微型气液固三相等温微分浆态床反应器的优化

doi:10.3969/j.issn.0438-1157.2013.z1.004

化工学报 ›› 2013, Vol. 64 ›› Issue (S1): 26-32.DOI: 10.3969/j.issn.0438-1157.2013.z1.004

微型气液固三相等温微分浆态床反应器的优化

胡文华, 陈斌, 高红帅, 吕兴梅

中国科学院过程工程研究所, 北京 100090

收稿日期:2013-10-31 修回日期:2013-11-05 出版日期:2013-12-30 发布日期:2013-12-30
通讯作者: 吕兴梅
作者简介:胡文华(1987—)，女。
基金资助:
科技部国家重大科学仪器设备开发专项(2011YQ12003907)。

Optimization of gas-liquid-solid three-phase isothermal differential slurry microreactor

HU Wenhua, CHEN Bin, GAO Hongshuai, LV Xingmei

Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100090, China

Received:2013-10-31 Revised:2013-11-05 Online:2013-12-30 Published:2013-12-30
Supported by:
supported by the National Scientific Instruments Projects of China(2011YQ12003907).

摘要/Abstract

摘要： 针对气液固三相浆态床催化反应中，传递、反应、催化剂的原位表征均比较复杂的问题，为了有利于气、固相均匀分散于液相和反应温度在反应器中实现等温，通过对气液固三相反应工艺特性和反应器性能要求的分析，对微型气液固三相浆态床反应器进行了优化。根据微型浆态床对气液固三相反应分析的要求，采用图像法研究了分布器为G1、G2、G3，砂板直径为2、2.5、3 cm反应器中的流体力学性能特征，考察了气体流速、温度、反应器直径及气体分布器对气含率、气泡尺寸、气泡上升速率以及气泡分布的影响，并进行流体动力学模拟计算，确定了微型浆态床反应器的直径为2 cm，气体分布器为G3砂板的反应器结构，该反应器可以应用于反应过程中间态及液体产物生成过程的测试。

关键词: 微型反应器, 流体力学, 结构优化, 等温微分

Abstract: Based on the complexity of in-situ characterization of deliver, reaction and catalyst in catalytic reaction, which happened in gas-liquid-solid three-phase slurry reactor, it was optimized the gas-liquid-solid three-phase isothermal differential slurry microreactor for dispersing gas phase and solid phase present in liquid phase and uniform temperature distribution in the reactor, through the analysis of technological characteristics of gas-liquid-solid three-phase reaction and performance requirements for reactor. Considering the application of slurry microreactor to gas-liquid-solid three-phase reaction analysis, the flow dynamics characteristics in three distributors of G1, G2, G3 core plate and in three reactors of 2 cm, 2.5 cm, 3 cm inner diameter were studied by using the image method. The influences of gas flow rate, temperature, diameter of reactor and gas distributor on the gas holdup, gas flow rate, distribution of bubble size were investigated. Through the fluid dynamics simulation, the diameter of slurry microreactor(2 cm), the type of gas distributor(G3 core plate) and so on was defined. Meanwhile, the gas-liquid-solid three-phase isothermal differential slurry microreactor which was applied to the in-situ analysis of chemical composition history in reaction process was developed.

Key words: microreactor, hydrodynamics, structural optimization, isothermal differential

中图分类号:

TQ031

胡文华, 陈斌, 高红帅, 吕兴梅. 微型气液固三相等温微分浆态床反应器的优化[J]. 化工学报, 2013, 64(S1): 26-32.

HU Wenhua, CHEN Bin, GAO Hongshuai, LV Xingmei. Optimization of gas-liquid-solid three-phase isothermal differential slurry microreactor[J]. CIESC Journal, 2013, 64(S1): 26-32.

