CIESC Journal ›› 2024, Vol. 75 ›› Issue (2): 505-519.DOI: 10.11949/0438-1157.20231100

• Fluid dynamics and transport phenomena • Previous Articles     Next Articles

CFD numerical simulation of wet flue gas desulfurization:performance improvement based on gas-liquid mass transfer enhancement

Wenjun LI1(), Zhongyang ZHAO1, Zhen NI2, Can ZHOU2, Chenghang ZHENG1,2(), Xiang GAO1,2   

  1. 1.Zhejiang Baima Lake Laboratory Co. , Ltd. , Hangzhou 310007, Zhejiang, China
    2.College of Energy Engineering, Zhejiang University, Hangzhou 310027, Zhejiang, China
  • Received:2023-10-26 Revised:2024-01-09 Online:2024-04-10 Published:2024-02-25
  • Contact: Chenghang ZHENG

基于气-液传质强化的湿法烟气脱硫CFD模拟研究

李文俊1(), 赵中阳1, 倪震2, 周灿2, 郑成航1,2(), 高翔1,2   

  1. 1.浙江省白马湖实验室有限公司,浙江 杭州 310007
    2.浙江大学能源工程学院,浙江 杭州 310027
  • 通讯作者: 郑成航
  • 作者简介:李文俊(1999—),男,硕士,工程师,liwenjun01@zjenergy.com.cn
  • 基金资助:
    浙江省“尖兵”研发攻关计划项目(2023C03008);国家重点研发计划项目(2022YFC3701500)

Abstract:

In view of the desulfurization problem of flue gas containing high SO2 concentration resulting from burning high sulfur coal in flue gas desulfurization process of coal-fired power plants, the research on the high-efficient SO2 removal based onlimestone was carried out by computational fluid dynamics (CFD), and the enhancement method for SO2 removal by installing sieve plate and optimizing the spray system in the absorption tower simultaneously was proposed. A coupled model of SO2 multiform absorption including spray absorption and bubbling absorption was established at the scale of macro scale. Based on the model, the variation laws of pH and SO2 absorption rate during slurry droplets falling were obtained, and the gas-liquid flow, mass transfer and chemical reaction processes in the absorption tower are analyzed. The strengthening mechanism of sieve plate on the desulfurization efficiency is explored, and the optimization for the arrangement of sieve plate and spray system is carried out further. It was found that by optimizing the sieve plate components and the spray system in the tower, the SO2 removal efficiency of the desulfurization tower can be increased by 3%—8% under different working conditions.

Key words: absorption, CFD, optimal design, gas-liquid mass transfer enhancement, SO2 removal

摘要:

针对燃煤电厂烟气脱硫过程中,高硫煤燃烧产生的高含硫烟气高效脱硫难题,通过计算流体力学(CFD)开展了钙法烟气SO2高效脱除研究,提出了基于塔内筛板构件及喷淋系统优化的多手段耦合增效方法。建立了宏观脱硫塔尺度下涵盖喷淋吸收-筛板鼓泡吸收的SO2多形式吸收脱除耦合模型,获得了浆液下落过程中的pH及SO2吸收速率变化规律,并研究了湍流构件对脱硫塔内的气液混合流动、相内相间传质、浆液内部化学反应等过程的影响机制。探究了筛板对于脱硫塔脱除效率的强化机制,并进一步开展了筛板布置位置优化设计研究。同时,针对脱硫塔喷淋系统开展了优化设计研究,通过对比研究获得了喷淋系统优化后布置方案。基于所提出的脱硫塔多手段耦合增效方法,研究了包括液气比、浆液粒径及入口烟气SO2浓度等不同参数影响下的脱硫塔SO2脱除性能,发现通过塔内筛板构件及喷淋系统优化多手段协同增效后,可实现不同工况下脱硫塔SO2脱除效率提升3%~8%。

关键词: 吸收, 计算流体力学, 优化设计, 气-液传质强化, SO2脱除

CLC Number: