两段反应串联的二氯乙烷、氯化氢氧氯化制三、四氯乙烯

doi:10.11949/j.issn.0438-1157.20150794

化工学报 ›› 2015, Vol. 66 ›› Issue (8): 3064-3071.DOI: 10.11949/j.issn.0438-1157.20150794

• 催化、动力学与反应器 • 上一篇下一篇

两段反应串联的二氯乙烷、氯化氢氧氯化制三、四氯乙烯

花海^1,2, 崔咪芬², 费兆阳^1,2, 陈献², 汤吉海², 乔旭^1,2

1 南京工业大学材料化学工程国家重点实验室, 江苏南京 210009;
2 南京工业大学化学化工学院, 江苏南京 210009

收稿日期:2015-06-02 修回日期:2015-06-09 出版日期:2015-08-05 发布日期:2015-08-05
通讯作者: 崔咪芬
基金资助:
国家科技支撑计划课题项目(2011BAE18B01)。

Preparation of TCE and PCE by oxychlorination of EDC and HCl with two-stage series reaction

HUA Hai^1,2, CUI Mifen², FEI Zhaoyang^1,2, CHEN Xian², TANG Jihai², QIAO Xu^1,2

1 State Key Laboratory of Materials-Oriented Chemical Engineering, Nanjing Tech University, Nanjing 210009, Jiangsu, China;
2 College of Chemistry and Chemical Engineering, Nanjing Tech University, Nanjing 210009, Jiangsu, China

Received:2015-06-02 Revised:2015-06-09 Online:2015-08-05 Published:2015-08-05
Supported by:
supported by the National Science & Technology Pillar Program (2011BAE18B01).

摘要/Abstract

摘要：

为高效、环保地生产三、四氯乙烯,同时解决副产氯化氢的出路问题,通过对二氯乙烷氧氯化制三、四氯乙烯反应体系的剖析,提出以氯化氢为氯源的两段反应串联新工艺。在第1段中仅仅发生氯化氢氧化反应,第2段中二氯乙烷与生成的氯气及未反应完的氧气发生一系列氧氯化反应制三、四氯乙烯。该工艺有效避免了二氯乙烷及其他有机氯的深度氧化;而且采用该工艺,每一段可采用不同的催化剂和不同的反应条件,以适应不同的反应需求。第2段采用的催化剂是在第1段采用的负载于Y分子筛的Ce-Cu-K复合催化剂基础上改性优化而成,适宜的钾铜质量比为0.73;当催化剂活性组分负载量达到45.5%时,三、四氯乙烯收率最优。同时对第2段反应条件进行了优化,结果表明适宜的工艺条件为:反应温度430℃,二氯乙烷重时空速0.5 h^-1,二氯乙烷、氯化氢与氧气三者的进料摩尔比1:2.4:1.8;此时三、四氯乙烯收率最高可达83.4%,有机氯的总收率可达96.1%。反应结果较单段氧氯化反应工艺显著提升,具有良好的工业应用前景。

关键词: 氧氯化, 三氯乙烯, 四氯乙烯, 流化床, Y分子筛, 两段反应

Abstract:

For the efficient and eco-friendly preparation of trichloroethylene (TCE) and perchloroethylene (PCE), as well as the application of byproduct HCl, a process composed of a two-stage series reaction was firstly proposed using HCl as the chlorine source. Oxidation of HCl to Cl₂ was carried out in the first stage of the process, and the second stage of the process was the oxychlorination of EDC with generated Cl₂and unreacted O₂ in the first stage to TCE and PCE. These reactions were carried out in series so that the deep oxidation reactions were effectively avoided. In addition, by using the two-stage process, different catalysts and process parameters could be applied in each stage to meet the different reaction needs. The complex Ce-Cu-K/Y catalyst was used in the first stage, and it was applied in the second stage with optimized loading of the active component. The appropriate loadings of K/Cu (mass ratio) and the active component were 0.73 and 45.5%, respectively. Meanwhile, the operation conditions in the second stage of the process were optimized. 83.4% yield of both TCE and PCE, 96.1% yield of organochloride could be obtained at 430℃ with 0.5 h^-1 weight hourly space velocity (WHSV) of EDC, molar ratio of O₂ to EDC 1.8, and molar ratio of O₂ to EDC 2.4. The results presented an encouraging prospect in industrial application.

Key words: oxychlorination, trichloroethylene, perchloroethylene, fluidized-bed, Y-molecular sieves, two-stage reactions

中图分类号:

花海, 崔咪芬, 费兆阳, 陈献, 汤吉海, 乔旭. 两段反应串联的二氯乙烷、氯化氢氧氯化制三、四氯乙烯[J]. 化工学报, 2015, 66(8): 3064-3071.

HUA Hai, CUI Mifen, FEI Zhaoyang, CHEN Xian, TANG Jihai, QIAO Xu. Preparation of TCE and PCE by oxychlorination of EDC and HCl with two-stage series reaction[J]. CIESC Journal, 2015, 66(8): 3064-3071.

参考文献 22

[1]	Sutherland I W, Hamilton N G, Dudman C C, Jones P, Lennon D, Winfield J M. Chlorination and dehydrochlorination reactions relevant to the manufacture of trichloroethene and tetrachloroethene. Reaction pathways [J]. Applied Catalysis A-General, 2011, 399 (1/2): 1-11.
[2]	Kang Hongjie (康宏杰), Zhong Jinian (钟继年), Du Juan (杜娟). Method for preparing trichloroethylene and perchloroethylene from dichloroethane as raw material [P]: CN, 201110125629.5. 2011-12-07.
[3]	Jiang Zhenghui (江政辉), Zhong Jinguang (钟劲光), Wu Ming (吴明). Method for preparing tetrachloroethylene by pentachloroethane gas phase catalysis method [P]: CN, 201310072018.8. 2013-05-22.
[4]	Guo Ge (郭戈), Cheng Xinyu (程新玉), Zhao Zhengdong (赵正东), Li Honglin (李红林), Yin Jiexin (殷杰信), Huang Zehua (黄泽华). Industrial preparation method for tetrachloroethylene [P]: CN, 201210286513.4. 2012-12-12.
[5]	Liu Shigang (刘世刚). Tetrachloroethylene production device and method [P]: CN, 201310071626.7. 2013-05-22.
[6]	Gorton E M, Mcgreevy R E. Process for making tetrachloroethylene [P]: US, 4002695. 1977-01-11.
[7]	Berkowitz S, Prak H, Meadow M. Oxychlorination process for preparing trichloroethylene and tetrachloroethylene [P]: US, 3527819. 1970-09-08.
[8]	Diamond L H, Yardley P, Lobunez W. Catalysts for oxychlorination reactions [P]: US, 3360483. 1967-12-26.
[9]	Bohl L E, Vancamp R M. Production of perchloroethylene and trichloroethylene utilizing oxychlorination reaction [P]: US, 3642918. 1972-02-15.
[10]	Bohl L E, Vancamp R M. Particle size control in fluidized oxychlorination reaction [P]: US, 3296319. 1967-01-03.
[11]	Chen Xian (陈献), Qiao Xu (乔旭), Cui Mifen (崔咪芬), Tang Jihai (汤吉海). Study on oxidation of HCl over RE-Cu-K/Y-zeolite catalyst [J]. Chemical Reaction Engineering and Technology (化学反应工程与工艺), 2007, 23 (5): 477-480.
[12]	Chen Xian (陈献), Qiao Xu (乔旭), Tang Jihai (汤吉海), Cui Mifen (崔咪芬). Preparation and catalytic performance of rare earth composite molecular sieve catalyst [J]. Journal of Chemical Engineering of Chinese Universities (高校化学工程学报), 2008, 22 (1): 118-121.
[13]	Chen Xian (陈献), Lü Gaoming (吕高明), Tang Jihai (汤吉海), Cui Mifen (崔咪芬), Zhou Zhe (周哲), Cao Rui (曹锐), Qiao Xu (乔旭). Research on preparation of nano complex Ce-Cu-K catalyst loaded in the Y-type zeolite and its performance [J]. Journal of Chemical Engineering of Chinese Universities (高校化学工程学报), 2011, 25 (1): 109-113.
[14]	Cao Rui (曹锐), Fei Zhaoyang (费兆阳), Chen Xian (陈献), Tang Jihai (汤吉海), Cui Mifen (崔咪芬), Qiao Xu (乔旭). Synergetic effect of CuO and CeO2 on hydrogen chloride catalytic oxidation [J]. Chemical Reaction Engineering and Technology (化学反应工程与工艺), 2013, 29 (4): 295-300.
[15]	Xie Xingxing (谢兴星), Fei Zhaoyang (费兆阳), Dai Yong (戴勇), Xu Xihua (徐希化), Chen Xian (陈献), Tang Jihai (汤吉海), Cui Mifen (崔咪芬), Qiao Xu (乔旭). Structure of ceria-based mixed oxides and its influence on HCl catalytic oxidation performance [J]. Journal of Molecular Catalysis (China) (分子催化), 2014, 28 (6): 507-514.
[16]	Bryukov M G, Slagle I R, Knyazev V D. Kinetics of reactions of Cl atoms with ethane, chloroethane, and 1,1-dichloroethane [J]. The Journal of Physical Chemistry A, 2003, 107 (34): 6565-6573.
[17]	Liu J, Lu X J, Zhou G D, Zhen Kaiji, Zhang Wenxiang, Cheng Tiexin. Effect of KCl on CuCl2/gamma-Al2O3 catalyst for oxychlorination of ethane [J]. React. Kinet. Catal. Lett., 2006, 88 (2): 315-323.
[18]	Qin Yue (秦越), Zhang Wei (张伟), Wang Bo (王博), Ma Yangbo (马洋博), Mao Wei (毛伟), Lü Jian (吕剑). Research advance on catalysts for synthesis of hydrofluoroolefins by dehydrohalogenation reaction [J]. New Chemical Materials (化工新型材料), 2011, 39 (12): 34-37.
[19]	Wang Yao (王垚), Di Zouxing (狄佐星), Li Yuxin (李玉新), Wei Fei (魏飞). Multiphase catalytic reactors for methanol-to-olefins [J]. CIESC Journal (化工学报), 2014, 65 (7): 2474-2484.
[20]	Fei Zhaoyang, Liu Haoyue, Dai Yong, Ji Weijie, Chen Xian, Tang Jihai, Cui Mifen, Qiao Xu. Efficient catalytic oxidation of HCl to recycle Cl2 over the CuO-CeO2 composite oxide supported on Y type zeolite [J]. Chemical Engineering Journal, 2014, 257: 273-280.
[21]	Chang Peiting (常培廷), Hu Gangshi (胡刚石), Han Minghan (韩明汉), Wu Qin (吴勤), Wei Fei (魏飞), Jin Yong (金涌). Conversion of hydrogen chloride to chlorine in a two-zone circulating fluidized bed reactor [J]. The Chinese Journal of Process Engineering (过程工程学报), 2006, 6 (1): 47-50.
[22]	Wang Lunwei (王伦伟), Han Minghan (韩明汉), Wu Yulong (吴玉龙), Jin Yong (金涌). Conversion of hydrogen chloride to chlorine by catalytic oxidation [J]. The Chinese Journal of Process Engineering (过程工程学报), 2003, 3 (4): 340-345.

