化工学报 ›› 2018, Vol. 69 ›› Issue (9): 4083-4089.DOI: 10.11949/j.issn.0438-1157.20180284

• 材料化学工程与纳米技术 • 上一篇    下一篇

含氮杂环的酯或酰胺类衍生物的制备及其摩擦学性能

余磊1,2, 戴康徐2, 鲁浩2, 方岩雄1, 曹华3, 韩利芬2, 赵鸿斌2, 李诗娟2   

  1. 1. 广东工业大学轻工化工学院, 广东 广州 510000;
    2. 东莞理工学院化学工程与能源技术学院, 广东 东莞 523808;
    3. 佛山德联汽车用品有限公司, 广东 佛山 528247
  • 收稿日期:2018-03-16 修回日期:2018-06-04 出版日期:2018-09-05 发布日期:2018-09-05
  • 通讯作者: 方岩雄, 赵鸿斌
  • 基金资助:

    东莞市社会科技发展项目(2015108101003);广东省普通高校特色创新项目(2017KTSCX179,2015KTSCX136)。

Preparation and tribological properties of nitrogen-containing heterocyclic ester or amide derivatives

YU Lei1,2, DAI Kangxu2, LU Hao2, FANG Yanxiong1, CAO Hua3, HAN Lifen2, ZHAO Hongbin2, LI Shijuan2   

  1. 1. School of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou 510000, Guangdong, China;
    2. School of Chemical Engineering and Energy Technology, Dongguan University of Technology, Dongguan 523808, Guangdong, China;
    3. Foshan Delian Automotive Accessories Co. Ltd., Foshan 528247, Guangdong, China
  • Received:2018-03-16 Revised:2018-06-04 Online:2018-09-05 Published:2018-09-05
  • Supported by:

    supported by the Social Science and Technology Development Foundation of Dongguan(2015108101003) and the Characteristic Innovation Foundation of Ordinary Universities of Guangdong Province (2017KTSCX179, 2015KTSCX136).

摘要:

设计合成了4种含氮杂环的酯或酰胺类衍生物润滑油添加剂(Ⅰ~Ⅳ)。采用核磁共振氢谱(1H NMR)和飞行时间质谱(MALDI-TOF-MS)对所得产物的结构进行了表征;研究了4种添加剂的油溶性、热稳定性和抗腐蚀性;在四球摩擦磨损试验机上系统考察了添加剂在液体石蜡中的摩擦学性能;利用扫描电子显微镜(SEM)和能谱分析仪(EDS)观察和分析了钢球磨斑的表面形貌和元素组成。结果表明,4种添加剂均具有良好的油溶性、热稳定性和抗腐蚀性,当添加剂Ⅰ的质量分数达到1.0%时,钢球的磨斑直径(WSD)和摩擦系数分别比在液体石蜡中降低了33%和26%。SEM结果显示4种添加剂的加入能明显减小WSD,减少表面磨损,EDS结果表明添加剂在摩擦过程中形成了复杂的反应膜。

关键词: 合成, 润滑油添加剂, 磨损, 表面, 摩擦学性能

Abstract:

Four nitrogen heterocyclic ester or amide derivatives based lubricant additives, namely Ⅰ-Ⅳ, were designed and synthesized. The molecular structures were characterized by 1H NMR and MALDI-TOF-MS. The oil solubility, thermal stability and corrosion resistance of these additives were studied. The tribological properties of additives in liquid paraffin (LP) were systematically investigated on a four-ball test machine. The surfaces morphology and elementary composition of the worn scar were recorded on a scanning electron microscopy (SEM) and an energy dispersive spectroscopy (EDS). The results show that the four additives exhibit excellent oil solubility, high thermal stability and good corrosion resistance. When the addition of additive Ⅰ is 1% (mass fraction), the wear scar diameter (WSD) and coefficient of friction were 33% and 26% which are lower than that in non-added liquid paraffin. The SEM images suggest that the addition of all the four additives can significantly reduce WSD and decrease surface wear. The EDS results indicate that the additives formed a complex reaction film in the process of friction.

Key words: synthesis, lubricant additive, attrition, surface, tribological properties

中图分类号: