[1] |
李鹏,田健辉.汽油吸附脱硫S-Zorb技术进展综述[J].炼油技术与工程,2014,44(1):1-6.LI P,TIAN J H.Overview of progress of SINOPEC S-Zorb process[J].Petroleum Refinery Engineering,2014,44(1):1-6.
|
[2] |
吴德飞,孙丽丽,黄泽川.S-Zorb技术进展与工程应用[J].炼油技术与工程,2014,44(10):1-4.WU D F,SUN L L,HUANG Z C.New development of S-Zorb process and engineering application[J].Petroleum Refinery Engineering,2014,44(10):1-4.
|
[3] |
李辉.S-Zorb装置关键设备运行分析[J].石油炼制与化工,2012,43(9):81-85.LI H.Operation analysis of the key equipments in S-Zorb unit[J].Petroleum Processing and Petrochemicals,2012,43(9):81-85.
|
[4] |
LI H X,JI Z L,WU X L,et al.Numerical analysis of flow field in the hot gas filter vessel during the pulse cleaning process[J].Powder Technology,2007,173:82-92.
|
[5] |
GAMWO I K,HALOW J S,AHMADI G.Non isothermal simulation of flows in the hot-gas filter vessel at Wilsonville[J].Particulate Science and Technology,2002,20(1):45-58.
|
[6] |
MAZAHERI A R,AHMADI G,GAMWO I K.Hot-gas flow and particle transport and deposition in a candle filter vessel[J].Advanced Powder Technology,2003,14(1):111-125.
|
[7] |
HEIDENREICH S.Hot gas filtration-a review[J].Fuel,2013,104:83-94.
|
[8] |
KANAOKA C,KISHIMA T.Observation of the process of dust accumulation on a rigid ceramic filter surface and the mechanism of cleaning dust from the filter surface[J].Advanced Powder Technology,1999,10(4):417-426.
|
[9] |
DITTLER A,FERER M V,MATHUR P,et al.Patchy cleaning of rigid gas filters-transient regeneration phenomena comparison of modelling to experiment[J].Powder Technology,2002,124:55-66.
|
[10] |
LAUX S,GIERNOTH B,BULAK H,et al.Aspects of pulse-jet cleaning of ceramic filter element[M]//Gas Cleaning at High Temperatures.Netherlands:Springer,1993:203-224.
|
[11] |
SCHILDERMANS I,BAEYENS J,SMOLDERS K.Pulse jet cleaning of rigid filters:a literature review and introduction to process modeling[J].Filtration&Separation,2004,41(5):26-33.
|
[12] |
CHUAH T G,SEVILLE J P K.Measuring and modeling the performance of rigid ceramic filters[J].ASEAN Journal of Chemical Engineering,2008,2(1):87-96.
|
[13] |
BERBNER S,PILZ T.Characterization of the filtration and regeneration behavior of rigid ceramic barrier filters at high temperatures[J].Powder Technology,1996,86:103-111.
|
[14] |
ITO S,TANAKA T,KAWAMURA S.Changes in pressure loss and face velocity of ceramic candle filters caused by reverse cleaning in hot coal gas filtration[J].Powder Technology,1998,100:32-40.
|
[15] |
MAI R,LEIBOLD H,SEIFERT H,et al.Coupled pressure pulse (CPP) recleaning system for ceramic hot-gas filters with an integrated safety filter[J].Chemical Engineering&Technology,2003,26(5):577-579.
|
[16] |
KUROSE R,MAKINO H,HATA M,et al.Numerical analysis of a flow passing through a ceramic candle filter on pulse jet cleaning[J].Advanced Powder Technology,2003,14(6):735-748.
|
[17] |
RHYNER U,MAI R,LEIBOLD H,et al.Dynamic pressure measurements of a hot gas filter as a diagnostic tool to assess the time dependent performance[J].Biomass&Bioenergy,2013,53:72-80.
|
[18] |
姬忠礼,郭建光.负压区的存在对刚性过滤器脉冲反吹性能的影响[J].工程热物理学报,2000,21(1):58-61.JI Z L,GUO J G.Effect of negative pressure region on pulse-jet cleaning performance of rigid ceramic filters[J].Journal of Engineering Thermophysics,2000,21(1):58-61.
|
[19] |
焦海青,姬忠礼,陈鸿海.操作参数对陶瓷过滤管脉冲反吹清灰过程的影响[J].化工学报,2004,55(7):1155-1160.JIAO H Q,JI Z L,CHEN H H.Influence of operating parameters on pulse cleaning process of ceramic filter[J].Journal of Chemical Industry and Engineering (China),2004,55(7):1155-1160.
|
[20] |
JI Z L,JIAO H Q,CHEN H H.Image analysis on detachment process of dust cake on ceramic candle filter[J].Chinese Journal of Chemical Engineering,2005,13(2):178-183.
|
[21] |
姬忠礼,彭书,陈鸿海.陶瓷过滤器脉冲反吹全过程的瞬变流场计算[J].化工学报,2003,54(1):35-41.JI Z L,PENG S,CHEN H H.Numerical calculation of transient flow field of ceramic candle filter during pulse cleaning process[J].Journal of Chemical Industry and Engineering (China),2003,54(1):35-41.
|
[22] |
姬忠礼,丁富新,孟祥波,等.陶瓷过滤器滤管外瞬态流场[J].化工学报,2000,51(2):165-168.JI Z L,DING F X,MENG X B,et al.Instantaneous velocity outside filtration element in ceramic filter[J].Journal of Chemical Industry and Engineering (China),2000,51(2):165-168.
|