CIESC Journal ›› 2013, Vol. 64 ›› Issue (7): 2696-2700.DOI: 10.3969/j.issn.0438-1157.2013.07.052

Previous Articles     Next Articles

Effects of graphene oxide on electromagnetic wave absorption properties of porous silica ceramic

ZHANG Guoying1, LIANG Wenge2   

  1. 1. Zhejiang Business College, Hangzhou 310053, Zhejiang, China;
    2. Shanxi Coke Group Company, Taiyuan 030024, Shanxi, China
  • Received:2013-04-01 Revised:2013-04-18 Online:2013-07-05 Published:2013-07-05

氧化石墨烯对SiO2多孔陶瓷吸波性能的影响

张国英1, 梁文阁2   

  1. 1. 浙江商业职业技术学院, 浙江 杭州 310053;
    2. 山西省焦炭集团公司, 山西 太原 030024
  • 通讯作者: 张国英(1967- ),女,副教授
  • 作者简介:张国英(1967- ),女,副教授。

Abstract: A particle packing method was developed to prepare porous silica ceramics aggregated by sintering silica powder with methyl cellulose as binding agent at 1300℃ for 1 h.The result of electromagnetic wave absorption showed obvious electromagnetic wave absorption properties with a bandwidth of 9 GHz and-3 dB reflectivity.The electromagnetic wave absorption properties changed after graphene oxide (GO)layers were incorporated into the samples.When the mass fraction of graphene oxide impregnated samples was 0.004%,an increase of 75% in absorption was observed with the greatest reflectivity of-5 dB.The eddy current damping caused by these GO layers was responsible for the enhanced absorption efficiency.While excess GO made the porous sample to be a reflector for incident waves.

Key words: silica, porous ceramic, electromagnetic wave absorption properties, graphene

摘要: 采用颗粒堆积法,以石英砂为骨料,甲基纤维素为黏结剂干压成型后,在1300℃保温1 h烧结制备得到SiO2多孔陶瓷样品。通过对样品吸波性能的测试,发现样品的吸波带较宽达到9 GHz,反射率约-3 dB。经过浸渍氧化石墨烯后,样品的吸波性能发生较大改变。在氧化石墨烯质量分数为0.004%时,由于氧化石墨烯的涡流损耗,样品的吸波性能较纯SiO2多孔陶瓷样品的吸波性能提高75%,反射率达到-5 dB。过量的氧化石墨烯使多孔陶瓷样品呈现出对电磁波的全反射。

关键词: 石英砂, 多孔陶瓷, 吸波性能, 石墨烯

CLC Number: