三叶孔板换热器壳程传热与压降

doi:10.3969/j.issn.0438-1157.2014.10.010

化工学报 ›› 2014, Vol. 65 ›› Issue (10): 3811-3819.DOI: 10.3969/j.issn.0438-1157.2014.10.010

三叶孔板换热器壳程传热与压降

郭震¹, 郎红方², 周帼彦¹, 朱凌云¹, 杨锦春², 朱辉¹, 朱冬生¹

1 华东理工大学承压系统与安全教育部重点实验室, 上海 200237;
2 深圳中广核工程设计有限公司, 广东深圳 518031

收稿日期:2013-12-26 修回日期:2014-07-08 出版日期:2014-10-05 发布日期:2014-10-05
通讯作者: 周帼彦

Shell-side heat transfer and pressure drop of shell-and-tube heat exchanger with trefoil-hole baffles

GUO Zhen¹, LANG Hongfang², ZHOU Guoyan¹, ZHU Lingyun¹, YANG Jinchun², ZHU Hui¹, ZHU Dongsheng¹

1 Key Laboratory of Pressure Systems and Safety, Ministry of Education, East China University of Science and Technology, Shanghai 200237, China;
2 China Nuclear Power Design Co., Ltd., Shenzhen 518031, Guangdong, China

Received:2013-12-26 Revised:2014-07-08 Online:2014-10-05 Published:2014-10-05

摘要/Abstract

摘要： 三叶孔板换热器是一种新型纵向流换热器，由于其具有传热效率高、压降低、抗振结构性能优越等诸多优点而广泛应用于核电行业。搭建三叶孔板换热器壳程传热与压降测试平台，对传热和压降的测量结果进行不确定度分析。对4台三叶孔板换热器模型进行实验研究，结果表明随着Reynolds数的增大，壳程对流传热系数和压降在对数坐标内线性增大；在Reynolds数相同的情况下，随着支撑板间距的增大，三叶孔板换热器壳程Nusselt数逐渐减小，压降逐渐降低，同时压力梯度逐渐减小。为了进一步分析说明三叶孔板换热器壳程传热与阻力性能，基于Bell-Delaware法设计了具有相同结构参数的折流板换热器。与折流板换热器的对比结果表明：三叶孔板换热器壳程Nusselt数平均为折流板换热器的1.25倍，壳程整体压力平均为折流板换热器的0.77，综合性能平均为折流板换热器的1.62倍。

关键词: 三叶孔板, 支撑板间距, 对流, 模型, 传热, 压降

Abstract: Shell-and-tube heat exchanger with trefoil-hole baffles (STHX-TH) is a new type of longitudinal-flow heat exchanger which is widely used in nuclear industry due to its higher heat transfer efficiency, lower pressure, superior anti-vibration performance and many other advantages. In order to analyze the thermal-hydraulic performance of STHX-TH, an experimental test platform was established. Then four STHXs-TH with different baffle spaces were tested. The experimental data were reliable and accurate. Heat transfer coefficient and pressure drop decreased linearly with increasing Reynolds number in double logarithmic coordinates. Heat transfer coefficient and pressure drop decreased with increasing baffle space at the same Reynolds number. With the same mass flow, pressure gradient decreased with increasing baffle space. In order to comparatively understand the shell-side heat transfer and pressure drop performance of STHX-TH, a shell-and-tube heat exchanger with segmental baffles (STHX-SB) with similar geometric parameters with STHX-TH (No.2) was designed. Shell-side heat transfer coefficient and pressure drop of STHX-SB were calculated with the Bell-Delaware method, and compared with those of STHX-TH. The comparative study showed that convective heat transfer coefficient of STHX-TH was 1.25 times of that of STHX-SB, pressure drop of STHX-TH was 0.77 time of that of STHX-SB, and Nu_s/Δp_s of STHX-TH was 1.62 times of that of STHX-SB.

Key words: trefoil-hole baffle, baffle space, convection, model, heat transfer, pressure drop

中图分类号:

TK124

郭震, 郎红方, 周帼彦, 朱凌云, 杨锦春, 朱辉, 朱冬生. 三叶孔板换热器壳程传热与压降[J]. 化工学报, 2014, 65(10): 3811-3819.

GUO Zhen, LANG Hongfang, ZHOU Guoyan, ZHU Lingyun, YANG Jinchun, ZHU Hui, ZHU Dongsheng. Shell-side heat transfer and pressure drop of shell-and-tube heat exchanger with trefoil-hole baffles[J]. CIESC Journal, 2014, 65(10): 3811-3819.

参考文献 15

[1]	Zhu Dongsheng (朱冬生), Qian Songwen (钱颂文), Ma Xiaoming (马小明), Sun Ping (孙萍), Luo Xiaoping (罗小平), Wang Yangjun (王杨君). Development of Heat Exchanger Technology (换热器技术及进展) [M]. Beijing: China Petrochemical Press, 2008: 3-8
[2]	Dong Qiwu (董其伍), Liu Minshan (刘敏珊). Heat Exchanger with Longitudinal Flow of Shell-side (纵流壳程换热器) [M]. Beijing: Chemical Industry Press, 2007: 1-13
[3]	Mills A F. Heat Transfer [M]. 2nd ed. New Jersey: Prentice Hall, Inc., 1999: 2-48
[4]	Wang Yingshuang, Liu Zhichun, Huang Suyi, Liu Wei, Li Weiwei. Experimental investigation of shell-and-tube heat exchanger with a new type of baffles [J]. Heat Mass Transfer, 2011, 47 (7): 833-839
[5]	Li H, Kottke V. Analysis of local shell side heat transfer in the shell-and-tube heat exchanger with disc- and doughnut baffles [J]. International Journal of Heat and Mass Transfer, 1999, 42 (18): 3509-3521
[6]	Gentry C C. ROD baffle heat exchanger technology [J]. Chem.Eng.Prog., 1990, 86 (7): 48-57
[7]	Sheng Yanjun (盛艳军), Chen Yaping (陈亚平), Cao Ruibing (操瑞兵),Dong Cong (董聪), Wu Jiafeng (吴嘉峰). Experimental study on shell-side heat transfer and flow resistance performance of heat exchanger with non-round orifice baffles [J]. Journal of Southeast University: Natural Science Edition (东南大学学报: 自然科学版), 2012,42 (2): 318-322
[8]	Luo Xiaoping (罗小平), Deng Xianhe (邓先和), Deng Songjiu (邓颂九). Research on flow resistance of ring support heat exchanger with longitudinal fluid flow on shell side [J]. Journal of Chemical Industry and Engineering (China) (化工学报), 1999, 50 (1): 130-135
[9]	Dong Qiwu (董其伍),Bai Caipeng (白彩鹏),Liu Minshan (刘敏珊),Wang Dan (王丹). Study on flow and heat transfer of shellside of heat exchangers with trefoil baffle//Heat and Mass Transfer at the Chinese Academy of Engineering Thermal Physics Learning Academic Conference Proceedings [C]. Xi’an: Chinese Society of Engineering Thermophysics, 2011: 1-5
[10]	Dong Qiwu (董其伍), Du Qingfei (杜庆飞), Liu Minshan (刘敏珊), Wang Yongqing (王永庆). Numerical research on flow and heat transfer characteristics in shell-side of heat exchanger with trefoil-tube-support [J]. Process Equipment & Piping (化工设备与管道), 2012, 49 (2): 21-24
[11]	You Yonghua, Fan Aiwu, Lai Xuejiang, Huang Suyi, Liu Wei. Experimental and numerical investigations of shell-side thermo-hydraulic performances for shell-and-tube heat exchanger with trefoil-hole baffles [J]. Applied Thermal Engineering, 2013, 50 (1): 950-956
[12]	Jiao Lan (焦兰). Experimental study and numerical simulation of heat exchanger with triporate full circular supporting structures [D].Wuhan: Huazhong University of Science and Technology, 2011
[13]	Zhu Lingyun (朱凌云), Lang Hongfang (郎红方), Zhou Guoyan (周帼彦), Guo Zhen (郭震), Tan Xianghui (谭祥辉), Yang Jinchun (杨锦春), Zhu Dongshen (朱冬生). Numerical investigation on shell side fluid flow and heat transfer performance of the heat exchanger with trefoil-baffles [J]. CIESC Journal (化工学报), 2014, 65 (3): 829-835
[14]	Gu Xin (古新), Pan Guohua (潘国华), Liu Minshan (刘敏珊), Wang Yongqing (王永庆). Optimal design of trefoil-baffle support heat exchanger based on genetic algorithm [J]. Process Vessel Technology (压力容器), 2013, 30 (7): 12-17
[15]	Yang Shiming (杨世铭), Tao Wenquan (陶文铨). Heat Transfer (传热学) [M]. 3rd ed. Beijing: Higher Education Press, 1998: 164-171[16] Yuan Junpeng (袁俊朋). Bell-based method of shell and tube heat exchangers proration theoretical studies and experimental analysis [D]. Shanghai: East China University of Science and Technology, 2009

