螺旋折流板换热器的协同角分布特性及局部换热特征

doi:10.3969/j.issn.0438-1157.2013.08.009

化工学报 ›› 2013, Vol. 64 ›› Issue (8): 2769-2773.DOI: 10.3969/j.issn.0438-1157.2013.08.009

螺旋折流板换热器的协同角分布特性及局部换热特征

张剑飞, 陶文铨, 何雅玲

西安交通大学能源与动力工程学院, 热流科学与工程教育部重点实验室, 陕西西安 710049

收稿日期:2012-12-19 修回日期:2013-04-07 出版日期:2013-08-05 发布日期:2013-08-05
通讯作者: 陶文铨
作者简介:张剑飞(1980- ),男,博士研究生。
基金资助:
国家自然科学基金项目(51206129);国家重点基础研究发展计划项目(2013CB228304)。

Field synergy angle distribution and local heat transfer characteristic in shell and tube heat exchanger with helical baffles

ZHANG Jianfei, TAO Wenquan, HE Yaling

Key Laboratory of Thermo-Fluid Science and Engineering, Ministry of Education, School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an 710049, Shaanxi, China

Received:2012-12-19 Revised:2013-04-07 Online:2013-08-05 Published:2013-08-05
Supported by:
supported by the National Natural Science Foundation of China(51206129) and the National Basic Research Program of China(2013CB228304).

摘要/Abstract

摘要： 采用商用软件GAMBIT和FLUENT对3种不同螺旋角的螺旋折流板换热器周期性模型进行了三维数值模拟计算分析。计算发现40°角模型的Nusselt数最高而平均协同角最小,结论符合场协同原理。揭示了螺旋折流板换热器内场协同角的分布特征,发现螺旋折流板换热器整场的场协同角分布相当均匀。同时,对螺旋折流板换热器内不同区域的局部换热特征进行了研究,发现中心区域的换热强度随Reynolds数逐渐增强。

关键词: 螺旋折流板换热器, 周期性模型, 换热特性, 场协同, 数值模拟

Abstract: Three dimensional numerical simulation and field synergy principle analysis were conducted with simplified periodic models for shell and tube heat exchangers with helical baffles at three helix angles(30?,40癮nd 50?),and commercial codes of GAMBIT 2.3 and FLUENT 6.3 were adopted in the simulation.It is found that Nusselt number from the model with 40? angle is the largest and the predicted average field synergy intersection angle is the smallest,which is consistent with the field synergy principle.The distribution characteristics of field synergy angles reveal that the distribution is quite uniform through whole shell side of the exchangers.The investigation on local heat transfer characteristics in different regions on the shell side shows that the heat transfer rate in the central region of the heat exchanger increases with the increase of Reynolds number.

Key words: shell and tube heat exchanger with helical baffles, periodic model, heat transfer characteristic, field synergy principle, numerical simulation

中图分类号:

TK124

张剑飞, 陶文铨, 何雅玲. 螺旋折流板换热器的协同角分布特性及局部换热特征[J]. 化工学报, 2013, 64(8): 2769-2773.

ZHANG Jianfei, TAO Wenquan, HE Yaling. Field synergy angle distribution and local heat transfer characteristic in shell and tube heat exchanger with helical baffles[J]. CIESC Journal, 2013, 64(8): 2769-2773.

参考文献 25

[1]	Master B I,Chunangad K S,Pushpanathan V.Fouling mitigation using helixchanger heat exchangers//Proceedings of the ECI Conference on Heat Exchanger Fouling and Cleaning:Fundamentals and Applications[C].Santa Fe,NM,2003:317-322
[2]	Lutcha J,Nemcansky J.Performance improvement of tubular heat exchangers by helical baffles[J].Chemical Engineering Research & Design,1990,68(A):263-270
[3]	Stehlik P,Nemcansky J,Kral D.Comparison of correction factors for shell-and-tube heat exchangers with segmental or helical baffles[J].Heat Transfer Engineering,1994,15(1):55-65
[4]	Kral D,Stelik P,van der Ploeg H J,Masster B I.Helical baffles in shell-and-tube heat exchangers(Ⅰ): Experimental verification[J].Heat Transfer Engineering,1996,17(1):93-101
[5]	Zhang Zhengguo,Xu Tao,Fang Xiaoming.Experimental study on heat transfer enhancement of a helically baffled heat exchanger combined with three-dimensional finned tubes[J].Applied Thermal Engineering,2004,24(14/15):2293-2300
[6]	Peng Botao,Wang Qiuwang,Zhang Chao,Xie Gongnan,Luo Laiqin,Chen Qiuyang,Zeng Min.An experimental study of shell-and-tube heat exchangers with continuous helical baffles[J].ASME Journal of Heat Transfer,2007,129:1425-1431
[7]	Lei Yonggang,He Yaling,Chu Pan,Li Rui.Design and optimization of heat exchangers with helical baffles[J].Chemical Engineering Science,2008,63:4386-4395
[8]	Zhang Jianfei(张剑飞),Li Bin(李斌),Huang Wenjiang(黄文江),Lei Yonggang(雷勇刚),Chu Pan(楚攀),Li Rui(李瑞),He Yaling(何雅玲),Tao Wenquan(陶文铨).Experiment analysis on the flow and heat transfer characteristics in helical baffled shell-and-tube heat exchangers[J].Journal of Engineering Thermophysics (工程热物理学报),2009,30(1):147-149
[9]	Andrews M J,Master B I.Three-dimensional modeling of a helixchanger heat exchanger using CFD[J].Heat Transfer Engineering,2005,26:22-31
[10]	Shen Renjie,Feng Xiao,Gao Xiaodong.Mathematical model and numerical simulation of helical baffles heat exchanger[J].Journal of Enhanced Heat Transfer,2004,11:461-466
[11]	Jafari Nasr M R,Shafeghat A.Fluid flow analysis and extension of rapid design algorithm for helical baffle heat exchangers[J].Applied Thermal Engineering,2008,28:1324-1332
[12]	Zhang Jianfei,Li Bin,Huang Wenjiang,Lei Yonggang,He Yaling,Tao Wenquan.Experimental performance comparison of shell side heat transfer for shell-and-tube heat exchangers with middle-overlapped helical baffles and segmental baffles[J].Chemical Engineering Science,2009,64(8):1643-1653
[13]	Zhang Jianfei,He Yaling,Tao Wenquan.3D Numerical simulation on shell-and-tube heat exchangers with middle-overlapped helical baffles and continuous baffles(Ⅰ):Numerical model and results of whole heat exchanger with middle-overlapped helical baffles[J].International Journal of Heat and Mass Transfer,2009,52(23/24): 5371-5380
[14]	Zhang Jianfei,He Yaling,Tao Wenquan.3D Numerical simulation on shell-and-tube heat exchangers with middle-overlapped helical baffles and continuous baffles(Ⅱ):Simulation results of periodic model and comparison between continuous and non-continuous helical baffles[J].International Journal of Heat and Mass Transfer,2009,52(23/24):5381-5389
[15]	Wang Qiuwang,Chen Guidong,Zeng Min,Chen Qiuyang,Peng Botao,Zhang Dongjie,Luo Laiqin.Shell-side heat transfer enhancement for shell-and-tube heat exchangers by helical baffles[J].Chemical Engineering Transactions,2010,21:217-222
[16]	Chen Guidong,Zeng Min,Wang Qiuwang,Qi Shize. Numerical studies on combined parallel multiple shell-pass shell-and-tube heat exchangers with continuous helical baffles[J].Chemical Engineering Transactions,2010,21:229-234
[17]	Cao Xing(曹兴),Du Wenjing(杜文静),Ji Shui(汲水),Cheng Lin(程林).Effects of baffle connection manner on shell-side performance of heat exchanger with helical baffles[J].CIESC Journal(化工学报),2011,62(12):3367-3372
[18]	Dong Cong(董聪),Chen Yaping(陈亚平),Wu Jiafeng(吴嘉峰),Cao Ruibing(操瑞兵),Sheng Yanjun(盛艳军),Ni Minglong(倪明龙).Water to water heat transfer on shell-side of trisection helical baffle heat exchangers[J].CIESC Journal(化工学报),2012,63(3):721-727
[19]	Farhad N T,Sirous Z M,Kazem R,Reza T A.Baffle space impact on the performance of helical baffle shell and tube heat exchangers[J].Applied Thermal Engineering,2012,44:143-149
[20]	Chen Yaping,Sheng Yanjun,Dong Cong,Wu Jiafeng. Numerical simulation on flow field in circumferential overlap trisection helical baffle heat exchanger[J].Applied Thermal Engineering,2013,50(1):1035-1043
[21]	Yakhot V,Orszag S A.Renormalization group analysis of turbulence(Ⅰ):Basic theory[J].Journal of Scientific Computing,1986,1:3-11
[22]	Tao Wenquan(陶文铨).Numerical Heat Transfer (数值传热学)[M].2nd ed.Xi'an:Xi'an Jiaotong University Press,2001
[23]	Guo Zengyuan,Li Deyu,Wang Buxuan.A novel concept for convective heat transfer enhancement[J].International Journal of Heat and Mass Transfer,1998,41:2221-2225
[24]	Guo Zengyuan,Tao Wenquan,Shah R K.The field synergy (coordination)principle and its applications in enhancing single phase convective heat transfer[J].International Journal of Heat and Mass Transfer,2005,48:1797-1807
[25]	Zhou Junjie(周俊杰).Research on the mechanisms of heat enhancement and saving energy on compact heat exchanger surface and its optimization[D].Xi'an:Xi'an Jiaotong University,2005

