生成乙烷,降低了乙烯的选择性。
中图分类号:
李泓宇, 刘祥坤, 施尧, 曹约强, 钱刚, 段学志. 颗粒分辨的乙炔选择性加氢固定床反应器数值模拟[J]. 化工学报, DOI: 10.11949/0438-1157.20240406.
Hongyu LI, Xiangkun LIU, Yao SHI, Yueqiang CAO, Gang QIAN, Xuezhi DUAN. Numerical simulation of particle-resolved fixed-bed reactor for selective acetylene hydrogenation process[J]. CIESC Journal, DOI: 10.11949/0438-1157.20240406.
分子 | 值 |
---|---|
C2H2 | 36.42 |
H2 | 6.12 |
C2H4 | 41.01 |
C2H6 | 45.66 |
C3H8 | 65.34 |
C4H8 | 82.08 |
Ar | 16.1 |
表1 模拟中所用的扩散体积[35]
Table 1 Diffusion volumes used in simulation[35]
分子 | 值 |
---|---|
C2H2 | 36.42 |
H2 | 6.12 |
C2H4 | 41.01 |
C2H6 | 45.66 |
C3H8 | 65.34 |
C4H8 | 82.08 |
Ar | 16.1 |
物性 | 经验公式 | 文献 |
---|---|---|
催化剂粉末热导率 | [ | |
气体混合物热导率 | [ | |
物质i和物质j的二元黏度 | [ | |
气体混合物比热容 | [ | |
气体混合物密度 | [ | |
气体混合物平均摩尔质量 | [ | |
反应热 | [ |
表2 模型中所用的计算经验方程式
Table 2 Empirical equations used in simulation
物性 | 经验公式 | 文献 |
---|---|---|
催化剂粉末热导率 | [ | |
气体混合物热导率 | [ | |
物质i和物质j的二元黏度 | [ | |
气体混合物比热容 | [ | |
气体混合物密度 | [ | |
气体混合物平均摩尔质量 | [ | |
反应热 | [ |
位置 | 动量方程 | 质量方程 | 能量方程 |
---|---|---|---|
反应器入口 ( | |||
反应器出口 ( | |||
反应器管壁( | |||
颗粒与流体交界面 | - |
表3 求解方程(12)、(13)、(14)、(16)和(17)使用的边界条件
Table 3 Boundary conditions for solving Eq. (12), (13), (14), (16) and (17)
位置 | 动量方程 | 质量方程 | 能量方程 |
---|---|---|---|
反应器入口 ( | |||
反应器出口 ( | |||
反应器管壁( | |||
颗粒与流体交界面 | - |
图5 反应器中心纵截面和横截面(30 mm处)的C2H2浓度分布(a)和反应器轴向C2H2浓度分布(b)
Fig. 5 Central longitudinal and cross-sectional (30 mm) C2H2 concentration distribution (a) and C2H2 concentration along axial direction of reactor (b)
图6 反应器中心纵截面和横截面(40 mm处)的温度分布(a)和反应器轴向温度分布(b)
Fig. 6 Central longitudinal and cross-sectional (40 mm) temperature distribution (a) and temperature distribution along axial direction of reactor (b)
图7 反应器中心纵截面的温度分布(a),反应器轴向温度(b),反应器中心纵截面的C2H2浓度分布(c),反应器轴向C2H2浓度分布(d)和C2H2转化率和C2H4选择性随压力的变化(e)
Fig. 7 Central longitudinal temperature distribution (a), temperature along axial direction of reactor (b), central longitudinal C2H2 concentration distribution (c), C2H2 concentration along axial direction of reactor (d) and C2H2 conversion and C2H4 selectivity with respect to pressure (e)
图8 反应器中心纵截面的温度分布(a),反应器轴向温度(b),反应器中心纵截面的C2H2浓度分布(c),反应器轴向C2H2浓度分布(d)和C2H2转化率和C2H4选择性随空速的变化(e)
Fig. 8 Central longitudinal temperature distribution (a), temperature along axial direction of reactor (b), central longitudinal C2H2 concentration distribution (c), C2H2 concentration along axial direction of reactor (d) and C2H2 conversion and C2H4 selectivity with respect to GHSV (e)
图9 反应器中心纵截面的温度分布(a),反应器轴向温度(b),反应器中心纵截面的C2H2浓度分布(c),反应器轴向C2H2浓度分布(d)和C2H2转化率和C2H4选择性随入口温度的变化(e)
Fig. 9 Central longitudinal temperature distribution (a), temperature along axial direction of reactor (b), central longitudinal C2H2 concentration distribution (c), C2H2 concentration along axial direction of reactor (d) and C2H2 conversion and C2H4 selectivity with respect to inlet temperature (e)
图10 反应器中心纵截面的温度分布(a),反应器轴向温度(b),反应器中心纵截面的C2H2浓度分布(c),反应器轴向C2H2浓度分布(d)和C2H2转化率和C2H4选择性随氢炔比的变化(e)
Fig. 10 Central longitudinal temperature distribution (a), temperature along axial direction of reactor (b), central longitudinal C2H2 concentration distribution (c), C2H2 concentration along axial direction of reactor (d) and C2H2 conversion and C2H4 selectivity with respect to hydrogen-acetylene ratio (e)
1 | Borodziński A, Bond G C. Selective hydrogenation of ethyne in ethene-rich streams on palladium catalysts. part 1. effect of changes to the catalyst during reaction[J]. Catalysis Reviews, 2006, 48(2): 91-144. |
2 | Dehghani O, Rahimpour M R, Shariati A. An experimental approach on industrial Pd-Ag supported α-Al2O3 catalyst used in acetylene hydrogenation process: mechanism, kinetic and catalyst decay[J]. Processes, 2019, 7(3): 136. |
3 | 张谦温, 刘新香, 朱起明. 炔烃和二烯烃选择加氢现状与发展[J]. 石油化工, 1998, 27(1): 53-58. |
Zhang Q W, Liu X X, Zhu Q M. Present situation and development of selective hydrogenation of alkynes and dienes[J]. Petrochemical Technology, 1998, 27(1): 53-58. | |
4 | Takht Ravanchi M, Sahebdelfar S. Pd-Ag/Al2O3 catalyst: Stages of deactivation in tail-end acetylene selective hydrogenation[J]. Applied Catalysis A: General, 2016, 525: 197-203. |
5 | Aeowjaroenlap H, Chotiwiriyakun K, Tiensai N, et al. Model-based optimization of an acetylene hydrogenation reactor to improve overall ethylene plant economics[J]. Industrial & Engineering Chemistry Research, 2018, 57(30): 9943-9951. |
6 | Dehghani O, Bolhasani A, Hosseini S, et al. Process intensification of selective acetylene hydrogenation reactor by bed configuration change: a case study of an ethylene plant[J]. Case Studies in Chemical and Environmental Engineering, 2023, 7: 100321. |
7 | Dehghani Khold O, Parhoudeh M, Rahimpour M R, et al. A new configuration in the tail-end acetylene hydrogenation reactor to enhance catalyst lifetime and performance[J]. Journal of the Taiwan Institute of Chemical Engineers, 2016, 65: 8-21. |
8 | Szukiewicz M, Kaczmarski K, Petrus R. Modelling of fixed-bed reactor: two models of industrial reactor for selective hydrogenation of acetylene[J]. Chemical Engineering Science, 1998, 53(1): 149-155. |
9 | Ge X H, Cao Y Q, Yan K L, et al. Increasing the distance of adjacent palladium atoms for configuration matching in selective hydrogenation[J]. Angewandte Chemie International Edition, 2022, 61(51): e202215225. |
10 | Ge X H, Dou M Y, Cao Y Q, et al. Mechanism driven design of trimer Ni1Sb2 site delivering superior hydrogenation selectivity to ethylene[J]. Nature Communications, 2022, 13: 5534. |
11 | Cao Y Q, Zhang H, Ji S F, et al. Adsorption site regulation to guide atomic design of Ni-Ga catalysts for acetylene[J]. Angewandte Chemie International Edition, 2020, 59(28): 11647-11652. |
12 | Takht Ravanchi M, Sahebdelfar S, Komeili S. Acetylene selective hydrogenation: a technical review on catalytic aspects[J]. Reviews in Chemical Engineering, 2018, 34(2): 215-237. |
13 | McCue A J, Anderson J A. Recent advances in selective acetylene hydrogenation using palladium containing catalysts[J]. Frontiers of Chemical Science and Engineering, 2015, 9(2): 142-153. |
14 | Zhang L L, Zhou M X, Wang A Q, et al. Selective hydrogenation over supported metal catalysts: from nanoparticles to single atoms[J]. Chemical Reviews, 2020, 120(2): 683-733. |
15 | Wang Z, Luo Q, Mao S J, et al. Fundamental aspects of alkyne semi-hydrogenation over heterogeneous catalysts[J]. Nano Research, 2022, 15(12): 10044-10062. |
16 | Asplund S. Coke formation and its effect on internal mass transfer and selectivity in Pd-catalysed acetylene hydrogenation[J]. Journal of Catalysis, 1996, 158(1): 267-278. |
17 | Jurtz N, Kraume M, Wehinger G D. Advances in fixed-bed reactor modeling using particle-resolved computational fluid dynamics (CFD)[J]. Reviews in Chemical Engineering, 2019, 35(2): 139-190. |
18 | Partopour B, Dixon A G. 110th anniversary: commentary: CFD as a modeling tool for fixed bed reactors[J]. Industrial & Engineering Chemistry Research, 2019, 58(14): 5733-5736. |
19 | Dixon A G, Partopour B. Computational fluid dynamics for fixed bed reactor design[J]. Annual Review of Chemical and Biomolecular Engineering, 2020, 11: 109-130. |
20 | Wehinger G D, Ambrosetti M, Cheula R, et al. Quo vadis multiscale modeling in reaction engineering? –A perspective[J]. Chemical Engineering Research and Design, 2022, 184: 39-58. |
21 | Partopour B, Dixon A G. An integrated workflow for resolved-particle packed bed models with complex particle shapes[J]. Powder Technology, 2017, 322: 258-272. |
22 | Moghaddam E M, Foumeny E A, Stankiewicz A I, et al. Rigid body dynamics algorithm for modeling random packing structures of nonspherical and nonconvex pellets[J]. Industrial & Engineering Chemistry Research, 2018, 57(44): 14988-15007. |
23 | Chen H, Shi Y, Li Z, et al. Structure-resolved CFD simulations to guide catalyst packing of selective NO reduction[J]. Chemical Engineering Science, 2022, 446: 136888. |
24 | Partopour B, Dixon A G. Effect of particle shape on methanol partial oxidation in a fixed bed using CFD reactor modeling[J]. AIChE Journal, 2020, 66(5): e16904. |
25 | Wehinger G D, Eppinger T, Kraume M. Detailed numerical simulations of catalytic fixed-bed reactors: Heterogeneous dry reforming of methane[J]. Chemical Engineering Science, 2015, 122: 197-209. |
26 | Karthik G M, Buwa V V. Particle-resolved simulations of methane steam reforming in multilayered packed beds[J]. AIChE Journal, 2018, 64(11): 4162-4176. |
27 | Liu X L, Qin B, Zhang Q F, et al. Optimizing catalyst supports at single catalyst pellet and packed bed reactor levels: a comparison study[J]. AIChE Journal, 2021, 67(8): e17163. |
28 | Dixon A G. General correlation for pressure drop through randomly-packed beds of spheres with negligible wall effects[J]. AIChE Journal, 2023, 69(6): e18035. |
