Nonlinear process monitoring using dynamic one-class random forest

doi:10.11949/j.issn.0438-1157.20161438

Abstract

Abstract:

For the nonlinear and dynamic characteristics of chemical processes, a process monitoring method based on dynamic one-class random forest (DOCRF) is proposed. The sparsity of the process data under normal operating conditions is analyzed. Then, outliers are produced according to the inverse distribution of the normal data. Canonical variate analysis is used to analyze the correlation of normal data, and to project the normal data and outliers into canonical variate space. One-class random forest is trained by using the data in canonical variate space. The monitoring statistic is established according to the similarity between the test sample and the normal data in one-class random forest for fault detection. Simulation results on Tennessee Eastman process showed that the proposed DOCRF method was better than one-class support vector machine overall.

Key words: process monitoring, one-class random forests, one-class support vector machine, canonical variate analysis

摘要：

针对高维化工过程中存在的非线性和动态特性，提出了一种基于动态单类随机森林（dynamic one-class random forest，DOCRF（的过程监控方法。对正常运行状态下的过程数据进行稀疏性分析，根据其反分布产生离群点数据。利用典型变量分析对正常数据进行相关性分析，分别将正常数据和离群点数据投影到典型变量空间，利用典型变量空间数据训练单类随机森林。基于单类随机森林模型根据待检测样本与正常数据的相似度构造监控统计量进行故障检测。在Tennessee Eastman过程的仿真结果表明，所提DOCRF方法总体优于单类支持向量机方法。

关键词: 过程监控, 单类随机森林, 单类支持向量机, 典型变量分析

CLC Number:

TP277

CAO Yuping, LU Xiao, TIAN Xuemin, DENG Xiaogang. Nonlinear process monitoring using dynamic one-class random forest[J]. CIESC Journal, 2017, 68(4): 1459-1465.

曹玉苹, 卢霄, 田学民, 邓晓刚. 基于动态单类随机森林的非线性过程监控方法[J]. 化工学报, 2017, 68(4): 1459-1465.

References 32

[1]	CHIANG L H, RUSSELL E L, AATZ R D. Fault Detection and Diagnosis in Industrial Systems[M]. London:Springer-Verlag, 2001:35-98.
[2]	宋冰, 马玉鑫, 方永锋,等. 基于LSNPE算法的化工过程故障检测[J]. 化工学报, 2014, 65(2):620-627.SONG B, MA Y X, FANG Y F, et al. Fault detection for chemical process based on LSNPE method[J]. CIESC Journal, 2014, 65(2):620-627.
[3]	周东华, 刘洋, 何潇. 闭环系统故障诊断技术综述[J]. 自动化学报, 2013, 39(11):1933-1943.ZHOU D H, LIU Y, HE X, et al. Review on fault diagnosis techniques for closed-loop systems[J]. Acta Automatica Sinica, 2013, 39(11):1933-1943.
[4]	周东华, 史建涛, 何潇. 动态系统间歇故障诊断技术综述[J]. 自动化学报, 2014, 40(2):161-171.ZHOU D H, SHI J T, HE X, et al. Review of intermittent fault diagnosis techniques for dynamic systems[J]. Automatica Sinica, 2014, 40(2):161-171.
[5]	李晗, 萧德云. 基于数据驱动的故障诊断方法综述[J]. 控制与决策, 2011, 26(1):1-9.LI H, XIAO D Y. Survey on data driven fault diagnosis methods[J]. Control & Decision, 2011, 26(1):1-9,16.
[6]	齐咏生, 张海利, 高学金,等. 基于KECA的化工过程故障监测新方法[J]. 化工学报, 2016, 67(3):1063-1069.QI Y S, ZHANG H L,GAO X J, et al. Novel fault monitoring strategy for chemical process based on KECA[J]. CIESC Journal, 2016, 67(3):1063-1069.
[7]	YIN S, DING S X, XIE X, et al. A review on basic data-driven approaches for industrial process monitoring[J]. IEEE Transactions on Industrial Electronics, 2014, 61(11):6418-6428.
[8]	DING S X. Data-driven design of monitoring and diagnosis systems for dynamic processes:a review of subspace technique based schemes and some recent results[J]. Journal of Process Control, 2013, 24(2):431-449.
[9]	GARCIA-ALVAREZ D, FUENTE M J, SAINZ G I. Fault detection and isolation in transient states using principal component analysis[J]. Journal of Process Control, 2012, 22(3):551-563.
[10]	STUBBS S, ZHANG J, MORRIS J. Fault detection in dynamic processes using a simplified monitoring-specific CVA state space modelling approach[J]. Computers & Chemical Engineering, 2012, 26(1):339-344.
[11]	ZHANG N, TIAN X M, CAI L, et al. Process fault detection based on dynamic kernel slow feature analysis[J]. Computers & Electrical Engineering, 2015, 41:9-17.
[12]	VENKATASUAMANIAN V, RENGASWAMY R, KAVURI S N, et al. A review of process fault detection and diagnosis(Ⅲ):Process bistory based methods[J]. Computers & Chemical Engineering, 2003, 27(3):327-346.
[13]	CHINE W, MELLIT A, LUGHI V, et al. A novel fault diagnosis technique for photovoltaic systems based on artificial neural networks[J]. Renewable Energy, 2016, 90:501-512.
[14]	SHAO M, ZHU X J, CAO H F, et al. An artificial neural network ensemble method for fault diagnosis of proton exchange membrane fuel cell system[J]. Energy, 2014, 67(4):268-275.
[15]	YIN Z, HOU J. Recent advances on SVM based fault diagnosis and process monitoring in complicated industrial processes[J]. Neurocomputing, 2016, 174(PB):643-650.
[16]	WANG A, SHA M, LIU L, et al. A new process industry fault diagnosis algorithm based on ensemble improved binary-tree SVM[J]. Chinese Journal of Electronics, 2015, 24(CJE-2):258-262.
[17]	SHIN H J, EOM D H, KIM S S. One-class support vector machines-an application in machine fault detection and classification[J]. Computers & Industrial Engineering, 2005, 48(2):395-408.
[18]	MAHADEVAN S, SHAH S L. Fault detection and diagnosis in process data using one-class support vector machines[J]. Journal of Process Control, 2009, 19(10):1627-1639.
[19]	邓晓刚, 田学民. 基于DMVU-OCSVM的故障诊断方法[J]. 化工学报, 2011, 62(8):2146-2151.DENG X G, TIAN X M. Fault diagnosis method based on dynamic maximum variance unfolding and one-class support vector machine[J]. CIESC Journal, 2011, 62(8):2146-2151.
[20]	EIMAN L. Random forests[J]. Machine Learning, 2001, 45(1):5-32.
[21]	BIAU G Ã Š. Analysis of a random forests model[J]. Journal of Machine Learning Research, 2012, 13:1063-1095.
[22]	RODRIGUEZ J J, KUNCHEVA L I, ALONSO C J. Rotation forest:a new classifier ensemble method[J]. IEEE Transactions on Pattern Analysis and Machine Intelligence, 2006, 28(10):1619-1630.
[23]	ZHANG L, SUGANTHAN P N. Random forests with ensemble of feature spaces[J]. Pattern Recognition, 2014, 47(10):3429-3437.
[24]	SEYEDHOSSEINI M, TASDIZEN T. Disjunctive normal random forests[J]. Pattern Recognition, 2015, 48(3):976-983.
[25]	BERNARD S, ADAM S, HEUTTE L. Dynamic random forests[J]. Pattern Recognition Letters, 2012, 33(12):1580-1586.
[26]	VERIKAS A, GELZINIS A, BACAUSKIENE M. Mining data with random forests:a survey and results of new tests[J]. Pattern Recognition, 2011, 44(2):330-349.
[27]	DÉSIR C, BERNARD S, PETITJEAN C, et al. One class random forests[J]. Pattern Recognition, 2013, 46(12):3490-3506.
[28]	方匡南, 吴见彬, 朱建平, 等. 随机森林方法研究综述[J]. 统计与信息论坛, 2011, 26(3):32-38.FANG K N, WU J B, ZHU J P, et al. A review of technologies on random forests[J].Statistics & Information Forum, 2011, 26(3):32-38.
[29]	RUSSELL E L, CHIANG L H, AATZ R D. Fault detection in industrial processes using canonical variate analysis and dynamic principal component analysis[J]. Chemometrics and Intelligent Laboratory Systems, 2000, 51(1):81-93.
[30]	DOWNS J J, VOGEL E F. A plant-wide industrial process control problem[J]. Computers & Chemical Engineering, 1993, 17(3):245-255.
[31]	LYMAN P R, GEORGAKIS C. Plant-wide control of the Tennessee Eastman problem[J]. Computers & Chemical Engineering, 1995, 19(3):321-331.
[32]	TAX D M J, DUIN R P W. Uniform object generation for optimizing one-class classifiers[J]. Journal of Machine Learning Research, 2002, 2(2):155-173.