MIG焊接V型熔池特性的数理模型建立

doi:10.11949/j.issn.0438-1157.20160625

化工学报 ›› 2016, Vol. 67 ›› Issue (S1): 117-126.DOI: 10.11949/j.issn.0438-1157.20160625

MIG焊接V型熔池特性的数理模型建立

彭晶楠^1,2, 杨立新^1,2

1 北京交通大学机械与电子控制工程学院热能工程研究所, 北京 100044;
2 微细尺度流动与相变传热北京市重点实验室, 北京 100044

收稿日期:2016-05-09 修回日期:2016-05-19 出版日期:2016-08-31 发布日期:2016-08-31
通讯作者: 杨立新,lxyang1@bjtu.edu.cn
基金资助:
国家自然科学基金项目（51376022）。

Mathematical model on characteristics of V groove molten pool during MIG welding

PENG Jingnan^1,2, YANG Lixin^1,2

1 Institute of Thermal Engineering, School of Mechanical, Electronic and Control Engineering, Beijing Jiaotong University, Beijing 100044, China;
2 Beijing Key Laboratory of Flow and Heat Transfer of Phase Changing in Micro and Small Scale, Beijing 100044, China

Received:2016-05-09 Revised:2016-05-19 Online:2016-08-31 Published:2016-08-31
Supported by:
supported by the National Natural Science Foundation of China (51376022).

摘要/Abstract

摘要：

通过对MIG坡口焊接工艺过程的分析将三维焊接物理过程简化为二维数理模型，建立移动高斯热源模型用于描述电弧与工件的热作用，建立熔池内的CFD模型用以描述熔池内熔化／凝固过程的流动传热传质现象，对典型V型坡口焊接过程进行实验和数值模拟研究，通过与实验得到的工件截面金相图对比分析验证了数理模型的准确性，最后对数理模型中高斯热源参数及熔池流动的驱动力机理模型进行了进一步讨论。结果表明通过合理的模型参数选择二维数理模型可以准确地分析MIG坡口焊过程熔池的演变过程。

关键词: MIG焊, 熔池, V型坡口, Marangoni流, 数值模拟, 界面张力, 模型

Abstract:

Through analyze the MIG groove welding process and the welding experimental result, the physical process of 3D welding was simplified as a two dimensional mathematical model. For mathematical model establishment, based on the analysis of experimental results, established a two-dimensional mathematical model of welding seam section welding physical process. This model included the welding heat source model and molten pool phase change flow CFD model. The moving Gauss heat source model was used to describe the heat effect of arc and workpiece. By introducing scalar of liquid fraction, mushy region dynamic character which was described using "Darcy" model proposed for porous media, and phase change which was taken into account using source-based method, new CFD model was established to simulate transient heat and mass transfer phenomena in welding process. Comparative analysis the numerical simulation result and the metallographic figure, corrected the moving gauss heat source model parameters. Analyze the molten pool shape influenced by thermal buoyancy and Marangoni force in CFD model. Through comparative analysis the results of numerical simulation and experimental, verified the accuracy of the mathematical model. A further discussion on Gauss heat source parameters and the driving force mechanism model of molten pool flow was made. Results showed that through the reasonable model parameters selection, two-dimensional mathematical model can accurate analysis the evolution of V groove molten pool during MIG welding.

Key words: MIG welding, welding pool, V groove, Marangoni flow, numerical simulation, interfacial tension, model

中图分类号:

TK124

彭晶楠, 杨立新. MIG焊接V型熔池特性的数理模型建立[J]. 化工学报, 2016, 67(S1): 117-126.

PENG Jingnan, YANG Lixin. Mathematical model on characteristics of V groove molten pool during MIG welding[J]. CIESC Journal, 2016, 67(S1): 117-126.