29 | Dixon A G. Are there wall effects on pressure drop through randomly packed beds of spherical catalyst particles?[J]. AIChE Journal, 2024, 70(1): e18272. |
30 | Shi Y, Chen H, Chen W Y, et al. Effects of particle shape and packing style on ethylene oxidation reaction using particle-resolved CFD simulation[J]. Particuology, 2023, 82: 87-97. |
31 | Dixon A G. Local transport and reaction rates in a fixed bed reactor tube: Endothermic steam methane reforming[J]. Chemical Engineering Science, 2017, 168: 156-177. |
32 | Dong Y, Geske M, Korup O, et al. What happens in a catalytic fixed-bed reactor for n-butane oxidation to maleic anhydride? Insights from spatial profile measurements and particle resolved CFD simulations[J]. Chemical Engineering Journal, 2018, 350: 799-811. |
33 | Pachulski A, Schödel R, Claus P. Kinetics and reactor modeling of a Pd-Ag/Al2O3 catalyst during selective hydrogenation of ethyne[J]. Applied Catalysis A: General, 2012, 445: 107-120. |
34 | Hite R H, Jackson R. Pressure gradients in porous catalyst pellets in the intermediate diffusion regime[J]. Chemical Engineering Science, 1977, 32(7): 703-709. |
35 | Faghri A, Zhang Y W. Transport phenomena in multiphase systems[M]. Burlington, MA: Elsevier Academic Press, 2006. |
36 | Yaws C L. Chemical properties handbook: physical, thermodynamic, environmental, transport, safety, and health related properties for organic and inorganic chemicals[M]. New York: McGraw-Hill, 1999. |
37 | Bird R B, Stewart W E, Lightfoot E N. Transport Phenomena [M]. John Wiley & Sons Inc, 2002. |
[1] | 冯彬彬, 卢明佳, 黄志宏, 常译文, 崔志明. 碳载体在质子交换膜燃料电池中的应用及优化[J]. 化工学报, 2024, 75(4): 1469-1484. |
[2] | 赵金鹏, 张永民, 兰斌, 罗节文, 赵碧丹, 王军武. 气固鼓泡床结构双流体传热模型及其模拟验证[J]. 化工学报, 2024, 75(4): 1497-1507. |
[3] | 董霄, 白志山, 杨晓勇, 殷伟, 刘宁普, 于启凡. CHPPO工艺氧化液耦合除杂技术的研究与工业应用[J]. 化工学报, 2024, 75(4): 1630-1641. |
[4] | 吉笑盈, 郑园, 李晓鹏, 杨振, 张维, 邱诗蕊, 张倩颖, 罗沧海, 孙东鹏, 陈东, 李东亮. 微流控可控制备液滴、颗粒和胶囊及其应用[J]. 化工学报, 2024, 75(4): 1455-1468. |
[5] | 程婷, 焦纬洲, 刘有智. 功能性填料在超重力旋转填料床中的应用和研究进展[J]. 化工学报, 2024, 75(4): 1414-1428. |
[6] | 蒋方涛, 钱刚, 周兴贵, 段学志, 张晶. 基于[bmim][BF4]相转移催化的氟代碳酸乙烯酯高效合成[J]. 化工学报, 2024, 75(4): 1543-1551. |
[7] | 谷世良, 谭博仁, 程全中, 姚玮洁, 董志鹏, 许峰, 王勇. 轴流泵式混合室内水力学特征的数值模拟[J]. 化工学报, 2024, 75(3): 815-822. |
[8] | 徐百平, 梁瑞凤, 喻慧文, 吴桂群, 肖书平. 双螺杆挤出机强化三角形转子作用下的腔内分布混合模拟[J]. 化工学报, 2024, 75(3): 858-866. |
[9] | 王娟, 李秀明, 邵炜涛, 丁续, 霍莹, 付连超, 白云宇, 李迪. 多孔板鼓泡塔流动与传质特性数值模拟[J]. 化工学报, 2024, 75(3): 801-814. |
[10] | 邓志诚, 许世峰, 王淇冬, 王家瑞, 王斯民. 浸没燃烧处理高盐高化学需氧量废水过程与能耗分析[J]. 化工学报, 2024, 75(3): 1000-1008. |
[11] | 王佳琪, 魏皓琦, 苟阿静, 刘佳兴, 周昕霖, 葛坤. 纳米粒子作用下CO2水合物生成机理研究[J]. 化工学报, 2024, 75(3): 956-966. |
[12] | 李文俊, 赵中阳, 倪震, 周灿, 郑成航, 高翔. 基于气-液传质强化的湿法烟气脱硫CFD模拟研究[J]. 化工学报, 2024, 75(2): 505-519. |
[13] | 屠楠, 刘晓群, 王驰宇, 方嘉宾. 连续进出料鼓泡流化床停留时间分布的相似准则研究[J]. 化工学报, 2024, 75(2): 543-552. |
[14] | 赵若晗, 黄蒙蒙, 朱春英, 付涛涛, 高习群, 马友光. 缩口T型微通道内纳米流体吸收CO2的流动与传质研究[J]. 化工学报, 2024, 75(1): 221-230. |
[15] | 崔怡洲, 李成祥, 翟霖晓, 刘束玉, 石孝刚, 高金森, 蓝兴英. 亚毫米气泡和常规尺寸气泡气液两相流流动与传质特性对比[J]. 化工学报, 2024, 75(1): 197-210. |
阅读次数 | ||||||
全文 |
|
|||||
摘要 |
|
|||||