二甲苯模拟移动床分离过程建模与仿真

doi:10.3969/j.issn.0438-1157.2013.12.010

化工学报 ›› 2013, Vol. 64 ›› Issue (12): 4335-4341.DOI: 10.3969/j.issn.0438-1157.2013.12.010

二甲苯模拟移动床分离过程建模与仿真

杨明磊, 魏民, 胡蓉, 叶贞成, 钱锋

华东理工大学化工过程先进控制和优化技术教育部重点实验室, 上海 200237

收稿日期:2013-05-31 修回日期:2013-07-20 出版日期:2013-12-05 发布日期:2013-12-05
通讯作者: 钱锋
作者简介:杨明磊（1985- ），男，博士后。
基金资助:
国家重点基础研究发展计划项目（2012CB720500）；国家自然科学基金项目（U1162202，21206037，61222303）；国家高技术研究发展计划项目（2013AA040701）；上海市重点学科建设项目（B504）；中国博士后基金项目（2013M531143）。

Modeling of simulated moving bed for xylene separation

YANG Minglei, WEI Min, HU Rong, YE Zhencheng, QIAN Feng

Key Laboratory of Advanced Control and Optimization for Chemical Process, Ministry of Education, East China University of Science and Technology, Shanghai 200237, China

Received:2013-05-31 Revised:2013-07-20 Online:2013-12-05 Published:2013-12-05
Supported by:
supported by the National Basic Research Program of China (2012CB720500)，the National Natural Science Foundation of China (U1162202，21206037，61222303)，the High-tech Research and Development Program of China (2013AA040701),Shanghai Leading Academic Discipline Project (B504) and the Postdoctoral Science Foundation of China (2013M531143).

摘要/Abstract

摘要： 模拟移动床（SMB）是混合二甲苯分离的重要技术。模拟移动床区域回流比是决定产品质量的关键参数。在真实移动床（TMB）建模方法基础上，结合实际工况数据，建立了模拟移动床吸附分离过程机理模型，并通过分析区域回流比对产品质量的影响，得到不同产品质量要求以及进料品质的情况下区域回流比的操作区间。仿真结果表明，TMB建模方法能较好地描述模拟移动床实际工况。基于机理模型对操作区间的分析结果可以为模拟移动床分离过程的工艺设计和操作提供指导意见。

关键词: 二甲苯, 移动床, 吸附, 分离, 仿真

Abstract: Simulated moving bed (SMB) is an important technology in xylene isomers separation.The reflux ratios of SMB in each zone are of key importance in determining the purity and recovery of PX.On the basis of the true moving bed (TMB) modeling scheme and industrial data,the SMB mechanism model is established.The operation interval for the reflux ratio is obtained via analyzing the effect of reflux ratio on the purity and recovery of PX product.The results show that the TMB modeling scheme performs great in describing the industrial SMB,and the analysis based on the mechanism model facilitates the design and operation of a SMB for PX separation.

Key words: xylene, moving bed, adsorption, separation, modeling

中图分类号:

TQ028.3

杨明磊, 魏民, 胡蓉, 叶贞成, 钱锋. 二甲苯模拟移动床分离过程建模与仿真[J]. 化工学报, 2013, 64(12): 4335-4341.

YANG Minglei, WEI Min, HU Rong, YE Zhencheng, QIAN Feng. Modeling of simulated moving bed for xylene separation[J]. CIESC Journal, 2013, 64(12): 4335-4341.

参考文献 20

[1]	Wei Junqiang (魏军强), Xu Qin (许琴).Application of simulated moving bed technology in the production of paraxylene[J].Liaoning Chemical Industry (辽宁化工), 2009, 38 (10):746-747
[2]	Furlan L T, Chaves B C, Santana C C. Separation of liquid mixtures of p-xylene and o-xylene in X-zeolites:the role of water content on the adsorbent selectivity[J].Ind. Eng. Chem.Res., 1992, 31 (7):1780-1784
[3]	Shi Dapeng (施大鹏), Yu Jinshou (俞金寿).Modeling and simulation of C8 aromatics adsorption separation process[J].Journal of East China University of Science and Technology (华东理工大学学报), 2005, 31 (3):354-357
[4]	Mohameed H A, Jdayil B A, Takrouri K. Separation of para-xylene from xylene mixture via crystallization[J].Chem.Eng.Process, 2007, 46 (1):25-36
[5]	Shiau L D, Wen C C, Lin B S. Separation of p-xylene from the multicomponent xylene system by stripping crystallization[J].AIChE J., 2008, 54 (1):337-342
[6]	Ruthven D M, Ching C B.Counter-current and simulated counter-current adsorption separation processes[J].Chem. Eng.Sci., 1989, 44 (5):1011-1038
[7]	Wang Huiguo (王辉国), Wang Dehua (王德华), Ma Jianfeng (马剑锋), Yu Zhuo (郁灼), Wang Jianwei (王建伟).Adsorption stripping of p-xylene on RAX-2000A adsorbent in small-scale simulated moving bed[J].Petrochemical Technology (石油化工), 2005, 34 (9):850-854
[8]	Wu Xiandong (吴献东), Jin Xiaoming (金晓明), Su Hongye (苏宏业).Multi-objective optimization of simulated moving bed chromatography separation based on NSGA-Ⅱ algorithm[J].Journal of Chemical Industry and Engineering (China) (化工学报), 2007, 58 (8):2038-2044
[9]	Wang Dehua (王德华), Wang Huiguo (王辉国).Progress of simulated moving-bed technology[J].Chemical Industry and Engineering Progress (化工进展), 2004, 23 (6):609-614
[10]	Gu Jinsheng (顾金生), Jiang Weisun (蒋慰孙). Modelling the simulated moving bed parex process[J].Journal of Chemical Industry and Engineering (China) (化工学报), 1996, 47 (4):439-446
[11]	Wei Feng, Shen Bo, Chen Mingjie, Zhou Xianbo, Zhao Yingxian.Separation of α-tocopherol with a two-feed simulated moving bed[J].Chinese Journal of Chemical Engineering, 2012, 20 (4):673-678
[12]	Wei Feng, Shen Bo, Chen Mingjie, Zhao Yingxian, Shao Liping.Modeling on a modified feeding mode of simulated moving bed for improving productivity[J].Chinese Journal of Chemical Engineering, 2010, 18 (2):239-243
[13]	Kawajiri Y, Biegler L T. Optimization strategies for simulated moving bed and PowerFeed processes[J].AIChE J., 2006, 52 (4):1343-1350
[14]	Minceva M, Rodrigues A E. Modeling and simulation of a simulated moving bed for the separation of p-xylene[J].Ind.Eng.Chem.Res., 2002, 41 (14):3454-3461
[15]	Minceva M, Rodrigues A E. Understanding and revamping of industrial scale SMB units for p-xylene separation[J].AIChE J., 2007, 53 (1):138-149
[16]	Storti G, Mazzotti M, Morbidelli M, Carrà S. Robust design of binary countercurrent adsorption separation processes[J].AIChE J., 1993, 39 (3):471-492
[17]	Mazzotti M, Storti G, Morbidelli M. Robust design of countercurrent adsorption separation processes (Ⅱ):Multicomponent systems[J].AIChE J., 1994, 40 (11):1825-1842
[18]	Zhang Ying, Su Hongye, Chu Jian.Association rules mining based on SVM and its application in simulated moving bed PX adsorption process[J].Chinese Journal of Chemical Engineering, 2005, 13 (6):751-757
[19]	Pais L S, Loureiro J M, Rodrigues A E. Modeling strategies for enantiomers separation by SMB chromatography[J].AIChE J., 1998, 44 (3):561-569
[20]	Ruthven D M. Principles of Adsorption and Adsorption Processes[M]. Wiley-InterScience, 1984:106