螺旋折流板换热器的协同角分布特性及局部换热特征

Field synergy angle distribution and local heat transfer characteristic in shell and tube heat exchanger with helical baffles

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 25

相关文章 15

编辑推荐

Metrics

本文评价

[1]	叶展羽, 山訸, 徐震原. 用于太阳能蒸发的折纸式蒸发器性能仿真[J]. 化工学报, 2023, 74(S1): 132-140.
[2]	张义飞, 刘舫辰, 张双星, 杜文静. 超临界二氧化碳用印刷电路板式换热器性能分析[J]. 化工学报, 2023, 74(S1): 183-190.
[3]	王志国, 薛孟, 董芋双, 张田震, 秦晓凯, 韩强. 基于裂隙粗糙性表征方法的地热岩体热流耦合数值模拟与分析[J]. 化工学报, 2023, 74(S1): 223-234.
[4]	宋嘉豪, 王文. 斯特林发动机与高温热管耦合运行特性研究[J]. 化工学报, 2023, 74(S1): 287-294.
[5]	张思雨, 殷勇高, 贾鹏琦, 叶威. 双U型地埋管群跨季节蓄热特性研究[J]. 化工学报, 2023, 74(S1): 295-301.
[6]	何松, 刘乔迈, 谢广烁, 王斯民, 肖娟. 高浓度水煤浆管道气膜减阻两相流模拟及代理辅助优化[J]. 化工学报, 2023, 74(9): 3766-3774.
[7]	邢雷, 苗春雨, 蒋明虎, 赵立新, 李新亚. 井下微型气液旋流分离器优化设计与性能分析[J]. 化工学报, 2023, 74(8): 3394-3406.
[8]	程小松, 殷勇高, 车春文. 不同工质在溶液除湿真空再生系统中的性能对比[J]. 化工学报, 2023, 74(8): 3494-3501.
[9]	刘文竹, 云和明, 王宝雪, 胡明哲, 仲崇龙. 基于场协同和耗散的微通道拓扑优化研究[J]. 化工学报, 2023, 74(8): 3329-3341.
[10]	洪瑞, 袁宝强, 杜文静. 垂直上升管内超临界二氧化碳传热恶化机理分析[J]. 化工学报, 2023, 74(8): 3309-3319.
[11]	韩晨, 司徒友珉, 朱斌, 许建良, 郭晓镭, 刘海峰. 协同处理废液的多喷嘴粉煤气化炉内反应流动研究[J]. 化工学报, 2023, 74(8): 3266-3278.
[12]	黄可欣, 李彤, 李桉琦, 林梅. 加装旋转叶轮T型通道流场的模态分解[J]. 化工学报, 2023, 74(7): 2848-2857.
[13]	史方哲, 甘云华. 超薄热管启动特性和传热性能数值模拟[J]. 化工学报, 2023, 74(7): 2814-2823.
[14]	于源, 陈薇薇, 付俊杰, 刘家祥, 焦志伟. 几何相似涡流空气分级机环形区流场变化规律研究及预测[J]. 化工学报, 2023, 74(6): 2363-2373.
[15]	张媛媛, 曲江源, 苏欣欣, 杨静, 张锴. 循环流化床燃煤机组SNCR脱硝过程气液传质和反应特性[J]. 化工学报, 2023, 74(6): 2404-2415.