参考文献 26

[1]	HU J, TSAI H L. Heat and mass transfer in gas metal arc welding (Ⅰ):The arc[J]. International Journal of Heat and Mass Transfer, 2007, 50(5/6):833-846.
[2]	HU J, TSAI H L. Heat and mass transfer in gas metal arc welding (Ⅱ):The metal[J]. International Journal of Heat and Mass Transfer, 2007, 50(5/6):808-820.
[3]	HU Y, HE X, YU G, et al. Heat and mass transfer in laser dissimilar welding of stainless steel and nickel[J]. Applied Surface Science, 2012, 258(15):5914-5922.
[4]	HU J, TSAI H L. Modelling of transport phenomena in 3D GMAW of thick metals with V groove[J]. Journal of Physics D:Applied Physics, 2008, 41(6):065202.
[5]	CHEN J, SCHWENK C, WU C S, et al. Predicting the influence of groove angle on heat transfer and fluid flow for new gas metal arc welding processes[J]. International Journal of Heat and Mass Transfer, 2011, 55(1/2/3):102-111.
[6]	CHO D W, NA S J, CHO M H, et al. Simulations of weld pool dynamics in V-groove GTA and GMA welding[J]. Welding in the World, 2013, 57(2):223-233.
[7]	CHO D W, NA S J, CHO M H, et al. A study on V-groove GMAW for various welding positions[J]. Journal of Materials Processing Technology, 2013, 213(9):1640-1652.
[8]	CHO D W, NA S J. Molten pool behaviors for second pass V-groove GMAW[J]. International Journal of Heat and Mass Transfer, 2015, 88:945-956.
[9]	CHO D W, LEE S H, NA S J. Characterization of welding arc and weld pool formation in vacuum gas hollow tungsten arc welding[J]. Journal of Materials Processing Technology, 2013, 213:143-152.
[10]	CHOO R T C, SZEKELY J. Vaporization kinetics and surface temperature in a mutually coupled spot gas tungsten arc weld and weld pool[J]. Welding Journal, 1992, 71(3):77-93.
[11]	PENG X F, LIN X P. Effect of initial molten pool and marangoni flow on solid melting[J]. International Journal of Heat Mass Transfer, 2001, 44(2):457-470.
[12]	ABDERRAZAK K, KRIAA W, BEN SALEM W, et al. Numerical and experimental studies of molten pool formation during an interaction of a pulse laser (Nd:YAG) with a magnesium alloy[J]. Optics & Laser Technology, 2009, 41(4):470-480.
[13]	ABDERRAZAK K, BANNOUR S, MHIRI H, et al. Numerical and experimental study of molten pool formation during continuous laser welding of AZ91 magnesium alloy[J]. Computational Materials Science, 2009, 44(3):858-866.
[14]	BANNOUR S, ABDERRAZAK K, MHIRI H, et al. Effects of temperature-dependent material properties and shielding gas on molten pool formation during continuous laser welding of AZ91 magnesium alloy[J]. Optics & Laser Technology, 2012, 44(8):2459-2468.
[15]	HE X, FUERSCHBACH P W, DEBROY T. Heat transfer and fluid flow during laser spot welding of 304 stainless steel[J]. Journal of Applied Physics, 2003, 36(12):1388-1398.
[16]	JOHN G, ADITYA C, MALCOLM B. A new finite element model for welding heat sources[J]. Metallurgical Transactions B, 1984, 15(2):299-305.
[17]	RAMIREZ A J, BRANDI S D. Application of discrete distribution point heat source model to simulate multipass weld thermal cycles in medium thick plates[J]. Science and Technology of Welding and Joining, 2004, 9(1):72-82.
[18]	TSAI N S, EAGAR T W. Distribution of the heat and current fluxes in gas tungsten arcs[J]. Metallurgical Transactions B, 1985, 16(4):841-846.
[19]	CARMIGNANI C, MARES R, TOSELLI G. Transient finite element analysis of deep penetration laser welding process in a singlepass butt-welded thick steel plate[J]. Computer Methods in Applied Mechanics and Engineering, 1999, 179(3):197-214.
[20]	MURUGAN S, GILL T P S, KUMAR P V, et al. Numerical modelling of temperature distribution during multipass welding of plates[J]. Science and Technology of Welding & Joining, 2000, 5(4):208-214.
[21]	武传松. 焊接热过程与熔池形态[M]. 北京:机械工业出版社, 2008:171-206. WU C S. Welding Heat Process and Molten Pool Shape[M]. Beijing:China Machine Press, 2008:171-206.
[22]	YANG L X, PENG X F, WANG B X. A numerical analysis of melting and solidification during laser processing[J]. Journal of Engineering Thermophysics, 2001, 22(1):133-136.
[23]	袁幸福, 柯家俊, 李晶. 金属及合金的表面张力[M]. 北京:科学出版社, 2006:21. YUAN X F, KE J J, LI J. Surface Tension of Metals and Alloys[M]. Beijing:Science Press, 2006:21.
[24]	GOLDAK J, BIBBY M, MOORE J. Computer modeling of heat flow in welds[J]. Metallurgical Transactions B, 1986, 17(3):587-600.
[25]	OREPER G M. Heat and fluid flow phenomena in weld pools[J]. Journal of Fluid Mechanics, 1984, 147(1):53-79.
[26]	OREPER G M, EAGAR T W, SZEKELY J. Convection in arc weld pools[J]. Welding Journal, 1983, 62(9):307-312.

MIG焊接V型熔池特性的数理模型建立

Mathematical model on characteristics of V groove molten pool during MIG welding

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献 26

相关文章 15

编辑推荐

Metrics

本文评价

[1]	宋嘉豪, 王文. 斯特林发动机与高温热管耦合运行特性研究[J]. 化工学报, 2023, 74(S1): 287-294.
[2]	张思雨, 殷勇高, 贾鹏琦, 叶威. 双U型地埋管群跨季节蓄热特性研究[J]. 化工学报, 2023, 74(S1): 295-301.
[3]	连梦雅, 谈莹莹, 王林, 陈枫, 曹艺飞. 地下水预热新风一体化热泵空调系统制热性能研究[J]. 化工学报, 2023, 74(S1): 311-319.
[4]	金正浩, 封立杰, 李舒宏. 氨水溶液交叉型再吸收式热泵的能量及分析[J]. 化工学报, 2023, 74(S1): 53-63.
[5]	叶展羽, 山訸, 徐震原. 用于太阳能蒸发的折纸式蒸发器性能仿真[J]. 化工学报, 2023, 74(S1): 132-140.
[6]	张义飞, 刘舫辰, 张双星, 杜文静. 超临界二氧化碳用印刷电路板式换热器性能分析[J]. 化工学报, 2023, 74(S1): 183-190.
[7]	王志国, 薛孟, 董芋双, 张田震, 秦晓凯, 韩强. 基于裂隙粗糙性表征方法的地热岩体热流耦合数值模拟与分析[J]. 化工学报, 2023, 74(S1): 223-234.
[8]	王浩, 王振雷. 基于自适应谱方法的裂解炉烧焦模型化简策略[J]. 化工学报, 2023, 74(9): 3855-3864.
[9]	李科, 文键, 忻碧平. 耦合蒸气冷却屏的真空多层绝热结构对液氢储罐自增压过程的影响机制研究[J]. 化工学报, 2023, 74(9): 3786-3796.
[10]	何松, 刘乔迈, 谢广烁, 王斯民, 肖娟. 高浓度水煤浆管道气膜减阻两相流模拟及代理辅助优化[J]. 化工学报, 2023, 74(9): 3766-3774.
[11]	韩晨, 司徒友珉, 朱斌, 许建良, 郭晓镭, 刘海峰. 协同处理废液的多喷嘴粉煤气化炉内反应流动研究[J]. 化工学报, 2023, 74(8): 3266-3278.
[12]	邢雷, 苗春雨, 蒋明虎, 赵立新, 李新亚. 井下微型气液旋流分离器优化设计与性能分析[J]. 化工学报, 2023, 74(8): 3394-3406.
[13]	于旭东, 李琪, 陈念粗, 杜理, 任思颖, 曾英. 三元体系KCl + CaCl₂ + H₂O 298.2、323.2及348.2 K相平衡研究及计算[J]. 化工学报, 2023, 74(8): 3256-3265.
[14]	诸程瑛, 王振雷. 基于改进深度强化学习的乙烯裂解炉操作优化[J]. 化工学报, 2023, 74(8): 3429-3437.
[15]	闫琳琦, 王振雷. 基于STA-BiLSTM-LightGBM组合模型的多步预测软测量建模[J]. 化工学报, 2023, 74(8): 3407-3418.