帘式折流片换热器壳程流体流动死区

doi:10.3969/j.issn.0438-1157.2014.z1.044

化工学报 ›› 2014, Vol. 65 ›› Issue (S1): 272-276.DOI: 10.3969/j.issn.0438-1157.2014.z1.044

帘式折流片换热器壳程流体流动死区

古新, 王珂, 郝建设, 刘敏珊, 潘国华

郑州大学河南省过程换热与节能重点实验室, 河南郑州 450002

收稿日期:2014-02-11 修回日期:2014-02-18 出版日期:2014-05-30 发布日期:2014-05-30
通讯作者: 古新
基金资助:
国家自然科学基金项目（51006092）。

Flow dead zones in shell side of shutter baffle heat exchanger

GU Xin, WANG Ke, HAO Jianshe, LIU Minshan, PAN Guohua

Key Laboratory of Process Heat Transfer and Energy Saving of Henan Province, Zhengzhou University, Zhengzhou 450002, Henan, China

Received:2014-02-11 Revised:2014-02-18 Online:2014-05-30 Published:2014-05-30
Supported by:
supported by the National Natural Science Foundation of China (51006092).

摘要/Abstract

摘要： 对帘式折流片换热器壳程流体流动死区大小及分布规律进行了数值模拟和实验研究。研究表明，帘式折流片换热器壳程流体流动死区大小随着Re的增加而降低；流动死区的大小和分布规律受折流栅装配方式的影响，折流栅同向装配时壳程死区小于折流栅对称装配，当壳程Re分别为5000、10000和15000时，折流栅同向装配时的帘式折流片换热器壳程死区分别为折流栅对称装配时的50.5%、51.6%、43.0%。

关键词: 帘式折流片, 流动死区, 数值模拟

Abstract: The size and distribution regularities of flow dead zone of shutter baffle heat exchanger were researched by numerical simulation and experiment. It is concluded that the size of flow dead zone in shell side of shutter baffle heat exchanger is reduced with increase of Reynolds number. The size and distribution of flow dead zone are affected by assemble types of shutter baffles. When the shutter baffle is co-rotating arranged, the size of dead zone in shell side was less than that of symmetrical. When Re=5000,Re=10000 and Re=15000, the dead zone in shell side of shutter baffle heat exchanger with shutter baffle co-rotating arrangement are respectively 50.5%、51.6%、43.0% of that with shutter baffle symmetrical arrangement.

Key words: shutter baffle, flow dead zone, numerical simulation

中图分类号:

TK124

古新, 王珂, 郝建设, 刘敏珊, 潘国华. 帘式折流片换热器壳程流体流动死区[J]. 化工学报, 2014, 65(S1): 272-276.

GU Xin, WANG Ke, HAO Jianshe, LIU Minshan, PAN Guohua. Flow dead zones in shell side of shutter baffle heat exchanger[J]. CIESC Journal, 2014, 65(S1): 272-276.

参考文献 9

[1]	Hao Jianshe(郝建设). Research on length of periodic fully developed section and flow dead zone in shell side of shutter baffle heat[D]. Zhengzhou: Zhengzhou University, 2013
[2]	Gu Xin (古新). Numerical simulation of shell-and-tube heat exchanger and research on sideling-flow heat exchanger [D]. Zhengzhou: Zhengzhou University, 2006
[3]	Gu Xin(古新),Dong Qiwu(董其伍),Liu Minshan(刘敏珊).Numerical research on heat transfer enhancement of shutter baffle heat exchanger [J].Journal of Chemical Engineering of Chinese Universities(高校化学工程学报), 2010, 24(2): 340-345
[4]	Castelain C, Mokrani A, Legentilhomme P. Residence time distribution in twisted pipe flows: helically coiled system and chaotic system[J]. Springer-Verlag, 1997: 359-368
[5]	Yogeshwar S, Toshihiko E. Melt flow characterization in continuous casting tundishes[J]. LSIJ International, 1996, 36(6): 667-672
[6]	Lelinski D, Allen J, Redden L, et al. Analysis of the residence time distribution in large flotation machines[J]. Minerals Engineering, 2005, 15(7):499-505
[7]	Li Shaofen(李绍芬). Chemical Reaction Engineering (反应工程) [M]. Beijing: Chemical Industry Press, 2002
[8]	State Bureau of Quality Technical Supervision(国家质量技术监督局).GB 151－1999 Tubular heat exchanger[S]. Beijing: Chemical Industry Press, 2002
[9]	Bi Xuegong(毕学工), Li Hongyu(李宏玉), Liu Guangming(刘光明), Jin Yan(金焱). Numerical simulation of design optimization of a continuous casting tundish based on RTD curve[J]. Journal of Wuhan University of Science and Technology(武汉科技大学学报), 2010, 33(4): 343-346

