化工学报 ›› 2015, Vol. 66 ›› Issue (6): 2313-2320.DOI: 10.11949/j.issn.0438-1157.20150076

• 材料化学工程与纳米技术 • 上一篇    下一篇

超临界流体干燥技术制备液相色谱填料基质多孔硅球

孟繁梅, 吕惠生, 张敏华, 李永辉, 连峰, 孙艳朋   

  1. 天津大学石油化工技术开发中心, 教育部绿色合成与转化重点实验室, 天津 300072
  • 收稿日期:2015-01-20 修回日期:2015-03-18 出版日期:2015-06-05 发布日期:2015-06-05
  • 通讯作者: 李永辉

Preparation of porous silica microspheres as packing matrix of HPLC with supercritical drying process

MENG Fanmei, LÜ Huisheng, ZHANG Minhua, LI Yonghui, LIAN Feng, SUN Yanpeng   

  1. Key Laboratory for Green Chemical Technology of Ministry of Education, R&D Center for Petrochemical Technology, Tianjin University, Tianjin 300072, China
  • Received:2015-01-20 Revised:2015-03-18 Online:2015-06-05 Published:2015-06-05

摘要:

以正硅酸乙酯(TEOS)为硅源, 采用溶胶-凝胶结合超临界CO2干燥制得高纯度微米级液相色谱填料基质多孔硅球。采用BET, TG-DTG, SEM, FT-IR, XRD和激光粒度仪等表征方法对样品进行分析, 考察真空干燥(WO)、超临界CO2间歇干燥(SCF-I)和超临界CO2连续干燥(SCF-C) 3种干燥工艺的可行性, 结果表明, 真空干燥、ScCO2间歇干燥和ScCO2连续干燥得到的多孔硅球比表面积分别为69.04、268.40和513.41 m2·g-1。采用ScCO2干燥法能够大幅度提高多孔硅球产品的比表面积。参照色谱填料理论最佳比表面积为300 m2·g-1可知, ScCO2间歇干燥较ScCO2连续干燥更适合应用于液相色谱填料基质多孔硅球的制备。ScCO2间歇干燥法制得硅胶微球球形规则且无团聚现象, 孔体积为0.5758 m3·g-1, 平均粒径(D50)为3 μm, 呈典型高斯分布, 且分布范围较窄, 为1~7 μm。

关键词: 色谱, 超临界流体, 二氧化硅, 超临界CO2间歇干燥, 超临界CO2连续干燥, 真空干燥

Abstract:

Silica microspheres are of great interest in several areas such as liquid chromatography, medicine, biochemistry, colloidal chemistry and aerosol research. In this work, porous silica microspheres as packing matrix of HPLC were prepared from tetraethoxysilane (TEOS) by Sol-Gel method with carbon dioxide supercritical fluid drying technique. Conventional high-temperature vacuum dying (WO), intermittent supercritical fluid drying (SCF-I) and continuous supercritical fluid drying process (SCF-C) were discussed. Silica microspheres were characterized by BET, TG-DTG, SEM, FT-IR, XRD and zetasizer analysis system. The results showed that the silica particles with spherical morphology were successfully prepared by all of the three processes and agglomeration was avoided. The specific surface area of silica microspheres was 69.04, 268.40 and 513.41 m2·g-1 prepared by WO, SCF-I and SCF-C, respectively. The specific surface area of porous silica microspheres obtained by supercritical fluid drying was higher than that obtained by vacuum drying. SCF-I process was the optimum selection for the packing matrix of HPLC. Silica microspheres obtained by SCF-I were mostly regular-ball with specific pore volume of 0.5758 m3·g-1 without particle agglomeration. The mean particle size (D50) was 3 μm and the particle size distribution followed typical Gaussian distribution with a narrow particle size varied from 1 mm to 7 μm.

Key words: chromatography, supercritical fluid, silica, intermittent supercritical fluid drying, continuous supercritical fluid drying, vacuum drying

中图分类号: