埋管流化床颗粒流动行为的数值模拟

doi:10.3969/j.issn.0438-1157.2013.08.012

化工学报 ›› 2013, Vol. 64 ›› Issue (8): 2788-2793.DOI: 10.3969/j.issn.0438-1157.2013.08.012

埋管流化床颗粒流动行为的数值模拟

杨春振¹, 段钰锋², 孙荣峰¹, 范晓旭¹

1. 山东省科学院能源研究所山东省生物质气化技术重点实验室, 山东济南 250014;
2. 东南大学能源与环境学院, 能源热转换及其过程测控教育部重点实验室, 江苏南京 210096

收稿日期:2012-12-28 修回日期:2013-03-21 出版日期:2013-08-05 发布日期:2013-08-05
通讯作者: 杨春振(1984- ),男,博士。
作者简介:杨春振(1984- ),男,博士。
基金资助:
山东省自然科学基金项目(ZR2011EL042)。

Numerical study of solids behavior in fluidized bed with multi-immersed tubes

YANG Chunzhen¹, DUAN Yufeng², SUN Rongfeng¹, FAN Xiaoxu¹

1. Key Laboratory for Biomass Gasification Technology of Shandong Province, Energy Research Institute of Shandong Academy of Sciences, Jinan 250014, Shandong, China;
2. Key Laboratory of Energy Thermal Conversion and Control, Ministry of Education, School of Energy and Environment, Southeast University, Nanjing 210096, Jiangsu, China

Received:2012-12-28 Revised:2013-03-21 Online:2013-08-05 Published:2013-08-05
Supported by:
supported by the Natural Science Foundation of Shandong Province(ZR2011EL042).

摘要/Abstract

摘要： 提出区域覆盖法,实现了正交结构化网格(DEM网格)与非规则网格(Fluent网格)的快速耦合,通过减少颗粒搜索量的方法,提高计算效率;采用向量法高效、精确定位颗粒在非规则网格内的位置,进而形成基于非规则网格的CFD-DEM数值模拟平台。在宽和高分别为250 mm和800 mm的二维多埋管流化床内对颗粒流动行为进行了数值模拟研究。结果表明:基于区域覆盖法建立的CFD-DEM模型能够模拟具有复杂几何结构流化床内的气固流动行为;多埋管流化床内的颗粒上升流磨损埋管的迎风面,在背风面形成颗粒浓度较低的区域;而颗粒下降流对埋管的影响与上升流的影响相反;多埋管流化床内的颗粒行为可划分为颗粒上升流、颗粒下降流、颗粒循环流和无颗粒区。

关键词: 流化床, 区域覆盖法, 非规则网格, 埋管

Abstract: The domain coverage method(DCM)was proposed to couple orthogonal structured DEM mesh with irregular Fluent mesh.DCM increased calculation efficiency by decreasing particle searching capacity for each Fluent cell.Particles were positioned in irregular Fluent cells with the vector method.The CFD-DEM platform was built based on DCM.And then solids behavior was studied in a fluidized bed 250 mm in bed width and 800mm in bed height with multi-immersed tubes.Simulation results showed that the proposed CFD-DEM model based on DCM could simulate gas-solids flow behavior in a fluidized bed with complex geometries.Particles moving upward collides with windward side of the fluidized bed and the other side formed a region with low solids fraction. Particles moving downward had an opposite effect on solids behavior comparing with particles moving upward.Solids behavior could be expressed into four regions:solids flow moving upward,solids flow moving downward,solids flow moving circularly and no solids region.

Key words: fluidized bed, domain coverage method, irregular mesh, immersed tube

中图分类号:

杨春振, 段钰锋, 孙荣峰, 范晓旭. 埋管流化床颗粒流动行为的数值模拟[J]. 化工学报, 2013, 64(8): 2788-2793.

YANG Chunzhen, DUAN Yufeng, SUN Rongfeng, FAN Xiaoxu. Numerical study of solids behavior in fluidized bed with multi-immersed tubes[J]. CIESC Journal, 2013, 64(8): 2788-2793.