[1]	宋嘉豪, 王文. 斯特林发动机与高温热管耦合运行特性研究[J]. 化工学报, 2023, 74(S1): 287-294.
[2]	张思雨, 殷勇高, 贾鹏琦, 叶威. 双U型地埋管群跨季节蓄热特性研究[J]. 化工学报, 2023, 74(S1): 295-301.
[3]	叶展羽, 山訸, 徐震原. 用于太阳能蒸发的折纸式蒸发器性能仿真[J]. 化工学报, 2023, 74(S1): 132-140.
[4]	张义飞, 刘舫辰, 张双星, 杜文静. 超临界二氧化碳用印刷电路板式换热器性能分析[J]. 化工学报, 2023, 74(S1): 183-190.
[5]	王志国, 薛孟, 董芋双, 张田震, 秦晓凯, 韩强. 基于裂隙粗糙性表征方法的地热岩体热流耦合数值模拟与分析[J]. 化工学报, 2023, 74(S1): 223-234.
[6]	何松, 刘乔迈, 谢广烁, 王斯民, 肖娟. 高浓度水煤浆管道气膜减阻两相流模拟及代理辅助优化[J]. 化工学报, 2023, 74(9): 3766-3774.
[7]	韩晨, 司徒友珉, 朱斌, 许建良, 郭晓镭, 刘海峰. 协同处理废液的多喷嘴粉煤气化炉内反应流动研究[J]. 化工学报, 2023, 74(8): 3266-3278.
[8]	邢雷, 苗春雨, 蒋明虎, 赵立新, 李新亚. 井下微型气液旋流分离器优化设计与性能分析[J]. 化工学报, 2023, 74(8): 3394-3406.
[9]	程小松, 殷勇高, 车春文. 不同工质在溶液除湿真空再生系统中的性能对比[J]. 化工学报, 2023, 74(8): 3494-3501.
[10]	刘文竹, 云和明, 王宝雪, 胡明哲, 仲崇龙. 基于场协同和耗散的微通道拓扑优化研究[J]. 化工学报, 2023, 74(8): 3329-3341.
[11]	洪瑞, 袁宝强, 杜文静. 垂直上升管内超临界二氧化碳传热恶化机理分析[J]. 化工学报, 2023, 74(8): 3309-3319.
[12]	黄可欣, 李彤, 李桉琦, 林梅. 加装旋转叶轮T型通道流场的模态分解[J]. 化工学报, 2023, 74(7): 2848-2857.
[13]	史方哲, 甘云华. 超薄热管启动特性和传热性能数值模拟[J]. 化工学报, 2023, 74(7): 2814-2823.
[14]	江锦波, 彭新, 许文烜, 门日秀, 刘畅, 彭旭东. 泵出型螺旋槽油气密封泄漏特性及参数影响研究[J]. 化工学报, 2023, 74(6): 2538-2554.
[15]	于源, 陈薇薇, 付俊杰, 刘家祥, 焦志伟. 几何相似涡流空气分级机环形区流场变化规律研究及预测[J]. 化工学报, 2023, 74(6): 2363-2373.

帘式折流片换热器壳程流体流动死区

Flow dead zones in shell side of shutter baffle heat exchanger

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 9

相关文章 15

编辑推荐

Metrics

本文评价