基于分形理论的翅片管气化器霜层热导率

doi:10.3969/j.issn.0438-1157.2012.12.017

化工学报 ›› 2012, Vol. 63 ›› Issue (12): 3855-3860.DOI: 10.3969/j.issn.0438-1157.2012.12.017

基于分形理论的翅片管气化器霜层热导率

陈叔平, 姚淑婷, 谢福寿, 韩宏茵, 常智新

兰州理工大学石油化工学院, 甘肃兰州 730050

收稿日期:2011-09-30 修回日期:2012-03-11 出版日期:2012-12-05 发布日期:2012-09-13
通讯作者: 陈叔平
作者简介:陈叔平(1964-),男,教授。
基金资助:
国家自然科学基金项目(51076061)。

Thermal conductivity of frost layer on finned-tube vaporizer based on fractal theory

CHEN Shuping, YAO Shuting, XIE Fushou, HAN Hongyin, CHANG Zhixin

College of Petrochemical Engineering, Lanzhou University of Technology, Lanzhou 730050, Gansu, China

Received:2011-09-30 Revised:2012-03-11 Online:2012-12-05 Published:2012-09-13
Supported by:
supported by the National Natural Science Foundation of China(51076061).

摘要/Abstract

摘要： 基于分形理论的DLA模型,数值模拟了翅片管气化器表面霜层生长过程,同时对霜层生长形态进行了实验观测,得到了不同时刻的霜层生长图像。计算了气化器表面霜层剖面孔隙面积分布分形维数与分形孔隙率,模拟图像与实验图像的对比表明两者取得良好的一致,验证了数值模拟的合理性。在此基础上建立了霜层导热的分形模型,采用热阻法给出了霜层热导率表达式。计算结果表明,用该方法确定的霜层热导率与实测得到的霜层有效热导率值域范围是相符的。并通过与其他导热模型的比较,验证了将剖面面积分布分形维数引入导热模型以确定霜层热导率的可行性,从而为霜层热导率的理论研究开辟了一条新路。

关键词: 翅片管气化器, 霜层, 热导率, 分形, 数值模拟

Abstract: A numerical simulation for frost formation and growth on the surface of finned-tube vaporizer was carried out based on the diffusion limited aggregation model of fractal theory,and images of frost formation and growth at different stages were obtained by experimental observations.For the frost layer profile on the surface of vaporizer,fractal dimension of pore area distribution and fractal porosity were calculated.The simulation results are in good agreement with experiments.Then the fractal model for heat conduction through the frost layer was established and the thermal resistance method was used to get an expression for thermal conductivity of frost layer.The result shows that the calculated thermal conductivity of frost layer falls in the range of measured data.Compared with other thermal conductivity models,the introduction of profile area distribution fractal dimension into the thermal conductivity model is appropriate,which is a new method for the theoretical study for thermal conductivity of frost layer.

Key words: finned-tube vaporizer, frost layer, thermal conductivity, fractal model, numerical simulation

中图分类号:

陈叔平, 姚淑婷, 谢福寿, 韩宏茵, 常智新. 基于分形理论的翅片管气化器霜层热导率[J]. 化工学报, 2012, 63(12): 3855-3860.

CHEN Shuping, YAO Shuting, XIE Fushou, HAN Hongyin, CHANG Zhixin. Thermal conductivity of frost layer on finned-tube vaporizer based on fractal theory[J]. CIESC Journal, 2012, 63(12): 3855-3860.