参考文献 15

[1]	Tsuji Y,Tanaka T,Ishida T.Lagrangian numerical simulation of plug flow of cohesionless particles in a horizontal pipe[J].Powder Technology,1992,71(3):239-250
[2]	He Y,Zhan W,Zhao Y,Lu H,Schlaberg I.Prediction on immersed tubes erosion using two-fluid model in a bubbling fluidized bed[J].Chemical Engineering Science,2009,64(13):3072-3082
[3]	Zhao Y,Cheng Y,Wu C,Ding Y,Jin Y.Eulerian-Lagrangian simulation of distinct clustering phenomena and RTDs in riser and downer[J].Particuology,2009,129(1):46-52
[4]	Zhang M H,Chu K W,Wei F,Yu A B.A CFD-DEM study of the cluster behavior in riser and downer reactors[J].Powder Technology,2008,184(2):151-165
[5]	Cloete S,Amini S,Johansen S T.On the effect of cluster resolution in riser flows on momentum and reaction kinetic interaction[J].Powder Technology,2011,210(1):6-17
[6]	Yang C,Duan Y,Hu H.DEM-based models for solids exchange in a pant leg fluidized bed//Cleaner Combustion and Sustainable World[M].Qi H,Zhao B,Eds.Berlin:Springer Heidelberg,2013:641-649
[7]	Rong D,Mikami T,Horio M.Particle and bubble movements around tubes immersed in fluidized beds-a numerical study[J].Chemical Engineering Science,1999,54(23):5737-5754
[8]	Zhao Y,Jiang M,Cheng Y.Particle-scale simulation of the flow and heat transfer behaviors in fluidized bed with immersed tube[J].Frontiers of Chemical Engineering in China,2008,2(3):341-345
[9]	Zhao Yongzhi(赵永志),Cheng Yi(程易).Particle-scale simulation of fluidized bed with immersed tubes[J].Chemical Engineering(China)(化学工程),2007,35(11):21-24
[10]	Wu C L,Berrouk A S,Nandakumar K.Three-dimensional discrete particle model for gas-solid fluidized beds on unstructured mesh[J].Chemical Engineering Journal,2009,152(2/3):514-529
[11]	Wu C L,Zhan J M,Li Y S,Lam K S,Berrouk A S.Accurate void fraction calculation for three-dimensional discrete particle model on unstructured mesh[J].Chemical Engineering Science,2009,64(6):1260-1266
[12]	Su J,Gu Z,Xu X Y.Discrete element simulation of particle flow in arbitrarily complex geometries[J].Chemical Engineering Science,2011,66(23):6069-6088
[13]	Rong Liangwan(容亮湾),Zhan Jiemin(詹杰民).Investigation on the microscopic structure of bubble in dense particle system[J].Acta Physica Sinica(物理学报),2010,59(8):5572-5580
[14]	Liu Daoyin(刘道银).Experimental and numerical investigations on solids mixing in fluided beds.Nanjing:Southeast University,2011
[15]	Yusuf R,Halvorsen B,Melaaen M C.Eulerian-Eulerian simulation of heat transfer between a gas-solid fluidized bed and an immersed tube-bank with horizontal tubes[J].Chemical Engineering Science,2011,66(8):1550-1564

埋管流化床颗粒流动行为的数值模拟

Numerical study of solids behavior in fluidized bed with multi-immersed tubes

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 15

相关文章 15

编辑推荐

Metrics

本文评价

[1]	张思雨, 殷勇高, 贾鹏琦, 叶威. 双U型地埋管群跨季节蓄热特性研究[J]. 化工学报, 2023, 74(S1): 295-301.
[2]	杨峥豪, 何臻, 常玉龙, 靳紫恒, 江霞. 生物质快速热解下行式流化床反应器研究进展[J]. 化工学报, 2023, 74(6): 2249-2263.
[3]	陈巨辉, 张谦, 舒崚峰, 李丹, 徐鑫, 刘晓刚, 赵晨希, 曹希峰. 基于DEM方法的旋转流化床纳米颗粒流动特性研究[J]. 化工学报, 2023, 74(6): 2374-2381.
[4]	张媛媛, 曲江源, 苏欣欣, 杨静, 张锴. 循环流化床燃煤机组SNCR脱硝过程气液传质和反应特性[J]. 化工学报, 2023, 74(6): 2404-2415.
[5]	袁子涵, 王淑彦, 邵宝力, 谢磊, 陈曦, 马一玫. 基于幂律液固曳力模型流化床内湿颗粒流动特性的研究[J]. 化工学报, 2023, 74(5): 2000-2012.
[6]	张东旺, 杨海瑞, 周托, 黄中, 李诗媛, 张缦. 生物质锅炉对流受热面积灰冷态模拟实验研究[J]. 化工学报, 2022, 73(8): 3731-3738.
[7]	刘新华, 韩振南, 韩健, 梁斌, 张楠, 胡善伟, 白丁荣, 许光文. 基于热解与燃烧反应重构的低NO _x 解耦燃烧原理与技术[J]. 化工学报, 2022, 73(8): 3355-3368.
[8]	王刚, 夏志豪, 李希艳, 张虹, 韩振南, 宋兴飞, 许光文. 不同气氛下流化床菱镁矿轻烧产物特性研究[J]. 化工学报, 2022, 73(8): 3699-3707.
[9]	朱莲峰, 王超, 张梦娟, 刘方正, 贾鑫, 安萍, 许光文, 韩振南. 水蒸气/氧流化床两段煤气化制备低焦油合成气工艺实验[J]. 化工学报, 2022, 73(8): 3720-3730.
[10]	王凯玥, 马永丽, 李琛, 刘明言. 气液固微型流化床的气液传质系数[J]. 化工学报, 2022, 73(8): 3529-3540.
[11]	牛犁, 刘梦溪, 王海北. 密相流化床中介尺度流动结构的流体力学特性研究[J]. 化工学报, 2022, 73(6): 2622-2635.
[12]	范小强, 黄正梁, 孙婧元, 王靖岱, 王晓飞, 胡晓波, 韩国栋, 阳永荣, 吴文清. 气液法流化床乙烯云聚合工艺开发及产品高性能化[J]. 化工学报, 2022, 73(6): 2742-2747.
[13]	马永丽, 刘明言, 胡宗定. 气液固流化床流动介尺度模型研究进展[J]. 化工学报, 2022, 73(6): 2438-2451.
[14]	李铁男, 赵碧丹, 赵鹏, 张永民, 王军武. 气固流化床启动阶段挡板内构件受力特性的CFD-DEM模拟[J]. 化工学报, 2022, 73(6): 2649-2661.
[15]	徐劲松, 林敏, 陈晓平, 马吉亮, 耿鹏飞, 鲍学兵, 刘道银, 梁财. 不锈钢酸洗废混酸流化床焙烧再生特性的实验研究[J]. 化工学报, 2022, 73(5): 2242-2250.