二甲苯模拟移动床分离过程建模与仿真

Modeling of simulated moving bed for xylene separation

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 20

相关文章 15

编辑推荐

Metrics

本文评价

[1]	杨欣, 王文, 徐凯, 马凡华. 高压氢气加注过程中温度特征仿真分析[J]. 化工学报, 2023, 74(S1): 280-286.
[2]	宋嘉豪, 王文. 斯特林发动机与高温热管耦合运行特性研究[J]. 化工学报, 2023, 74(S1): 287-294.
[3]	张思雨, 殷勇高, 贾鹏琦, 叶威. 双U型地埋管群跨季节蓄热特性研究[J]. 化工学报, 2023, 74(S1): 295-301.
[4]	晁京伟, 许嘉兴, 李廷贤. 基于无管束蒸发换热强化策略的吸附热池的供热性能研究[J]. 化工学报, 2023, 74(S1): 302-310.
[5]	黄琮琪, 吴一梅, 陈建业, 邵双全. 碱性电解水制氢装置热管理系统仿真研究[J]. 化工学报, 2023, 74(S1): 320-328.
[6]	赵亚欣, 张雪芹, 王荣柱, 孙国, 姚善泾, 林东强. 流穿模式离子交换层析去除单抗聚集体[J]. 化工学报, 2023, 74(9): 3879-3887.
[7]	杨学金, 杨金涛, 宁平, 王访, 宋晓双, 贾丽娟, 冯嘉予. 剧毒气体PH₃的干法净化技术研究进展[J]. 化工学报, 2023, 74(9): 3742-3755.
[8]	刘爽, 张霖宙, 许志明, 赵锁奇. 渣油及其组分黏度的分子层次组成关联研究[J]. 化工学报, 2023, 74(8): 3226-3241.
[9]	高燕, 伍鹏, 尚超, 胡泽君, 陈晓东. 基于双流体喷嘴的磁性琼脂糖微球的制备及其蛋白吸附性能探究[J]. 化工学报, 2023, 74(8): 3457-3471.
[10]	邢雷, 苗春雨, 蒋明虎, 赵立新, 李新亚. 井下微型气液旋流分离器优化设计与性能分析[J]. 化工学报, 2023, 74(8): 3394-3406.
[11]	张佳怡, 何佳莉, 谢江鹏, 王健, 赵鹬, 张栋强. 渗透汽化技术用于锂电池生产中N-甲基吡咯烷酮回收的研究进展[J]. 化工学报, 2023, 74(8): 3203-3215.
[12]	盛冰纯, 于建国, 林森. 铝基锂吸附剂分离高钠型地下卤水锂资源过程研究[J]. 化工学报, 2023, 74(8): 3375-3385.
[13]	张瑞航, 曹潘, 杨锋, 李昆, 肖朋, 邓春, 刘蓓, 孙长宇, 陈光进. ZIF-8纳米流体天然气乙烷回收工艺的产品纯度关键影响因素分析[J]. 化工学报, 2023, 74(8): 3386-3393.
[14]	陈吉, 洪泽, 雷昭, 凌强, 赵志刚, 彭陈辉, 崔平. 基于分子动力学的焦炭溶损反应及其机理研究[J]. 化工学报, 2023, 74(7): 2935-2946.
[15]	张缘良, 栾昕奇, 苏伟格, 李畅浩, 赵钟兴, 周利琴, 陈健民, 黄艳, 赵祯霞. 离子液体复合萃取剂选择性萃取尼古丁的研究及DFT计算[J]. 化工学报, 2023, 74(7): 2947-2956.