惯性力作用下船用液化天然气储罐的应力分析

doi:10.11949/j.issn.0438-1157.20150719

化工学报 ›› 2015, Vol. 66 ›› Issue (S2): 349-353.DOI: 10.11949/j.issn.0438-1157.20150719

惯性力作用下船用液化天然气储罐的应力分析

王晓东, 惠虎

华东理工大学承压系统安全科学教育部重点实验室, 上海 200237

收稿日期:2015-05-26 修回日期:2015-06-10 出版日期:2015-08-31 发布日期:2015-08-31
通讯作者: 惠虎

Stress analysis of LNG storage tank for ships under inertial force

WANG Xiaodong, HUI Hu

Key Laboratory of Pressure Systems and Safety, Ministry of Education, East China University of Science and Technology, Shanghai 200237, China

Received:2015-05-26 Revised:2015-06-10 Online:2015-08-31 Published:2015-08-31

摘要/Abstract

摘要：

船用液化天然气储罐作为移动式压力容器,在运输过程中不仅承受静载荷,并且还承受一定惯性载荷的作用。相比传统的常规设计计算,使用有限元方法对于液化天然气储罐的结构强度分析将会更加准确方便。文中使用ANSYS软件对液化天然气储罐建立有限元模型,对于惯性载荷作用下的储罐进行了数值模拟,对于受到应力集中的局部进行应力分类和安全评定。仿真结果对于液化天然气储罐的设计制造提供参考和依据。

关键词: 天然气, 储罐, 惯性力, 结构强度, 模型, 数值模拟

Abstract:

As transportable pressure vessel,LNG storage tank used in ships bears not only the static load,but also inertia force in the transport process.Compared with the traditional calculation of conventional design,the use of finite element method for analysis of structural strength of LNG storage tank will be more accurate and convenient.In this paper,the finite element model is established for LNG storage tank using the ANSYS software,stress analysis was done for tank inertial load,stress classification and safety assessment are made for the parts of stress concentration.Simulation results provide the reference and basis of design and manufacture of LNG storage tank.

Key words: natural gas, storage tank, inertial force, strength of the structure, model, numerical simulation

中图分类号:

TQ053.2

王晓东, 惠虎. 惯性力作用下船用液化天然气储罐的应力分析[J]. 化工学报, 2015, 66(S2): 349-353.

WANG Xiaodong, HUI Hu. Stress analysis of LNG storage tank for ships under inertial force[J]. CIESC Journal, 2015, 66(S2): 349-353.

参考文献 20

[1]	Mao Xuedong(毛雪东),Zhang Jie(张杰),Zhou Kaisong(周凯崧),Wang Mingfu(王明富).Analysis on finite element structure of low temperature liquid tank based on solid model[J].CIESC Journal(化工学报),2010,61(5):1107-1111.
[2]	Wei Dongxue(魏冬雪).Strength analysis and structural improvement of a liquefied-gas cryogenic tank[D].Beijing:Beijing University of Chemical Technology,2010.
[3]	Wang Zhengxing(王正兴).Finite element analysis on temperature field of radial support structure for special horizontal cryogenic vessel[J].Cryogenics(低温工程),2008,163(3):42-43.
[4]	Wan Liping(万里平).Strength analysis and anti-wave plate design of a liquefied gas tanker[D].Beijing:Beijing University of Chemical Technology,2011.
[5]	Zheng Jinyang(郑津洋),Dong Qiwu(董其武),Sang Zhifu(桑芝富).Process Equipment Design(过程设备设计)[M].3rd ed.Beijing:Chemical Industry Press,2005:179-189.
[6]	Wang Zhiwen(王志文),Cai Renliang(蔡仁良).Design of Chemical Pressure Vessel(化工容器设计)[M].3rd ed.Beijing:Chemical Industry Press,2005:223-237.
[7]	Qin Fuyou(秦富友),Du Sihong(杜四宏).Stress strength evaluation for opening tubing connection on pressure vessel[J].Technology & Development of Chemical Industry(化工技术与开发),2011,40(7):52-54.
[8]	Lu Zhimin(路智敏),Li Qiang(李强),Xie Yunye(谢云叶).Finite element analysis of strain at nozzle junction of cylindrical pressure vessel[J].Journal of Beijing Jiaotong University(北京交通大学学报),2008,32(4):36-39.
[9]	GB 150-2011 Pressure vessels[S].
[10]	Gao Yi(高毅).The structure strength and fatigue analysis of cold stretched cryogenic transportable vessel[D].Shanghai:East China University of Science and Technology,2013.
[11]	Rules for natural gas fuelled ships[S/OL].http://www.ccs.org.cn/ccswz/font/fontAction!downloadArticleFile.do?attachId=ff808081412b4cca0141ee447cfa1660
[12]	JB 4732-1995 Steel pressure vessels-design by analysis[S].
[13]	Huang Huanming(黄欢明),Pan Weiming(潘卫明),Feng Huihua(冯慧华).Impact investigation of assembly status on supporting function for cryogenic vessel's bearing structure[J].Cryogenics(低温工程),2012,188(4):44-49.
[14]	Xu Miaofu(徐妙富),Liu Baoqing(刘宝庆),Jiang Jialing(蒋家羚),Jin Zhijiang(金志江).Finite element analysis of strength of mobile cryogenic LNG storage tank[J].Cryogenics(低温工程),2010,173(1):11-16.
[15]	Li Yang(李阳),Wang Rongshun(汪荣顺),Wang Caili(王彩莉).The stress analysis and optimum of the cryogenic insulated-cylinders under the inertia force based on ANSYS[J].Cryogenics & Superconductivity(低温与超导),2009,37(11):5-9.
[16]	Yao Zhiyan(姚志燕),He Yuanxin(何远新),Li Yongtai(李永泰),Wu Xiaohong(吴晓红),Guo Chunguang(郭春光).Optimization design of connecting structure between inner vessel and outer jacket for multimodal transport liquefied natural gas(LNG)tank[J].Pressure Vessel Technology(压力容器),2014,31(12):23-30.
[17]	Javed Hyder M,Asif M. Optimization of location and size of opening in a pressure vessel cylinder using ANSYS[J].Engineering Failure Analysis,2008,15(1/2):1-19.
[18]	Xu Bingye(徐秉业),Liu Xinsheng(刘信声).Application of Elastic-Plastic Mechanics(应用弹塑性力学)[M].Beijing:Tsinghua University Press,1995:183-130.
[19]	TSG R0005-2011 Supervision regulation on safety technology for transportable pressure vessel[S].
[20]	Ding Chang(丁昌),Wang Rongshun(汪荣顺). Appli-cation of ANSYS in stress analysis and optimization design of cryogenic pressure vessels[J].Cryogenics & Super-conductivity(低温与超导),2007,35(6):455-457.

惯性力作用下船用液化天然气储罐的应力分析

Stress analysis of LNG storage tank for ships under inertial force

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 20

相关文章 15

编辑推荐

Metrics

本文评价

[1]	叶展羽, 山訸, 徐震原. 用于太阳能蒸发的折纸式蒸发器性能仿真[J]. 化工学报, 2023, 74(S1): 132-140.
[2]	张义飞, 刘舫辰, 张双星, 杜文静. 超临界二氧化碳用印刷电路板式换热器性能分析[J]. 化工学报, 2023, 74(S1): 183-190.
[3]	王志国, 薛孟, 董芋双, 张田震, 秦晓凯, 韩强. 基于裂隙粗糙性表征方法的地热岩体热流耦合数值模拟与分析[J]. 化工学报, 2023, 74(S1): 223-234.
[4]	宋嘉豪, 王文. 斯特林发动机与高温热管耦合运行特性研究[J]. 化工学报, 2023, 74(S1): 287-294.
[5]	张思雨, 殷勇高, 贾鹏琦, 叶威. 双U型地埋管群跨季节蓄热特性研究[J]. 化工学报, 2023, 74(S1): 295-301.
[6]	连梦雅, 谈莹莹, 王林, 陈枫, 曹艺飞. 地下水预热新风一体化热泵空调系统制热性能研究[J]. 化工学报, 2023, 74(S1): 311-319.
[7]	金正浩, 封立杰, 李舒宏. 氨水溶液交叉型再吸收式热泵的能量及分析[J]. 化工学报, 2023, 74(S1): 53-63.
[8]	王浩, 王振雷. 基于自适应谱方法的裂解炉烧焦模型化简策略[J]. 化工学报, 2023, 74(9): 3855-3864.
[9]	李科, 文键, 忻碧平. 耦合蒸气冷却屏的真空多层绝热结构对液氢储罐自增压过程的影响机制研究[J]. 化工学报, 2023, 74(9): 3786-3796.
[10]	何松, 刘乔迈, 谢广烁, 王斯民, 肖娟. 高浓度水煤浆管道气膜减阻两相流模拟及代理辅助优化[J]. 化工学报, 2023, 74(9): 3766-3774.
[11]	邢雷, 苗春雨, 蒋明虎, 赵立新, 李新亚. 井下微型气液旋流分离器优化设计与性能分析[J]. 化工学报, 2023, 74(8): 3394-3406.
[12]	韩晨, 司徒友珉, 朱斌, 许建良, 郭晓镭, 刘海峰. 协同处理废液的多喷嘴粉煤气化炉内反应流动研究[J]. 化工学报, 2023, 74(8): 3266-3278.
[13]	于旭东, 李琪, 陈念粗, 杜理, 任思颖, 曾英. 三元体系KCl + CaCl₂ + H₂O 298.2、323.2及348.2 K相平衡研究及计算[J]. 化工学报, 2023, 74(8): 3256-3265.
[14]	诸程瑛, 王振雷. 基于改进深度强化学习的乙烯裂解炉操作优化[J]. 化工学报, 2023, 74(8): 3429-3437.
[15]	闫琳琦, 王振雷. 基于STA-BiLSTM-LightGBM组合模型的多步预测软测量建模[J]. 化工学报, 2023, 74(8): 3407-3418.