参考文献 19

[1]	Hayashi Y,Aoki A,Adachi S,Hori K.Study of frost properties correlating with frost formation types[J].Journal of Heat Transfer,1977,99(2):239-245
[2]	Biguria G O,Wenzel I A.Measurement and correlation of water frost thermal conductivity and density[J].I&EC Fundamentals,1970,9(1):129-138
[3]	Chen H,Besant R W,Tao Y X.Frost characteristics and heat transfer on a flat plate under freezer operating conditions(Ⅱ):Numerical modeling and comparison with data[J].ASHRAE Trans.,1999,105:252-259
[4]	Gu Xianghong(顾祥红),Kong Weixiu(孔维秀).Research progress of sublimation frosting physical model[J].Journal of Dalian University(大连大学学报),1999,20(6):34-38
[5]	Ahmet Z Sahin.Effective thermal conductivity of frost during the crystal growth period[J].International Journal of Heat and Mass Transfer,2000,43(4):539-553
[6]	Cheng Chin-Hsiang,Shiu Chiuan-che.Frost formation and frost crystal growth on a cold plate in atmospheric air flow[J].International Journal of Heat and Mass Transfer,2002,45(21):4289-4303
[7]	Tong Jungeng(童钧耕),Yang Zhibin(杨志斌),Fan Yunliang(范云良).Study on comprehensive thermal conductivity of frost layer[J].Cryogenics(低温工程),1996(5):46-50
[8]	Gu Xianghong(顾祥红),Meng Fanjiong(孟繁炯).Theoretical analysis of thermal conductivity in the frost layer[J].Journal of Engineering Thermophysics(工程热物理学报),2000,21(3):354-357
[9]	Cai Liang(蔡亮),Hou Puxiu(侯普秀),Li Shuhong(李舒宏),Yu Weiping(虞维平).Theoretical model of frost layer’s thermal conductivity at different porosity[J].Building Energy & Environment(建筑热能通风空调),2005,24(2):62-64
[10]	Cai Liang(蔡亮),Wang Ronghan(王荣汉),Hou Puxiu(侯普秀),Zhang Xiaosong(张小松).Computer simulation of frost growth and computation of its thermal conductivity[J].CIESC Journal(化工学报),2009,60(5):1111-1115
[11]	Kenneth Falconer.Fractal Geometry Mathematical Foundations and Applications(分形几何数学基础及其应用)[M].Zeng Wenqu(曾文曲),trans.2nd ed.Beijing:Posts &Telecom Press,2007:270-275
[12]	Chen Yongping(陈永平),Shi Mingheng(施明恒).Study on effective thermal conductivity of real porous media by using fractal theory[J].Journal of Applied Sciences(应用科学学报),2000,18(3):263-266
[13]	Hao Y L,Jose I,Yong X T.Experimental study of initial state of frost formation on flat surface[J].J. Southeast Uni.,2005,35(1):149-153
[14]	Hou P X,Cai L,Yu W P.Experimental study and fractal analysis of ice crystal structure at initial period of frost formation[J].Journal of Applied Sciences,2007,25(2):193-197
[15]	Chen Shuping(陈叔平),Yao Shuting(姚淑婷),Xie Fushou(谢福寿),Chang Zhixin(常智新),Han Hongyin(韩宏茵).Frost model and numerical simulation of air-heating fin-tube vaporizer[J].Cryogenics & Superconductivity(低温与超导),2011,39(11):64-67
[16]	Liu Wei(刘伟),Fan Aiwu(范爱武),Huang Xiaoming(黄晓明).Theory and Application of Porous Medium Heat and Mass Transfer(多孔介质传热传质理论与应用)[M].Beijing:Science Press,2006:335
[17]	Na B.Analysis of frost formation in an evaporator[D].USA:The Pennsylvania State University,2003
[18]	Chen Guobang(陈国邦),Jin Tao(金滔),Tang Ke(汤珂).Low Temperature Heat Transfer and Equipment(低温传热与设备)[M].Beijing:National Defence Industry Press,2008:12-13
[19]	Yonko D,Sepsy C F.An investigation of the thermal conductivity of frost while forming on a flat horizontal plate[J].ASHRAE Trans.,1967,73(2):1-10

基于分形理论的翅片管气化器霜层热导率

Thermal conductivity of frost layer on finned-tube vaporizer based on fractal theory

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 19

相关文章 15

编辑推荐

Metrics

本文评价

[1]	叶展羽, 山訸, 徐震原. 用于太阳能蒸发的折纸式蒸发器性能仿真[J]. 化工学报, 2023, 74(S1): 132-140.
[2]	张龙, 宋孟杰, 邵苛苛, 张旋, 沈俊, 高润淼, 甄泽康, 江正勇. 管翅式换热器迎风侧翅片末端霜层生长模拟研究[J]. 化工学报, 2023, 74(S1): 179-182.
[3]	张义飞, 刘舫辰, 张双星, 杜文静. 超临界二氧化碳用印刷电路板式换热器性能分析[J]. 化工学报, 2023, 74(S1): 183-190.
[4]	王志国, 薛孟, 董芋双, 张田震, 秦晓凯, 韩强. 基于裂隙粗糙性表征方法的地热岩体热流耦合数值模拟与分析[J]. 化工学报, 2023, 74(S1): 223-234.
[5]	宋嘉豪, 王文. 斯特林发动机与高温热管耦合运行特性研究[J]. 化工学报, 2023, 74(S1): 287-294.
[6]	张思雨, 殷勇高, 贾鹏琦, 叶威. 双U型地埋管群跨季节蓄热特性研究[J]. 化工学报, 2023, 74(S1): 295-301.
[7]	何松, 刘乔迈, 谢广烁, 王斯民, 肖娟. 高浓度水煤浆管道气膜减阻两相流模拟及代理辅助优化[J]. 化工学报, 2023, 74(9): 3766-3774.
[8]	邢雷, 苗春雨, 蒋明虎, 赵立新, 李新亚. 井下微型气液旋流分离器优化设计与性能分析[J]. 化工学报, 2023, 74(8): 3394-3406.
[9]	程小松, 殷勇高, 车春文. 不同工质在溶液除湿真空再生系统中的性能对比[J]. 化工学报, 2023, 74(8): 3494-3501.
[10]	刘文竹, 云和明, 王宝雪, 胡明哲, 仲崇龙. 基于场协同和耗散的微通道拓扑优化研究[J]. 化工学报, 2023, 74(8): 3329-3341.
[11]	洪瑞, 袁宝强, 杜文静. 垂直上升管内超临界二氧化碳传热恶化机理分析[J]. 化工学报, 2023, 74(8): 3309-3319.
[12]	韩晨, 司徒友珉, 朱斌, 许建良, 郭晓镭, 刘海峰. 协同处理废液的多喷嘴粉煤气化炉内反应流动研究[J]. 化工学报, 2023, 74(8): 3266-3278.
[13]	黄可欣, 李彤, 李桉琦, 林梅. 加装旋转叶轮T型通道流场的模态分解[J]. 化工学报, 2023, 74(7): 2848-2857.
[14]	史方哲, 甘云华. 超薄热管启动特性和传热性能数值模拟[J]. 化工学报, 2023, 74(7): 2814-2823.
[15]	朱兴驰, 郭志远, 纪志永, 汪婧, 张盼盼, 刘杰, 赵颖颖, 袁俊生. 选择性电渗析镁锂分离过程模拟优化[J]. 化工学报, 2023, 74(6): 2477-2485.