参考文献 20

[1]	Fan L S, Matsuura A, Chem S H. Hydrodynamic characteristics of a gas-liquid-solid fluidized bed containing a binary mixture of particles[J]. AIChE Journal, 1985, 31:1801-1810
[2]	Zhang J P, Grace J R, Epstein N, Lim K S. Flow regine identification in gas-liquid flow and three-phase fluidized beds[J]. Chemical Engineering Science, 1997, 52(21/22):3979-3992
[3]	Soong Y, Harke F W, Gamwo I K, Schehl R R, Zarochak M F. Hydrodynamic study in a slurry-bubble-column reactor[J]. Catalysis Today, 1997, 5:427-434
[4]	Behkish, Arsam, Lemoine, Romain, Sehabiague, Laurent, Oukaci, Rachid, Morsi, Badie I. Gas holdup and bubble size behavior in a large-scale slurry bubble column reactor operating with an organic liquid under elevated pressures and temperatures[J]. Chemical Engineering Journal, 2007, 128:69-84
[5]	Krishna R, Urseanu M I, Dreher A J. Gas hold-up in bubble columns：influence of alcohol addiction versus operation at elevated pressures[J]. Chemical Engineering and Processing, 2000, 78(3): 442-448
[6]	Wilkinson P M, Spek A P, van Dierendonck L L. Design parameters estimation for scale-up of high-pressure bubble columns[J]. AIChE Journal, 1992, 38:544-554
[7]	Rados N，Shaikh A，Al-Dahhan M H. Solids flow mapping in a high pressure slurry bubble column[J]. Chemical Engineering Science, 2005, 60:6067-6072
[8]	Luo X K, Yang G Q, Lee D J, Fan L S. Single bubble formation in high pressure liquid-solid suspensions[J]. Powder Technology, 1998, 100: 103-112
[9]	Jiang P, Lin T J, Luo X, Fan L S. Visualization of high pressure (21 MPa) bubble column: bubble characteristics[J]. Chemical Engineering Research & Design, 1995, 73: 269-274
[10]	Luo X K, Yang G Q, Lee D J, Fan L S. Maximum stable bubble size and gas holdup in high-pressure slurry bubble columns[J]. AIChE Journal, 1999, 45:665-680
[11]	Larachi F, Cassanello M, Marie M, Chaouki J, Guy C. Solids circulation patterns in three phase fluidized beds containing binary mixtures of particles as inferred from RPT[J]. Chemical Engineering Research & Design，1995，73:263-268
[12]	Yu Jian(余剑), Zhu Jianhong(朱剑虹), Xu Guangwen(许光文).Development and application of micro kinetic analyzer for fluidized bed gas-solid reactions[J]. CIESC Journal(化工学报),2009,60(10):2669-2674
[13]	Yu Jian, Yao Changbin, Zeng Xi, Geng Shuang, Dong Li, Wang Yin, Gao Shiqiu, Xu Guangwen. Biomass pyrolysis in a micro-fluidized bed reactor: characterization and kinetics[J]. Chemical Engineering Journal, 2011, 168(2):839-847
[14]	Yu Jian, Zeng Xi, Zhang Juwei, Zhong Mei, Zhang Guangyi, Wang Yin, Xu Guangwen. Isothermal differential characteristics of gas-solid reaction in micro-fluidized bed reactor[J]. Fuel, 2011, 168(2):839-847
[15]	Potic B, Kersten S R A, Ye M, van der Hoef M A, Kuipers J A M, van Swaaij W P M. Fluidization with hot compressed water in micro-reactors[J]. Chemical Engineering Science, 2005, 60(22):5982-5990
[16]	Wang J W, Tan L H, van der Hoef M A, van Sint Annaland M, Kuipers J A M. From bubbling to turbulent fluidization: advanced onset of regime transition in micro-fluidized beds[J]. Chemical Engineering Science, 2011, 66(9):2001-2007
[17]	Xu Guangwen, Liu Xinhua, Gao Shiqiu. Micro fluidized beds: wall effect and operability[J]. Chemical Engineering Journal, 2008, 137(2):302-307
[18]	Wang Lixiang, Wu Guiying, Li Yang, Qi Nana, Zhang Kai. Gas holdup measurement of bubble column using indirect expansion technique[J]. Journal of Chemical Industry and Engineering, 2010, 61(9):2353-2357
[19]	Kazakis N A, Mouza A A, Paras S V. Experimental study of bubble formation at metal porous spargers: effect of liquid properties and sparger characteristics on the initial bubble size distribution[J]. Chemical Engineering Journal, 2008, 137:265-281
[20]	Luo Ya, Ma Zengyi, Yan Jianhua,Lin Bin,Wang Fei,Cen Kefa. Study on gas bubbles behavior in gas solid two phase fluidized bed by using image[J]. Control and Instruments in Chemical Industry, 2011, 38(1):60-64

微型气液固三相等温微分浆态床反应器的优化

Optimization of gas-liquid-solid three-phase isothermal differential slurry microreactor

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 20

相关文章 15

编辑推荐

Metrics

本文评价

[1]	张思雨, 殷勇高, 贾鹏琦, 叶威. 双U型地埋管群跨季节蓄热特性研究[J]. 化工学报, 2023, 74(S1): 295-301.
[2]	肖明堃, 杨光, 黄永华, 吴静怡. 浸没孔液氧气泡动力学数值研究[J]. 化工学报, 2023, 74(S1): 87-95.
[3]	温凯杰, 郭力, 夏诏杰, 陈建华. 一种耦合CFD与深度学习的气固快速模拟方法[J]. 化工学报, 2023, 74(9): 3775-3785.
[4]	汪林正, 陆俞冰, 张睿智, 罗永浩. 基于分子动力学模拟的VOCs热氧化特性分析[J]. 化工学报, 2023, 74(8): 3242-3255.
[5]	邢雷, 苗春雨, 蒋明虎, 赵立新, 李新亚. 井下微型气液旋流分离器优化设计与性能分析[J]. 化工学报, 2023, 74(8): 3394-3406.
[6]	岳林静, 廖艺涵, 薛源, 李雪洁, 李玉星, 刘翠伟. 凹坑缺陷对厚孔板喉部空化流动特性影响研究[J]. 化工学报, 2023, 74(8): 3292-3308.
[7]	牛超, 沈胜强, 杨艳, 潘泊年, 李熠桥. 甲烷BOG喷射器流动过程计算与性能分析[J]. 化工学报, 2023, 74(7): 2858-2868.
[8]	何晓崐, 刘锐, 薛园, 左然. MOCVD生长AlN单晶薄膜的气相和表面化学反应综述[J]. 化工学报, 2023, 74(7): 2800-2813.
[9]	于源, 陈薇薇, 付俊杰, 刘家祥, 焦志伟. 几何相似涡流空气分级机环形区流场变化规律研究及预测[J]. 化工学报, 2023, 74(6): 2363-2373.
[10]	刘道银, 陈柄岐, 张祖扬, 吴琰. 颗粒聚团结构对曳力特性影响的数值模拟[J]. 化工学报, 2023, 74(6): 2351-2362.
[11]	李晨曦, 刘永峰, 张璐, 刘海峰, 宋金瓯, 何旭. O₂/CO₂氛围下正庚烷的燃烧机理研究[J]. 化工学报, 2023, 74(5): 2157-2169.
[12]	董鑫, 单永瑞, 刘易诺, 冯颖, 张建伟. 非牛顿流体气泡羽流涡特性数值模拟研究[J]. 化工学报, 2023, 74(5): 1950-1964.
[13]	李正涛, 袁志杰, 贺高红, 姜晓滨. 疏水界面上的NaCl液滴蒸发过程内环流调控机制研究[J]. 化工学报, 2023, 74(5): 1904-1913.
[14]	周艾然, 陆平, 夏建辉, 李冬勤, 郭杰, 杜明, 董立春. 氯化钛白氧化反应器结疤问题分析及数值模拟[J]. 化工学报, 2023, 74(4): 1499-1508.
[15]	刘庆超, 贾辉, 许逸飞, 路娜, 尹延梅, 王捷. 基于FBG力学传感的曝气生物滤池中剪切力分布研究[J]. 化工学报, 2023, 74(4): 1755-1763.