化工学报 ›› 2016, Vol. 67 ›› Issue (10): 4508-4513.DOI: 10.11949/j.issn.0438-1157.20160131

• 材料化学工程与纳米技术 • 上一篇    下一篇

高阻尼性涂层用环氧-丙烯酸酯复合乳液的合成

杜朋亚, 边锋, 姚蒙蒙, 常达, 唐二军   

  1. 河北科技大学化学与制药工程学院, 河北省药物化工工程技术研究中心, 河北 石家庄 050018
  • 收稿日期:2016-01-29 修回日期:2016-04-29 出版日期:2016-10-05 发布日期:2016-10-05
  • 通讯作者: 唐二军
  • 基金资助:

    国家自然科学基金项目(21304030);河北省科技计划项目(15391201D)。

Synthesis of core-shell epoxy/polyacrylate composite particle with high damping property

DU Pengya, BIAN Feng, YAO Mengmeng, CHANG Da, TANG Erjun   

  1. Hebei Research Center of Pharmaceutical and Chemical Engineering, College of Chemical and Pharmaceutical Engineering, Hebei University of Science and Technology, Shijiazhuang 050018, Hebei, China
  • Received:2016-01-29 Revised:2016-04-29 Online:2016-10-05 Published:2016-10-05
  • Supported by:

    supported by the National Natural Science Foundation of China (21304030) and the Project of Hebei Province Science and Technology (15391201D).

摘要:

采用分步乳液聚合法合成了一种具有核-壳结构的环氧-丙烯酸酯复合乳液,通过核层和壳层之间的化学交联使涂膜具有较高的阻尼性能。通过透射电镜观察到乳胶粒子呈均匀的核-壳球形结构,红外光谱(FTIR)结果表明复合乳液涂膜实现了环氧与丙烯酸树脂的交联反应。动态热机械分析(DMA)显示该乳液涂膜具有较高的损耗因子和较宽的阻尼温域,加热成膜的最大损耗因子(tan δ)达到2.12,明显高于传统阻尼涂料,在tan δ >0.3的阻尼温域为40℃,在金属阻尼涂层材料领域具有良好的应用潜能。

关键词: 环氧树脂, 聚丙烯酸酯, 核-壳结构, 高阻尼性, 复合材料, 乳液, 合成

Abstract:

An epoxy/polyacrylate (EP/PA) composite particles with core-shell structure was synthesized by two-stage emulsion polymerization. The high damping property was obtained by cross-linking reaction between core layer and shell layer. TEM showed that the composite particles had a spherical morphology with a core-shell structure 120nm size. Fourier transform infrared spectra (FTIR) indicated the cross-linking between EP groups in core and carboxyl groups in shell during film formation of composite particles. The cross-linking reaction improved the dynamic mechanical property by combining the core and shell polymers. DMA (dynamic mechanical analysis) results revealed that the coatings of composite latex presented a markedly loss factor (tanδ) and widen damping temperature range. The highest peak values of tanδ of the composite materials by heating formation film could reach 2.12, which exceeded the value of the traditional damping coatings. The damping temperature range (tan δ≥0.3) could reach to 40℃. It indicated that the composite material presented an obvious application potentials in the field of metal damping coatings.

Key words: epoxy resin, polyacrylate, core-shell structure, high damping capacity, composite materials, emulsions, synthesis

中图分类号: