基于黏弹性热流固耦合作用的模内微装配成型过程数值模拟

doi:10.11949/j.issn.0438-1157.20160767

化工学报 ›› 2017, Vol. 68 ›› Issue (3): 1129-1137.DOI: 10.11949/j.issn.0438-1157.20160767

基于黏弹性热流固耦合作用的模内微装配成型过程数值模拟

周国发, 阳培民, 罗智, 江先念

南昌大学资源环境与化工学院, 江西南昌 330031

收稿日期:2016-06-02 修回日期:2016-11-09 出版日期:2017-03-05 发布日期:2017-03-05
通讯作者: 周国发,ndzgfy@163.com
基金资助:
国家自然科学基金项目（21464009）。

Numerical simulation on in-mold micro assembly molding process based on viscoelastic thermal fluid structure coupling

ZHOU Guofa, YANG Peimin, LUO Zhi, JIANG Xiannian

School of Resources, Environmental and Chemical Engineering, Nanchang University, Nanchang 330031, Jiangxi, China

Received:2016-06-02 Revised:2016-11-09 Online:2017-03-05 Published:2017-03-05
Contact: 10.11949/j.issn.0438-1157.20160767
Supported by:
supported by the National Natural Science Foundation of China (21464009).

摘要/Abstract

摘要：

模内微装配成型技术有望成为高效低成本产业化聚合物微小机械系统制造技术，而如何准确预测和精确控制热流固耦合变形仍是其工业化的技术瓶颈。为此研究建立了考虑二次黏弹性熔体充填流动边界约束作用的模内微装配成型黏弹性热流固耦合变形的理论预测模型，研究表明热流固耦合变形受控于微装配面所承受的热流固耦合压力、黏弹性支撑正应力、黏性摩擦拖曳剪切应力和微型轴的抗变形刚度，且随成型熔体注射速度提高而减小，而微型轴近表面局部跨越393 K区域的PMMA刚度急剧下降是导致微型轴热流固耦合变形随熔体注射速度增加而减小的主控因素。

关键词: 黏弹性, 模内微装配成型, 热流固耦合, 数值模拟, 聚合物, 加工制造

Abstract:

In-mold micro assembly molding technology should be expected to be high efficiency low cost industrialized manufacturing technology of polymer micro-mechanical systems, but how to predict accurately and control precisely thermal-fluid-structure coupling deformation still is its industrialized technical bottlenecks of in-mold micro assembly molding technology. The theoretical prediction model of viscoelastic thermal-fluid-structure coupling deformation in molding process was established based on the boundary constraints of secondary viscoelastic melt filling flow. Research shows that viscoelastic thermal-fluid-structure coupling deformation is controlled by the coupling pressure, viscoelastic supporting normal stress, viscous friction drag shear stress on the micro assembly interface and anti-deformation stiffness, and will reduce with increasing of melt injection speed. The PMMA anti-deformation stiffness in near-surface local region exceeded 393 K will be drastically reduced, which is the key control factor of thermal-fluid-structure coupling deformation reducing with melt injection speed increasing.

Key words: viscoelasticity, in-mold micro assembly molding, thermal-fluid-structure coupling, numerical simulation, polymers, fabrication

中图分类号:

TQ320.66

周国发, 阳培民, 罗智, 江先念. 基于黏弹性热流固耦合作用的模内微装配成型过程数值模拟[J]. 化工学报, 2017, 68(3): 1129-1137.

ZHOU Guofa, YANG Peimin, LUO Zhi, JIANG Xiannian. Numerical simulation on in-mold micro assembly molding process based on viscoelastic thermal fluid structure coupling[J]. CIESC Journal, 2017, 68(3): 1129-1137.

参考文献 20

[1]	ANANTHANARAYANAN A, GUPTA S K, BRUCK H A. Modeling and characterization to minimize effects of melt flow fronts on premolded component deformation during in-mold assembly of mesoscale revolute joints[J]. Journal of Manufacturing Science and Engineering, Transactions of the ASME, 2010, 13(4):0410061-0410069.
[2]	ANANTHANARAYANAN A, GUPTA S K, BRUCK H A. Characterization and control of plastic deformation in mesoscale premolded components to realize in-mold assembled mesoscale revolute joints[J]. Polymer Engineering and Science, 2009, 49(2):293-304.
[3]	ANANTHANARAYANAN A, GUPTA S K, BRUCK H A. Characterization of a reverse molding sequence at the mesoscale for in-mold assembly of revolute joints[J]. Polymer Engineering and Science, 2010, 50(9):1843-1852.
[4]	WOJCIEH B. In-mold assembly of multi-functional structures[D]. Maryland:University of Maryland, 2010.
[5]	ISLAM A, HANSEN H, MARHÖFER M, et al. Two-component micro injection moulding for hearing aid applications[J]. International Journal of Advanced Manufacturing Technology, 2012, 62(5/6/7/8):605-615.
[6]	MICHAELI W, KAMPS T. Micro assembly injection moulding with plasma treated inserts[J]. Microsyst Technol, 2008, 14(12):1903-1907.
[7]	ATTIA U M, HAUATA M, WALTON I, et al. Creating movable interfaces by micro-powder injection moulding[J]. Journal of Materials Processing Technology, 2014, 214(2):295-303.
[8]	PIOTTER V, PROKOP J, RITZHAUPT H J, et al. Multi-component microinjection moulding-trends and developments[J]. International Journal of Advanced Manufacturing Technology, 2010, 47(1/2/3/4):63-71.
[9]	周国发, 胡舵, 刘岑. 剪切变稀效应对微型机械模内组装成型流固耦合变形的影响[J]. 高分子材料科学与工程, 2012, 28(12):183-186. ZHOU G F, HU D, LIU C. Influence of shear-thinning on polymer micromachine fluid-solid coupling deformation in in-mold assmbly molding process[J]. Polymer Materials Science and Engineering, 2012, 28(12):183-186.
[10]	周国发, 王文光, 刘岑. 过程参数对微型机械模内组装成型流固耦合变形影响[J]. 塑性工程学报, 2012, 19(1):107-112. ZHOU G F, WANG W G, LIU C. Influence of process parameters polymer on micromachine fluid-solid coupling deformation in in-mold assembly molding process[J]. Journal of Plasticity Engineering, 2012, 19(1):107-112.
[11]	杨亮. 共注射不相容材料模内装配技术的应用和技术分析[D]. 上海:上海交通大学, 2010. YANG L. Analysis and application of incompatible materials coinjection in-mold assembly technology[D]. Shanghai:Shanghai Jiao Tong University, 2010.
[12]	董红军. 微小塑料铰链注射模内装配工艺及成型装置的研究[D]. 大连:大连理工大学, 2012. DONG H J. Research on process and apparatus of in-mold micro assembly molding of the micro plastic hinge[D]. Dalian:Dalian University of Technology, 2012.
[13]	张巍. 微小塑料机构模内装配注塑成型关键技术研究[D]. 大连:大连理工大学, 2015. ZHANG W. Research on key technology of in-mold micro assembly molding of the micro plastic hinge[D]. Dalian:Dalian University of Technology, 2015.
[14]	周国发, 王梅媚, 张宇.聚合物多相分层流动黏弹性包围机制的数值模拟研究[J].复合材料学报, 2014, 31(6):1618-1625. ZHOU G F, WANG M M, ZANG Y. The numerical simulation on the mechanism of viscoelastic encapsulation in polymer multiphase stratified flows[J]. Acta Materiae Compositae Sinica, 2014, 31(6):1618-1625.
[15]	RAJAGOPALAN D, ARRMSTRONG R C, BROWN R A. Finite element methods for calculation of steady viscoelastic flow using constitutive equations with a Newtonian viscosity[J]. Journal of Non-Newtonian Fluid Mechanics, 1990, 36:159-192.
[16]	周文彦, 周国发. 聚合物多层气辅共挤精密成型机制的数值分析[J]. 复合材料学报, 2009, 26(3):90-98. ZHOU W Y, ZHOU G F. Numerical investigation on the mechanism of polymer multilayer gas assisted co-extrusion precision molding process[J]. Acta Materiae Compositae Sinica, 2009, 26(3):90-98.
[17]	江先念. 多场耦合作用下模内微组装成型机理研究[D]. 南昌:南昌大学, 2016 JIANG X N. Research on the mechanism of in-mold micro assembly molding under multi-physical field coupling effect[D]. Nanchang:Nanchang University, 2016.
[18]	周国发, 江先念, 杨先鲁. 微型机械运动副模内微组装成型热-流-固耦合变形数值模拟[J]. 中国塑料, 2015, 29(9):60-66. ZHOU G F, JIANG X N, YANG X L. The Numerical simulation on thermal-fluid-structure coupling deformation of the polymer micromechanical notion pair in-mold micro assembly molding process[J]. China Plastics, 2015, 29(9):60-66.
[19]	杨先鲁. 聚合物微型机械模内组装成型过程数值模拟研究[D]. 南昌:南昌大学, 2013. YANG X L. Numerical simulation research on the process of polymer micro-machine in-mold assembly molding[D]. Nanchang:Nanchang University, 2013.
[20]	刘岑. 聚合物微型机械模内组装成型机理研究[D]. 南昌:南昌大学, 2011. LIU C. Research on the mechanism of polymer micromachine in-mold assembly molding[D]. Nanchang:Nanchang University, 2011.

基于黏弹性热流固耦合作用的模内微装配成型过程数值模拟

Numerical simulation on in-mold micro assembly molding process based on viscoelastic thermal fluid structure coupling

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献 20

相关文章 15

编辑推荐

Metrics

本文评价

[1]	叶展羽, 山訸, 徐震原. 用于太阳能蒸发的折纸式蒸发器性能仿真[J]. 化工学报, 2023, 74(S1): 132-140.
[2]	张义飞, 刘舫辰, 张双星, 杜文静. 超临界二氧化碳用印刷电路板式换热器性能分析[J]. 化工学报, 2023, 74(S1): 183-190.
[3]	王志国, 薛孟, 董芋双, 张田震, 秦晓凯, 韩强. 基于裂隙粗糙性表征方法的地热岩体热流耦合数值模拟与分析[J]. 化工学报, 2023, 74(S1): 223-234.
[4]	宋嘉豪, 王文. 斯特林发动机与高温热管耦合运行特性研究[J]. 化工学报, 2023, 74(S1): 287-294.
[5]	张思雨, 殷勇高, 贾鹏琦, 叶威. 双U型地埋管群跨季节蓄热特性研究[J]. 化工学报, 2023, 74(S1): 295-301.
[6]	何松, 刘乔迈, 谢广烁, 王斯民, 肖娟. 高浓度水煤浆管道气膜减阻两相流模拟及代理辅助优化[J]. 化工学报, 2023, 74(9): 3766-3774.
[7]	邢雷, 苗春雨, 蒋明虎, 赵立新, 李新亚. 井下微型气液旋流分离器优化设计与性能分析[J]. 化工学报, 2023, 74(8): 3394-3406.
[8]	韩晨, 司徒友珉, 朱斌, 许建良, 郭晓镭, 刘海峰. 协同处理废液的多喷嘴粉煤气化炉内反应流动研究[J]. 化工学报, 2023, 74(8): 3266-3278.
[9]	程小松, 殷勇高, 车春文. 不同工质在溶液除湿真空再生系统中的性能对比[J]. 化工学报, 2023, 74(8): 3494-3501.
[10]	刘文竹, 云和明, 王宝雪, 胡明哲, 仲崇龙. 基于场协同和耗散的微通道拓扑优化研究[J]. 化工学报, 2023, 74(8): 3329-3341.
[11]	洪瑞, 袁宝强, 杜文静. 垂直上升管内超临界二氧化碳传热恶化机理分析[J]. 化工学报, 2023, 74(8): 3309-3319.
[12]	黄可欣, 李彤, 李桉琦, 林梅. 加装旋转叶轮T型通道流场的模态分解[J]. 化工学报, 2023, 74(7): 2848-2857.
[13]	史方哲, 甘云华. 超薄热管启动特性和传热性能数值模拟[J]. 化工学报, 2023, 74(7): 2814-2823.
[14]	王杰, 丘晓琳, 赵烨, 刘鑫洋, 韩忠强, 许雍, 蒋文瀚. 聚电解质静电沉积改性PHBV抗氧化膜的制备与性能研究[J]. 化工学报, 2023, 74(7): 3068-3078.
[15]	刘杰, 吴立盛, 李锦锦, 罗正鸿, 周寅宁. 含乙烯基胺酯键聚醚类可逆交联聚合物的制备及性能研究[J]. 化工学报, 2023, 74(7): 3051-3057.