三叶孔板换热器壳程传热与压降

Shell-side heat transfer and pressure drop of shell-and-tube heat exchanger with trefoil-hole baffles

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 15

相关文章 15

编辑推荐

Metrics

本文评价

[1]	张双星, 刘舫辰, 张义飞, 杜文静. R-134a脉动热管相变蓄放热实验研究[J]. 化工学报, 2023, 74(S1): 165-171.
[2]	张义飞, 刘舫辰, 张双星, 杜文静. 超临界二氧化碳用印刷电路板式换热器性能分析[J]. 化工学报, 2023, 74(S1): 183-190.
[3]	陈爱强, 代艳奇, 刘悦, 刘斌, 吴翰铭. 基板温度对HFE7100液滴蒸发过程的影响研究[J]. 化工学报, 2023, 74(S1): 191-197.
[4]	刘明栖, 吴延鹏. 导光管直径和长度对传热影响的模拟分析[J]. 化工学报, 2023, 74(S1): 206-212.
[5]	王志国, 薛孟, 董芋双, 张田震, 秦晓凯, 韩强. 基于裂隙粗糙性表征方法的地热岩体热流耦合数值模拟与分析[J]. 化工学报, 2023, 74(S1): 223-234.
[6]	江河, 袁俊飞, 王林, 邢谷雨. 均流腔结构对微细通道内相变流动特性影响的实验研究[J]. 化工学报, 2023, 74(S1): 235-244.
[7]	宋嘉豪, 王文. 斯特林发动机与高温热管耦合运行特性研究[J]. 化工学报, 2023, 74(S1): 287-294.
[8]	晁京伟, 许嘉兴, 李廷贤. 基于无管束蒸发换热强化策略的吸附热池的供热性能研究[J]. 化工学报, 2023, 74(S1): 302-310.
[9]	连梦雅, 谈莹莹, 王林, 陈枫, 曹艺飞. 地下水预热新风一体化热泵空调系统制热性能研究[J]. 化工学报, 2023, 74(S1): 311-319.
[10]	金正浩, 封立杰, 李舒宏. 氨水溶液交叉型再吸收式热泵的能量及分析[J]. 化工学报, 2023, 74(S1): 53-63.
[11]	程成, 段钟弟, 孙浩然, 胡海涛, 薛鸿祥. 表面微结构对析晶沉积特性影响的格子Boltzmann模拟[J]. 化工学报, 2023, 74(S1): 74-86.
[12]	李艺彤, 郭航, 陈浩, 叶芳. 催化剂非均匀分布的质子交换膜燃料电池操作条件研究[J]. 化工学报, 2023, 74(9): 3831-3840.
[13]	王玉兵, 李杰, 詹宏波, 朱光亚, 张大林. R134a在菱形离散肋微小通道内的流动沸腾换热实验研究[J]. 化工学报, 2023, 74(9): 3797-3806.
[14]	李科, 文键, 忻碧平. 耦合蒸气冷却屏的真空多层绝热结构对液氢储罐自增压过程的影响机制研究[J]. 化工学报, 2023, 74(9): 3786-3796.
[15]	王浩, 王振雷. 基于自适应谱方法的裂解炉烧焦模型化简策略[J]. 化工学报, 2023, 74(9): 3855-3864.