两段反应串联的二氯乙烷、氯化氢氧氯化制三、四氯乙烯

Preparation of TCE and PCE by oxychlorination of EDC and HCl with two-stage series reaction

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 22

相关文章 15

编辑推荐

Metrics

本文评价

[1]	张媛媛, 曲江源, 苏欣欣, 杨静, 张锴. 循环流化床燃煤机组SNCR脱硝过程气液传质和反应特性[J]. 化工学报, 2023, 74(6): 2404-2415.
[2]	杨峥豪, 何臻, 常玉龙, 靳紫恒, 江霞. 生物质快速热解下行式流化床反应器研究进展[J]. 化工学报, 2023, 74(6): 2249-2263.
[3]	陈巨辉, 张谦, 舒崚峰, 李丹, 徐鑫, 刘晓刚, 赵晨希, 曹希峰. 基于DEM方法的旋转流化床纳米颗粒流动特性研究[J]. 化工学报, 2023, 74(6): 2374-2381.
[4]	袁子涵, 王淑彦, 邵宝力, 谢磊, 陈曦, 马一玫. 基于幂律液固曳力模型流化床内湿颗粒流动特性的研究[J]. 化工学报, 2023, 74(5): 2000-2012.
[5]	王凯玥, 马永丽, 李琛, 刘明言. 气液固微型流化床的气液传质系数[J]. 化工学报, 2022, 73(8): 3529-3540.
[6]	张东旺, 杨海瑞, 周托, 黄中, 李诗媛, 张缦. 生物质锅炉对流受热面积灰冷态模拟实验研究[J]. 化工学报, 2022, 73(8): 3731-3738.
[7]	刘新华, 韩振南, 韩健, 梁斌, 张楠, 胡善伟, 白丁荣, 许光文. 基于热解与燃烧反应重构的低NO _x 解耦燃烧原理与技术[J]. 化工学报, 2022, 73(8): 3355-3368.
[8]	王刚, 夏志豪, 李希艳, 张虹, 韩振南, 宋兴飞, 许光文. 不同气氛下流化床菱镁矿轻烧产物特性研究[J]. 化工学报, 2022, 73(8): 3699-3707.
[9]	朱莲峰, 王超, 张梦娟, 刘方正, 贾鑫, 安萍, 许光文, 韩振南. 水蒸气/氧流化床两段煤气化制备低焦油合成气工艺实验[J]. 化工学报, 2022, 73(8): 3720-3730.
[10]	范小强, 黄正梁, 孙婧元, 王靖岱, 王晓飞, 胡晓波, 韩国栋, 阳永荣, 吴文清. 气液法流化床乙烯云聚合工艺开发及产品高性能化[J]. 化工学报, 2022, 73(6): 2742-2747.
[11]	马永丽, 刘明言, 胡宗定. 气液固流化床流动介尺度模型研究进展[J]. 化工学报, 2022, 73(6): 2438-2451.
[12]	牛犁, 刘梦溪, 王海北. 密相流化床中介尺度流动结构的流体力学特性研究[J]. 化工学报, 2022, 73(6): 2622-2635.
[13]	李铁男, 赵碧丹, 赵鹏, 张永民, 王军武. 气固流化床启动阶段挡板内构件受力特性的CFD-DEM模拟[J]. 化工学报, 2022, 73(6): 2649-2661.
[14]	徐劲松, 林敏, 陈晓平, 马吉亮, 耿鹏飞, 鲍学兵, 刘道银, 梁财. 不锈钢酸洗废混酸流化床焙烧再生特性的实验研究[J]. 化工学报, 2022, 73(5): 2242-2250.
[15]	葛世轶, 杨遥, 黄正梁, 孙婧元, 王靖岱, 阳永荣. 基于静电分选解析聚乙烯颗粒生长与形貌演变[J]. 化工学报, 2022, 73(4): 1585-1596.