化工学报 ›› 2017, Vol. 68 ›› Issue (11): 4309-4315.DOI: 10.11949/j.issn.0438-1157.20170497

• 能源和环境工程 • 上一篇    下一篇

镁热剂/铝热剂体系SHS法固化处理无钙焙烧铬渣

徐亚红1,2, 徐中慧1,2, 蒋灶1,2, 肖博1,2   

  1. 1 西南科技大学固体废物处理与资源化教育部重点实验室, 四川 绵阳 621010;
    2 西南科技大学非煤矿山安全技术四川省高等学校重点实验室, 四川 绵阳 621010
  • 收稿日期:2017-04-27 修回日期:2017-07-27 出版日期:2017-11-05 发布日期:2017-11-05
  • 通讯作者: 徐中慧
  • 基金资助:

    四川省教育厅青年基金项目(13ZB0183);固体废物处理与资源化教育部重点实验室专职科研创新团队建设基金项目(14tdgk04);固废资源化利用与节能建材国家重点实验室开放基金项目(SWR-2013-005)。

Immobilization of COPR from lime-free roasting process by self-propagating high-temperature synthesis of Al-Fe2O3 and Mg-Fe2O3 systems

XU Yahong1,2, XU Zhonghui1,2, JIANG Zao1,2, XIAO Bo1,2   

  1. 1 Key Laboratory of Solid Waste Treatment and Resource Recycle, Ministry of Education, Southwest University of Science and Technology, Mianyang 621010, Sichuan, China;
    2 Non-Coal Mine Safety Technology Key Laboratory of Sichuan Province Colleges and Universities, Southwest University of Science and Technology, Mianyang 621010, Sichuan, China
  • Received:2017-04-27 Revised:2017-07-27 Online:2017-11-05 Published:2017-11-05
  • Supported by:

    supported by the Sichuan Province Education Department Youth Fund Research Projects (13ZB0183), the Construction Fund of Full-time Research and Innovation Team of Key Laboratory of Solid Waste Treatment and Resource Recycle (14tdgk04) and the Open Fund of Solid Waste Reuse for Building Materials State Key Laboratory (SWR-2013-005).

摘要:

采用Al-Fe2O3(铝热剂)和Mg-Fe2O3(镁热剂)2种自蔓延高温合成体系(SHS)对无钙焙烧铬渣(COPR)进行固化处理,并通过浸出毒性试验对自蔓延产物的无害化效果进行评估。研究结果表明:2种反应体系均可实现铬渣的高效无害化,其中铝热剂体系和镁热剂体系铬渣含量分别高达80%和85%,其自蔓延产物浸取浓度ρ(总铬)和ρ(六价铬)分别低于4.5、1.5 mg·L-1,符合生活垃圾填埋场污染控制标准GB 16889-2008,可进行填埋处置。在SHS反应过程中,六价铬还原率均高于90%,还原后的六价铬主要以非晶形式弥散分布于自蔓延产物中,且部分铬离子参与MgAlCrO4尖晶石等矿物的形成,铬元素同时以物理和化学固定化的形式存在于自蔓延产物中。

关键词: 无钙焙烧铬渣, 自蔓延高温合成, 浸取, 还原, 固定化

Abstract:

Two self-propagation high-temperature synthesis systems (SHS), Al-Fe2O3 (thermite) and Mg-Fe2O3 (magnesium thermite), were utilized to immobilize the chromite ore processing residue (COPR) from lime-free roasting process. The solid waste-extraction procedure was adopted to evaluate the treatment efficiency of COPR. The results showed that the SHS was an effective remediation technology for COPR with maximum solidify rate of 80% and 85%, respectively. The leaching toxic concentrations of total Cr and Cr(Ⅵ) in solidified products were less than 4.5 and 1.5 mg·L-1 respectively, and the final products could be disposed in the landfill site according to GB 16889-2008. During the SHS process, the reduction rate of Cr(Ⅵ) was higher than 90% and the reducing substance was dispersed in the solidified products in the form of amorphous state. Meanwhile, parts of the chromium ions were participated in the formation of minerals such as MgAlCrO4 spinel. Eventually, the chromium element was incorporated into the wasteforms in the form of chemical immobilization and physical encapsulation.

Key words: COPR, SHS, leaching, reduction, immobilization

中图分类号: